ramips: use fixed layout cell "mac-base" for Netgear R6220

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3052_planex_mzk-w300nh2.dts

diff --git a/target/linux/ramips/dts/rt3052_planex_mzk-w300nh2.dts b/target/linux/ramips/dts/rt3052_planex_mzk-w300nh2.dts
index eb565527420e9c101b8ed125f557163824266387..779443e70e2c90b480e429d31cbea414bacb6c83 100644 (file)
--- a/target/linux/ramips/dts/rt3052_planex_mzk-w300nh2.dts
+++ b/target/linux/ramips/dts/rt3052_planex_mzk-w300nh2.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -63,17 +61,17 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "mzk-w300nh2:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "mzk-w300nh2:amber:wlan";
+                       label = "amber:wlan";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                wps {
-                       label = "mzk-w300nh2:amber:wps";
+                       label = "amber:wps";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
        };
@@ -110,7 +108,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -120,3 +119,13 @@
 &wmac {
        ralink,mtd-eeprom = <&factory 0x0>;
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
+};