realtek: re-enable sfp driver for ZyXEL GS1900-10HP

[openwrt/openwrt.git] / target / linux / realtek / dts / rtl8380_zyxel_gs1900-10hp.dts

diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
index 92d0e25fc477e88c7a745b0a7edfe4fff3a87dac..c16028788ea4e86ace725b7dc2cedbb046b894cc 100644 (file)
--- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
+++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
@@ -17,7 +17,7 @@
        };
 
        sfp0: sfp-p9 {
-               compatible = "_sff,sfp";
+               compatible = "sff,sfp";
                i2c-bus = <&i2c0>;
                los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
                tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
@@ -36,7 +36,7 @@
        };
 
        sfp1: sfp-p10 {
-               compatible = "_sff,sfp";
+               compatible = "sff,sfp";
                i2c-bus = <&i2c1>;
                los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
                tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
@@ -55,29 +55,17 @@
                port@24 {
                        reg = <24>;
                        label = "lan9";
-                       phy-mode = "rgmii-id";
-                       phy-handle = <&phy24>;
+                       phy-mode = "1000base-x";
+                       managed = "in-band-status";
                        sfp = <&sfp0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                               pause;
-                       };
                };
 
                port@26 {
                        reg = <26>;
                        label = "lan10";
-                       phy-mode = "rgmii-id";
-                       phy-handle = <&phy26>;
+                       phy-mode = "1000base-x";
+                       managed = "in-band-status";
                        sfp = <&sfp1>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                               pause;
-                       };
                };
        };
 };