ramips: add support for SNR-CPE-ME2-SFP

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3662_omnima_hpm.dts

diff --git a/target/linux/ramips/dts/rt3662_omnima_hpm.dts b/target/linux/ramips/dts/rt3662_omnima_hpm.dts
index c542079e21aa7b35c8f29be1e896af383a40fffe..84ca468e3d2a5894ed5abd2bc72ff8be02acde38 100644 (file)
--- a/target/linux/ramips/dts/rt3662_omnima_hpm.dts
+++ b/target/linux/ramips/dts/rt3662_omnima_hpm.dts
@@ -33,34 +33,34 @@
                compatible = "gpio-leds";
 
                power {
-                       label = "hpm:orange:power";
+                       label = "orange:power";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                led_status: status {
-                       label = "hpm:green:status";
+                       label = "green:status";
                        gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                eth {
-                       label = "hpm:green:eth";
+                       label = "green:eth";
                        gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
                };
 
                eth2 {
-                       label = "hpm:red:eth";
+                       label = "red:eth";
                        gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                };
 
                wifi {
-                       label = "hpm:green:wifi";
+                       label = "green:wifi";
                        gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                };
 
                wifi2 {
-                       label = "hpm:red:wifi";
+                       label = "red:wifi";
                        gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
                };
        };
@@ -134,7 +134,8 @@
 &ethernet {
        phy-handle = <&phy0>;
        phy-mode = "rgmii";
-       mtd-mac-address = <&factory 0x28>;
+       nvmem-cells = <&macaddr_factory_28>;
+       nvmem-cell-names = "mac-address";
 
        mdio-bus {
                status = "okay";
@@ -156,3 +157,13 @@
 &ohci {
        status = "okay";
 };
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_28: macaddr@28 {
+               reg = <0x28 0x6>;
+       };
+};