ramips: convert rt2x00 EEPROM to NVMEM format

[openwrt/openwrt.git] / target / linux / ramips / dts / rt5350_planex_mzk-dp150n.dts

diff --git a/target/linux/ramips/dts/rt5350_planex_mzk-dp150n.dts b/target/linux/ramips/dts/rt5350_planex_mzk-dp150n.dts
index f683a05efbba61311d0d37ec93ff7ba394809f18..0ff8cd7e1acac115a7afeb6a07a8063cf37f79f7 100644 (file)
--- a/target/linux/ramips/dts/rt5350_planex_mzk-dp150n.dts
+++ b/target/linux/ramips/dts/rt5350_planex_mzk-dp150n.dts
@@ -18,7 +18,7 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "mzk-dp150n:green:power";
+                       label = "green:power";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
        };
@@ -35,10 +35,6 @@
        };
 };
 
-&gpio1 {
-       status = "okay";
-};
-
 &spi0 {
        status = "okay";
 
@@ -65,9 +61,20 @@
                        };
 
                        factory: partition@40000 {
+                               compatible = "nvmem-cells";
                                label = "factory";
                                reg = <0x40000 0x10000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
+
+                               macaddr_factory_4: macaddr@4 {
+                                       reg = <0x4 0x6>;
+                               };
                        };
 
                        partition@50000 {
@@ -95,7 +102,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -103,6 +111,7 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
        ralink,led-polarity = <1>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };