rtl838x: d-link_dgs-1210: refactor common family bits

[openwrt/staging/ynezz.git] / target / linux / rtl838x / dts / rtl8382_d-link_dgs-1210-16.dts

diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
index 3fb3cfb35346ae28600519f964e038d401fe7175..3843af1371a790656f43bb804370eb5e1b801b23 100644 (file)
--- a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
+++ b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts
@@ -1,87 +1,10 @@
-#include "rtl838x.dtsi"
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "rtl8382_d-link_dgs-1210.dtsi"
 
 / {
        compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
        model = "D-Link DGS-1210-16";
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: power {
-                       label = "green:power";
-                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&gpio0 {
-       indirect-access-bus-id = <0>;
-};
-
-&spi0 {
-       status = "okay";
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x00000000 0x80000>;
-                               read-only;
-                       };
-                       partition@80000 {
-                               label = "u-boot-env";
-                               reg = <0x00080000 0x40000>;
-                               read-only;
-                       };
-                       partition@c0000 {
-                               label = "u-boot-env2";
-                               reg = <0x000c0000 0x40000>;
-                               read-only;
-                       };
-                       partition@280000 {
-                               label = "firmware";
-                               compatible = "denx,uimage";
-                               reg = <0x00100000 0xd80000>;
-                       };
-                       partition@be80000 {
-                               label = "kernel2";
-                               reg = <0x00e80000 0x180000>;
-                       };
-                       partition@1000000 {
-                               label = "sysinfo";
-                               reg = <0x01000000 0x40000>;
-                       };
-                       partition@1040000 {
-                               label = "rootfs2";
-                               reg = <0x01040000 0xc00000>;
-                       };
-                       partition@1c40000 {
-                               label = "jffs2";
-                               reg = <0x01c40000 0x3c0000>;
-                       };
-               };
-       };
 };
 
 &ethernet0 {