-#include "rtl838x.dtsi"
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "rtl8382_d-link_dgs-1210.dtsi"
/ {
compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
model = "D-Link DGS-1210-16";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "dgs-1210-16:green:power";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio0 {
- indirect-access-bus-id = <0>;
-};
-
-&spi0 {
- status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x80000>;
- read-only;
- };
- partition@80000 {
- label = "u-boot-env";
- reg = <0x00080000 0x40000>;
- read-only;
- };
- partition@c0000 {
- label = "u-boot-env2";
- reg = <0x000c0000 0x40000>;
- read-only;
- };
- partition@280000 {
- label = "firmware";
- compatible = "denx,uimage";
- reg = <0x00100000 0xd80000>;
- };
- partition@be80000 {
- label = "kernel2";
- reg = <0x00e80000 0x180000>;
- };
- partition@1000000 {
- label = "sysinfo";
- reg = <0x01000000 0x40000>;
- };
- partition@1040000 {
- label = "rootfs2";
- reg = <0x01040000 0xc00000>;
- };
- partition@1c40000 {
- label = "jffs2";
- reg = <0x01c40000 0x3c0000>;
- };
- };
- };
};
ðernet0 {
regmap = <ðernet0>;
#address-cells = <1>;
#size-cells = <0>;
-
+
/* External phy RTL8218B */
phy0: ethernet-phy@0 {
reg = <0>;
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
};
-
+
/* External phy: RTL8214FC */
phy24: ethernet-phy@24 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-handle = <&phy7>;
phy-mode = "qsgmii";
};
-
port@8 {
reg = <8>;
label = "lan9";