ramips: add support for MeiG SLT866 4G CPE

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3052_petatel_psr-680w.dts

diff --git a/target/linux/ramips/dts/rt3052_petatel_psr-680w.dts b/target/linux/ramips/dts/rt3052_petatel_psr-680w.dts
index 260d0a14441956545a4afdc9484598dcba12ddac..d88892f2fafa593edc59db8f61cba51ce663f7bc 100644 (file)
--- a/target/linux/ramips/dts/rt3052_petatel_psr-680w.dts
+++ b/target/linux/ramips/dts/rt3052_petatel_psr-680w.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -20,7 +18,7 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       cfi@1f000000 {
+       flash@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
@@ -44,9 +42,20 @@
                        };
 
                        factory: partition@40000 {
+                               compatible = "nvmem-cells";
                                label = "factory";
                                reg = <0x40000 0x10000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
+
+                               macaddr_factory_4: macaddr@4 {
+                                       reg = <0x4 0x6>;
+                               };
                        };
 
                        partition@50000 {
@@ -61,7 +70,7 @@
                compatible = "gpio-leds";
 
                led_wan: wan {
-                       label = "psr-680w:red:wan";
+                       label = "red:wan";
                        gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
                };
        };
@@ -78,17 +87,16 @@
        };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+               function = "gpio";
        };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -96,7 +104,8 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &otg {