-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "phicomm,psg1218", "ralink,mt7620a-soc";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_blue: blue {
- label = "blue:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- yellow {
- label = "yellow:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "red:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <80000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&state_default {
- gpio {
- groups = "i2c", "uartf";
- function = "gpio";
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};