ramips: add support for PCI based OHCI/EHCI support for F5D8235 V1

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3352.dtsi

diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi
index 0f64576b1eaf7cf47b6cdb69d231da1f97747012..a617281b751096319913cddf3f90be72cfc1a6b2 100644 (file)
--- a/target/linux/ramips/dts/rt3352.dtsi
+++ b/target/linux/ramips/dts/rt3352.dtsi
@@ -146,6 +146,42 @@
                        status = "disabled";
                };
 
+               i2c@900 {
+                       compatible = "ralink,rt2880-i2c";
+                       reg = <0x900 0x100>;
+
+                       resets = <&rstctrl 16>;
+                       reset-names = "i2c";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c_pins>;
+               };
+
+               i2s@a00 {
+                       compatible = "ralink,rt3352-i2s";
+                       reg = <0xa00 0x100>;
+
+                       resets = <&rstctrl 17>;
+                       reset-names = "i2s";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <10>;
+
+                       txdma-req = <2>;
+                       rxdma-req = <3>;
+
+                       dmas = <&gdma 4>,
+                               <&gdma 6>;
+                       dma-names = "tx", "rx";
+
+                       status = "disabled";
+               };
+
                spi0: spi@b00 {
                        compatible = "ralink,rt3352-spi", "ralink,rt2880-spi";
                        reg = <0xb00 0x40>;
@@ -191,6 +227,23 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&uartlite_pins>;
                };
+
+               gdma: gdma@2800 {
+                       compatible = "ralink,rt3883-gdma";
+                       reg = <0x2800 0x800>;
+
+                       resets = <&rstctrl 14>;
+                       reset-names = "dma";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <7>;
+
+                       #dma-cells = <1>;
+                       #dma-channels = <16>;
+                       #dma-requests = <16>;
+
+                       status = "disabled";
+               };
        };
 
        pinctrl: pinctrl {
@@ -202,6 +255,13 @@
                state_default: pinctrl0 {
                };
 
+               i2c_pins: i2c {
+                       i2c {
+                               ralink,group = "i2c";
+                               ralink,function = "i2c";
+                       };
+               };
+
                spi_pins: spi {
                        spi {
                                ralink,group = "spi";