- remove stray #address-cells / #size-cells
- fix partition unit-addresses in wd-mybooklive.dts
- remove index from MBL's gpio node name
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
reg = <00000003 00000000 00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
reg = <00000003 00000000 00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
- #address-cells = <1>;
- #size-cells = <1>;
status = "disabled";
nand {
status = "disabled";
nand {
status = "okay";
/* 32 MiB NAND Flash */
nand {
status = "okay";
/* 32 MiB NAND Flash */
nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00150000>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00150000>;
ndfc@1,0 {
status = "okay";
nand {
ndfc@1,0 {
status = "okay";
nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
keys {
compatible = "gpio-keys-polled";
keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <60>; /* 3 * 20 = 60ms */
autorepeat;
poll-interval = <60>; /* 3 * 20 = 60ms */
autorepeat;
status = "okay";
/* 32 MiB SLC NAND Flash */
nand {
status = "okay";
/* 32 MiB SLC NAND Flash */
nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
&POB0 {
keys {
compatible = "gpio-keys-polled";
&POB0 {
keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
#interrupt-cells = <2>;
poll-interval = <60>; /* 3 * 20 = 60ms */
autorepeat;
#interrupt-cells = <2>;
poll-interval = <60>; /* 3 * 20 = 60ms */
autorepeat;
status = "okay";
/* 128 MiB Nand Flash */
nand {
status = "okay";
/* 128 MiB Nand Flash */
nand {
- #address-cells = <1>;
- #size-cells = <1>;
-
partition0,0@0 {
label = "NAND 128MiB 3,3V 8-bit";
reg = <0x00000000 0x08000000>;
partition0,0@0 {
label = "NAND 128MiB 3,3V 8-bit";
reg = <0x00000000 0x08000000>;
&POB0 {
keys {
compatible = "gpio-keys-polled";
&POB0 {
keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
#interrupt-cells = <2>;
autorepeat;
poll-interval = <60>; /* 3 * 20 = 60ms */
#interrupt-cells = <2>;
autorepeat;
poll-interval = <60>; /* 3 * 20 = 60ms */
reg = <0x00000000 0x0001e000>;
};
reg = <0x00000000 0x0001e000>;
};
label = "env";
reg = <0x0001e000 0x00002000>;
};
label = "env";
reg = <0x0001e000 0x00002000>;
};
label = "uboot";
reg = <0x00020000 0x00050000>;
};
};
};
label = "uboot";
reg = <0x00020000 0x00050000>;
};
};
};
- GPIO1: gpio1@e0000000 {
compatible = "wd,mbl-gpio", "ti,74273";
reg-names = "dat";
reg = <0xe0000000 0x1>;
compatible = "wd,mbl-gpio", "ti,74273";
reg-names = "dat";
reg = <0xe0000000 0x1>;
- GPIO2: gpio2@e0100000 {
compatible = "wd,mbl-gpio", "ti,74244";
reg-names = "dat";
reg = <0xe0100000 0x1>;
compatible = "wd,mbl-gpio", "ti,74244";
reg-names = "dat";
reg = <0xe0100000 0x1>;
keys {
compatible = "gpio-keys-polled";
keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <60>; /* 3 * 20 = 60ms */
autorepeat;
poll-interval = <60>; /* 3 * 20 = 60ms */
autorepeat;