ramips: add support for TP-Link Deco M4R v4

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index cef5d55925c806f8fbabfe07dfd8985b67da1f52..3a864f6f04d63759b29387d3e1c4387b0896c0b9 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -8,9 +8,13 @@ ramips_setup_interfaces()
        local board="$1"
 
        case $board in
+       arcadyan,we420223-99)
+               ucidef_set_interface_lan "swp0 swp1"
+               ;;
        ampedwireless,ally-00x19k|\
        asus,rp-ac56|\
        asus,rp-ac87|\
+       dlink,dap-x1860-a1|\
        edimax,re23s|\
        mikrotik,ltap-2hnd|\
        mikrotik,routerboard-m11g|\
@@ -50,6 +54,7 @@ ramips_setup_interfaces()
                ;;
        asiarf,ap7621-001|\
        humax,e10|\
+       wavlink,ws-wn572hp3-4g|\
        winstars,ws-wn583a6)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
@@ -67,7 +72,8 @@ ramips_setup_interfaces()
        xiaomi,mi-router-3g|\
        xiaomi,mi-router-3g-v2|\
        xiaomi,mi-router-4|\
-       xiaomi,mi-router-4a-gigabit)
+       xiaomi,mi-router-4a-gigabit|\
+       xiaomi,mi-router-4a-gigabit-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
                ;;
        bolt,arion)
@@ -77,6 +83,11 @@ ramips_setup_interfaces()
                uci add_list firewall.@zone[1].network='eth_data'
                uci add_list firewall.@zone[1].network='eth_om'
                ;;
+       cudy,m1800|\
+       yuncore,ax820|\
+       zyxel,nt7101)
+               ucidef_set_interfaces_lan_wan "lan" "wan"
+               ;;
        gnubee,gb-pc1)
                ucidef_set_interface_lan "ethblack ethblue"
                ;;
@@ -94,10 +105,16 @@ ramips_setup_interfaces()
        mikrotik,routerboard-760igs)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
                ;;
+       tplink,deco-m4r-v4)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ;;
        tplink,eap235-wall-v1|\
        tplink,eap615-wall-v1)
                ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
                ;;
+       tplink,er605-v2)
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
+               ;;
        tplink,tl-wpa8631p-v3)
                ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
                ;;
@@ -113,10 +130,6 @@ ramips_setup_interfaces()
        ubnt,usw-flex)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
                ;;
-       yuncore,ax820|\
-       zyxel,nr7101)
-               ucidef_set_interfaces_lan_wan "lan" "wan"
-               ;;
        zyxel,wap6805)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
@@ -144,6 +157,11 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
                label_mac=$lan_mac
                ;;
+       arcadyan,we420223-99)
+               label_mac=$(mtd_get_mac_ascii board_data mac)
+               lan_mac=$label_mac
+               ucidef_set_network_device_mac eth0 $(macaddr_add "$label_mac" 3)
+       ;;
        asus,rt-ac65p|\
        asus,rt-ac85p)
                wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
@@ -168,6 +186,7 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                ;;
+       elecom,wrc-2533ghbk2-t|\
        elecom,wrc-2533ghbk-i)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
@@ -219,10 +238,22 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
                wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
                label_mac=$lan_mac
+               ;;
        mikrotik,ltap-2hnd)
                label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
                lan_mac=$label_mac
                ;;
+       tplink,ec330-g5u-v1)
+               label_mac="$(mtd_get_mac_text factory 0x165)"
+               lan_mac=$label_mac
+               wan_mac=$(macaddr_add $label_mac 1)
+               ;;
+       tplink,er605-v2)
+               CI_UBIPART="firmware"
+               label_mac=$(mtd_get_mac_uci_config_ubi "tddp")
+               lan_mac=$label_mac
+               wan_mac=$(macaddr_add "$label_mac" 1)
+               ;;
        tplink,mr600-v2-eu)
                label_mac=$(cat "/sys/class/net/eth0/address")
                wwan_mac=$(macaddr_add $label_mac 1)