ramips: Add support for Cudy WR1300 v3

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3052_prolink_pwh2004.dts

diff --git a/target/linux/ramips/dts/rt3052_prolink_pwh2004.dts b/target/linux/ramips/dts/rt3052_prolink_pwh2004.dts
index 24a8346bc82d99a6a1e7b7ae5ef6ca2dfe4de24d..1b30dc9dd0a10cb1956d37e2b6e10c173f888f70 100644 (file)
--- a/target/linux/ramips/dts/rt3052_prolink_pwh2004.dts
+++ b/target/linux/ramips/dts/rt3052_prolink_pwh2004.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "rt3050.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -16,7 +14,7 @@
                led-upgrade = &led_power;
        };
 
-       cfi@1f000000 {
+       flash@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
@@ -40,9 +38,16 @@
                        };
 
                        factory: partition@40000 {
+                               compatible = "nvmem-cells";
                                label = "factory";
                                reg = <0x40000 0x10000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
                        };
 
                        partition@50000 {
@@ -57,12 +62,12 @@
                compatible = "gpio-leds";
 
                wifi {
-                       label = "pwh2004:red:wifi";
+                       label = "red:wifi";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                led_power: power {
-                       label = "pwh2004:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
        };
@@ -91,5 +96,6 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };