ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_edimax_3g-6200nl.dts

diff --git a/target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts b/target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts
index 41768078f5fcc4006ec034c1b2f3a11ee37427a9..3767afb4527c9b961329095dc368320da854d97a 100644 (file)
--- a/target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts
+++ b/target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
        compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
@@ -50,7 +51,9 @@
                        };
 
                        partition@50000 {
-                               compatible = "edimax,uimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
+                               openwrt,offset = <FW_EDIMAX_OFFSET>;
+                               openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
                                label = "firmware";
                                reg = <0x50000 0x390000>;
                        };
@@ -91,7 +94,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -105,3 +109,13 @@
 &otg {
        status = "okay";
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
+};