ramips: mt7620a: convert to nvmem-layout

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_edimax_3g-6200n.dts

diff --git a/target/linux/ramips/dts/rt3050_edimax_3g-6200n.dts b/target/linux/ramips/dts/rt3050_edimax_3g-6200n.dts
index bb9c1dbf61c70cf9140317b308f752e4a89d712a..62686b5489bf7b46943fdb081dbc8561d34dd81e 100644 (file)
--- a/target/linux/ramips/dts/rt3050_edimax_3g-6200n.dts
+++ b/target/linux/ramips/dts/rt3050_edimax_3g-6200n.dts
@@ -1,9 +1,8 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
@@ -43,6 +42,20 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@3e0000 {
@@ -52,7 +65,9 @@
                        };
 
                        partition@50000 {
-                               compatible = "edimax,uimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,offset = <FW_EDIMAX_OFFSET>;
+                               openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
                                label = "firmware";
                                reg = <0x50000 0x390000>;
                        };
@@ -63,17 +78,17 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "3g-6200n:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "3g-6200n:amber:wlan";
+                       label = "amber:wlan";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                3g {
-                       label = "3g-6200n:blue:3g";
+                       label = "blue:3g";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&otg_port1>;
                        linux,default-trigger = "usbport";
@@ -106,7 +121,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -114,7 +130,8 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &otg {