ramips: Add support for Xiaomi Redmi Router AC2100 (RM2100)

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index d73305981f922038d120969405900a6f9bb74df8..ba9f7fb7b61337f6890943b9c77686613c037d34 100755 (executable)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,14 +14,15 @@ ramips_setup_interfaces()
                ;;
        asiarf,ap7621-nv1|\
        lenovo,newifi-d1|\
-       mikrotik,rbm33g|\
+       mikrotik,routerboard-m33g|\
        xiaomi,mir3g|\
        xiaomi,mir3g-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
                ;;
        gehua,ghl-r-001|\
        hiwifi,hc5962|\
-       xiaomi,mir3p)
+       xiaomi,mir3p|\
+       xiaomi,redmi-router-ac2100)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
                ;;
        gnubee,gb-pc1|\
@@ -31,7 +32,7 @@ ramips_setup_interfaces()
        linksys,re6500)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ;;
-       mikrotik,rbm11g|\
+       mikrotik,routerboard-m11g|\
        netgear,ex6150|\
        thunder,timecloud|\
        tplink,re350-v1|\
@@ -39,13 +40,15 @@ ramips_setup_interfaces()
        ubnt,unifi-nanohd)
                ucidef_set_interface_lan "lan"
                ;;
-       mikrotik,rb750gr3)
+       mikrotik,routerboard-750gr3)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
                ;;
-       ubiquiti,edgerouterx|\
-       ubiquiti,edgerouterx-sfp)
+       ubnt,edgerouter-x)
                ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4"
                ;;
+       ubnt,edgerouter-x-sfp)
+               ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4 eth5"
+               ;;
        *)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
@@ -89,9 +92,17 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                label_mac=$wan_mac
                ;;
-       mikrotik,rb750gr3|\
-       mikrotik,rbm33g)
-               label_mac=$(mtd_get_mac_binary hard_config 0x10)
+       linksys,ea7500-v2)
+               lan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               wan_mac=$lan_mac
+               label_mac=$lan_mac
+               ;;
+       mikrotik,routerboard-750gr3|\
+       mikrotik,routerboard-m11g|\
+       mikrotik,routerboard-m33g)
+               label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
+               wan_mac=$label_mac
+               lan_mac=$(macaddr_add $label_mac 1)
                ;;
        zbtlink,zbt-we1326|\
        zbtlink,zbt-wg3526-16m|\