ramips: add support for Wavlink WL-WN531G3

[openwrt/openwrt.git] / target / linux / ramips / mt7620 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 63f7e41ac2e33fd2f5fdb8f5e2e2c4e4164cccd8..d23ec7632722c5dfe6a29c31778fe0404e0eed4a 100644 (file)
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -253,6 +253,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch1" \
                        "0:lan:3" "1:lan:2" "2:lan:1" "4:lan:4" "3:wan" "7@eth0"
                ;;
+       wavlink,wl-wn531g3)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "5:lan:1" "4:wan" "6@eth0"
+               ;;
        wavlink,wl-wn535k1)
                ucidef_add_switch "switch0" \
                        "2:lan:2" "5:lan:1" "4:wan" "6@eth0"
@@ -426,13 +430,14 @@ ramips_setup_macs()
        tplink,ec220-g5-v2)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1)
                ;;
+       wavlink,wl-wn531g3|\
+       zbtlink,zbt-we1026-5g-16m)
+               label_mac=$(mtd_get_mac_binary factory 0x4)
+               ;;
        wavlink,wl-wn535k1)
                wan_mac=$(mtd_get_mac_binary factory 0x2e)
                label_mac=$(mtd_get_mac_binary factory 0x8004)
                ;;
-       zbtlink,zbt-we1026-5g-16m)
-               label_mac=$(mtd_get_mac_binary factory 0x4)
-               ;;
        zyxel,keenetic-lite-iii-a)
                lan_mac=$(mtd_get_mac_binary RF-EEPROM 0x4)
                wan_mac=$(mtd_get_mac_binary RF-EEPROM 0x28)