ar71xx: add support for TP-LINK CPE210/220/510/520

This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43385

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 5c1d92f4aa5cfdace19b0274ff55850297a7e994..e39a2b931280ad02403d8c0e942f7043923d2dac 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -43,6 +43,9 @@ get_status_led() {
        cap4200ag)
                status_led="senao:green:pwr"
                ;;
        cap4200ag)
                status_led="senao:green:pwr"
                ;;

+       cpe510)
+               status_led="tp-link:green:link4"
+               ;;

        db120)
                status_led="db120:green:status"
                ;;
        db120)
                status_led="db120:green:status"
                ;;

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 42160713490859bc904c41d1c51407ca159f56eb..c6ecde5946cf7a18477b75d6087a32853ce7ffe9 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -62,6 +62,16 @@ carambola2)
        ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
        ;;
 
        ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
        ;;
 

+cpe510)
+       ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
+       ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+       ucidef_set_rssimon "wlan0" "40000" "1"
+       ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
+       ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
+       ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
+       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
+       ;;
+

 db120)
        ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
        ;;
 db120)
        ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
        ;;

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 872db67d9a6d39c83a2f1c431ed480fb42e333a6..3287e6ce1219e4c9c644b3a1b40e2e239afd7377 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -63,6 +63,13 @@ tl-wdr4900-v2)
        ucidef_add_switch_vlan "switch0" "2" "1 6"
        ;;
 
        ucidef_add_switch_vlan "switch0" "2" "1 6"
        ;;
 

+cpe510)
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0t 5"
+       ucidef_add_switch_vlan "switch0" "2" "0t 4"
+       ;;
+

 db120 |\
 rb-2011l | \
 rb-2011uas |\
 db120 |\
 rb-2011l | \
 rb-2011uas |\

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8dde6ef7072cfe25dfb534451848589cb584fff2..a80225881768f10df95610e5c63f3385809726f5 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -229,6 +229,39 @@ tplink_board_detect() {
        AR71XX_MODEL="$model $hwver"
 }
 
        AR71XX_MODEL="$model $hwver"
 }
 

+tplink_pharos_get_model_string() {
+       local part
+       part=$(find_mtd_part 'product-info')
+       [ -z "$part" ] && return 1
+
+       # The returned string will end with \r\n, but we don't remove it here
+       # to simplify matching against it in the sysupgrade image check
+       dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1
+}
+
+tplink_pharos_board_detect() {
+       local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
+       local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
+       local model
+
+       case "$1" in
+       'CPE210(TP-LINK|UN|N300-2)')
+               model='TP-Link CPE210'
+               ;;
+       'CPE220(TP-LINK|UN|N300-2)')
+               model='TP-Link CPE220'
+               ;;
+       'CPE510(TP-LINK|UN|N300-5)')
+               model='TP-Link CPE510'
+               ;;
+       'CPE520(TP-LINK|UN|N300-5)')
+               model='TP-Link CPE520'
+               ;;
+       esac
+
+       [ -n "$model" ] && AR71XX_MODEL="$model v$2"
+}
+

 ar71xx_board_detect() {
        local machine
        local name
 ar71xx_board_detect() {
        local machine
        local name


@@ -302,6 +335,10 @@ ar71xx_board_detect() {
        *CAP4200AG)
                name="cap4200ag"
                ;;
        *CAP4200AG)
                name="cap4200ag"
                ;;

+       *"CPE210/220/510/520")
+               name="cpe510"
+               tplink_pharos_board_detect
+               ;;

        *"DB120 reference board")
                name="db120"
                ;;
        *"DB120 reference board")
                name="db120"
                ;;


@@ -775,7 +812,8 @@ ar71xx_board_detect() {
                ;;
        esac
 
                ;;
        esac
 

-       [ "${machine:0:8}" = 'TP-LINK ' ] && tplink_board_detect "$machine"
+       [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \
+               tplink_board_detect "$machine"

 
        [ -z "$name" ] && name="unknown"
 
 
        [ -z "$name" ] && name="unknown"
 

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 598b33e79e848993d8c34a46e1598b01c759c3ba..6a85d01df3a6d961e4954463b05c95463c463cc7 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -70,6 +70,33 @@ tplink_get_image_boot_size() {
        get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
 }
 
        get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
 }
 

+tplink_pharos_check_image() {
+       local magic_long="$(get_magic_long "$1")"
+       [ "$magic_long" != "7f454c46" ] && {
+               echo "Invalid image magic '$magic_long'"
+               return 1
+       }
+
+       local model_string="$(tplink_pharos_get_model_string)"
+       local line
+
+       # Here $1 is given to dd directly instead of get_image as otherwise the skip
+       # will take almost a second (as dd can't seek then)
+       #
+       # This will fail if the image isn't local, but that's fine: as the
+       # read loop won't be executed at all, it will return true, so the image
+       # is accepted (loading the first 1.5M of a remote image for this check seems
+       # a bit extreme)
+       dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do
+               [ "$line" == "$model_string" ] && break
+       done || {
+               echo "Unsupported image (model not in support-list)"
+               return 1
+       }
+
+       return 0
+}
+

 seama_get_type_magic() {
        get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
 }
 seama_get_type_magic() {
        get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
 }


@@ -217,6 +244,11 @@ platform_check_image() {
                return 0
                ;;
 
                return 0
                ;;
 

+       cpe510)
+               tplink_pharos_check_image "$1" && return 0
+               return 1
+               ;;
+

        dir-825-b1 | \
        tew-673gru)
                dir825b_check_image "$1" && return 0
        dir-825-b1 | \
        tew-673gru)
                dir825b_check_image "$1" && return 0

diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14
index 6d9be23aa1c97f86290ed8939b116e61c16199ba..e5086afaa44cb60d26d28bcc8ebe35cf3719d0d4 100644 (file)
--- a/target/linux/ar71xx/config-3.14
+++ b/target/linux/ar71xx/config-3.14
@@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_AW_NR580=y
 CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
 CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y

+CONFIG_ATH79_MACH_CPE510=y

 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_DHP_1565_A1=y
 CONFIG_ATH79_MACH_DIR_505_A1=y
 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_DHP_1565_A1=y
 CONFIG_ATH79_MACH_DIR_505_A1=y

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
new file mode 100644 (file)
index 0000000..8bf5c0f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
@@ -0,0 +1,107 @@
+/*
+ *  TP-LINK CPE210/220/510/520 board support
+ *
+ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define CPE510_GPIO_LED_LAN0   11
+#define CPE510_GPIO_LED_LAN1   12
+#define CPE510_GPIO_LED_L1     13
+#define CPE510_GPIO_LED_L2     14
+#define CPE510_GPIO_LED_L3     15
+#define CPE510_GPIO_LED_L4     16
+
+#define CPE510_GPIO_BTN_RESET  4
+
+#define CPE510_KEYS_POLL_INTERVAL      20 /* msecs */
+#define CPE510_KEYS_DEBOUNCE_INTERVAL  (3 * CPE510_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led cpe510_leds_gpio[] __initdata = {
+       {
+               .name           = "tp-link:green:lan0",
+               .gpio           = CPE510_GPIO_LED_LAN0,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:lan1",
+               .gpio           = CPE510_GPIO_LED_LAN1,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link1",
+               .gpio           = CPE510_GPIO_LED_L1,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link2",
+               .gpio           = CPE510_GPIO_LED_L2,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link3",
+               .gpio           = CPE510_GPIO_LED_L3,
+               .active_low     = 1,
+       }, {
+               .name           = "tp-link:green:link4",
+               .gpio           = CPE510_GPIO_LED_L4,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
+       {
+               .desc           = "Reset button",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = CPE510_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
+
+static void __init cpe510_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       /* Disable JTAG, enabling GPIOs 0-3 */
+       /* Configure OBS4 line, for GPIO 4*/
+       ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+                                 AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
+                                cpe510_leds_gpio);
+
+       ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(cpe510_gpio_keys),
+                                       cpe510_gpio_keys);
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_mdio(1, 0);
+       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_register_eth(1);
+
+       ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
+            cpe510_setup);

diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
index 78333be0b5a4ef5e2ec6b4887184e1da15f5c60b..a9d170c7547d961e748beaa8c961e6e3b0fc6f44 100644 (file)
--- a/target/linux/ar71xx/generic/profiles/tp-link.mk
+++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
@@ -16,6 +16,17 @@ endef
 $(eval $(call Profile,ARCHERC7))
 
 
 $(eval $(call Profile,ARCHERC7))
 
 

+define Profile/CPE510
+       NAME:=TP-LINK CPE210/220/510/520
+       PACKAGES:=rssileds
+endef
+
+define Profile/CPE510/Description
+       Package set optimized for the TP-LINK CPE210/220/510/520.
+endef
+$(eval $(call Profile,CPE510))
+
+

 define Profile/TLMR10U
        NAME:=TP-LINK TL-MR10U
        PACKAGES:=kmod-usb-core kmod-usb2
 define Profile/TLMR10U
        NAME:=TP-LINK TL-MR10U
        PACKAGES:=kmod-usb-core kmod-usb2

diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 255713a1621bb2da8aaec0a34bda173534fe9435..1c78898d9d747a108c93f8c27d1c56d964ce8ac6 100644 (file)
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -276,6 +276,7 @@ cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k
 cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
 cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
 cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
 cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
 cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
 cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)

+cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)

 eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
 eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)


@@ -831,6 +832,32 @@ define Image/Build/TPLINK-LZMA/initramfs
 endef
 
 
 endef
 
 

+Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4))
+
+define Image/Build/TPLINK-SAFELOADER
+       -rm -rf $(KDIR)/lzma-loader
+       $(LOADER_MAKE) LOADER=loader-$(2).elf\
+               LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+               LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \
+               compile loader.elf
+
+       -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+               -B $(5) \
+               -k $(KDIR)/loader-$(2).elf \
+               -r $(KDIR)/root.$(1) \
+               -V $(REVISION) \
+               -j \
+               -o $(call factoryname,$(1),$(2))
+       -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+               -B $(5) \
+               -k $(KDIR)/loader-$(2).elf \
+               -r $(KDIR)/root.$(1) \
+               -V $(REVISION) \
+               -j -S \
+               -o $(call sysupname,$(1),$(2))
+endef
+
+

 define Image/Build/CyberTAN
        echo -n '' > $(KDIR_TMP)/empty.bin
        $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
 define Image/Build/CyberTAN
        echo -n '' > $(KDIR_TMP)/empty.bin
        $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \


@@ -1264,6 +1291,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
 

+$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
+

 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
 
 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))

diff --git a/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
index 60df54cf2425f3c62ac42d6ecfe8bb51f45d3eb2..4ce926806b0f3152db68fdeaa27482105674bce9 100644 (file)
--- a/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h

-@@ -16,22 +16,144 @@
+@@ -16,22 +16,145 @@

  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,


@@ -24,6 +24,7 @@
 +      ATH79_MACH_BHU_BXU2000N2_A1,    /* BHU BXU2000n-2 A1 */
 +      ATH79_MACH_CAP4200AG,           /* Senao CAP4200AG */
 +      ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */
 +      ATH79_MACH_BHU_BXU2000N2_A1,    /* BHU BXU2000n-2 A1 */
 +      ATH79_MACH_CAP4200AG,           /* Senao CAP4200AG */
 +      ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */

++      ATH79_MACH_CPE510,              /* TP-LINK CPE510 */

        ATH79_MACH_DB120,               /* Atheros DB120 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 +      ATH79_MACH_DIR_505_A1,          /* D-Link DIR-505 rev. A1 */
        ATH79_MACH_DB120,               /* Atheros DB120 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 +      ATH79_MACH_DIR_505_A1,          /* D-Link DIR-505 rev. A1 */


@@ -209,7 +210,7 @@
  config ATH79_MACH_AP121
        bool "Atheros AP121 reference board"
        select SOC_AR933X
  config ATH79_MACH_AP121
        bool "Atheros AP121 reference board"
        select SOC_AR933X

-@@ -11,62 +66,734 @@ config ATH79_MACH_AP121
+@@ -11,62 +66,743 @@ config ATH79_MACH_AP121

        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC


@@ -698,6 +699,15 @@
 +      select ATH79_DEV_USB
 +      select ATH79_DEV_WMAC
 +
 +      select ATH79_DEV_USB
 +      select ATH79_DEV_WMAC
 +

++config ATH79_MACH_CPE510
++      bool "TP-LINK CPE510 support"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++

 +config ATH79_MACH_TL_MR11U
 +      bool "TP-LINK TL-MR11U/TL-MR3040 support"
 +      select SOC_AR933X
 +config ATH79_MACH_TL_MR11U
 +      bool "TP-LINK TL-MR11U/TL-MR3040 support"
 +      select SOC_AR933X


@@ -972,7 +982,7 @@
  
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM/UniFi boards"
  
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM/UniFi boards"

-@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +819,65 @@ config ATH79_MACH_UBNT_XM

          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  


@@ -1038,7 +1048,7 @@
  endmenu
  
  config SOC_AR71XX
  endmenu
  
  config SOC_AR71XX

-@@ -132,7 +918,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +927,10 @@ config ATH79_DEV_DSA

  config ATH79_DEV_ETH
        def_bool n
  
  config ATH79_DEV_ETH
        def_bool n
  


@@ -1050,7 +1060,7 @@
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS

-@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +962,7 @@ config ATH79_PCI_ATH9K_FIXUP

  config ATH79_ROUTERBOOT
        def_bool n
  
  config ATH79_ROUTERBOOT
        def_bool n
  


@@ -1060,7 +1070,7 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile

-@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)              += route
+@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)              += route

  #
  # Machines
  #
  #
  # Machines
  #


@@ -1079,6 +1089,7 @@
 +obj-$(CONFIG_ATH79_MACH_AW_NR580)     += mach-aw-nr580.o
 +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
 +obj-$(CONFIG_ATH79_MACH_AW_NR580)     += mach-aw-nr580.o
 +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o

++obj-$(CONFIG_ATH79_MACH_CPE510)               += mach-cpe510.o

  obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DIR_505_A1)   += mach-dir-505-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o
  obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DIR_505_A1)   += mach-dir-505-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o