ramips: add support for SNR-CPE-ME2-SFP

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_sparklan_wcr-150gn.dts

diff --git a/target/linux/ramips/dts/rt3050_sparklan_wcr-150gn.dts b/target/linux/ramips/dts/rt3050_sparklan_wcr-150gn.dts
index a2f763cb8bbeb4c671cbaf32f1274a249e76dea4..c00feb42889604de1c980451d8a5bdb8f75e4566 100644 (file)
--- a/target/linux/ramips/dts/rt3050_sparklan_wcr-150gn.dts
+++ b/target/linux/ramips/dts/rt3050_sparklan_wcr-150gn.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -16,7 +14,7 @@
                led-upgrade = &led_power;
        };
 
-       cfi@1f000000 {
+       flash@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
@@ -57,14 +55,14 @@
                compatible = "gpio-leds";
 
                user {
-                       label = "wcr-150gn:amber:user";
+                       label = "amber:user";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&otg_port1>;
                        linux,default-trigger = "usbport";
                };
 
                led_power: power {
-                       label = "wcr-150gn:amber:power";
+                       label = "amber:power";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
        };
@@ -87,17 +85,16 @@
        };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+               function = "gpio";
        };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -105,9 +102,19 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
 };
 
 &otg {
        status = "okay";
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
+};