generic: ar8216: use phydev instead of pdev everywhere
authorGabor Juhos <juhosg@openwrt.org>
Mon, 11 Feb 2013 13:25:43 +0000 (13:25 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 11 Feb 2013 13:25:43 +0000 (13:25 +0000)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35555

target/linux/generic/files/drivers/net/phy/ar8216.c

index a34a749f2a418744f0f7da4d4f62b81f0cb69cd1..7fbc531242d82ca97e7575b48f7eed8794fa6011 100644 (file)
@@ -1841,15 +1841,15 @@ ar8xxx_probe_switch(struct ar8216_priv *priv)
 }
 
 static int
-ar8216_config_init(struct phy_device *pdev)
+ar8216_config_init(struct phy_device *phydev)
 {
-       struct ar8216_priv *priv = pdev->priv;
-       struct net_device *dev = pdev->attached_dev;
+       struct ar8216_priv *priv = phydev->priv;
+       struct net_device *dev = phydev->attached_dev;
        struct switch_dev *swdev;
        int ret;
 
        if (!priv) {
-               priv = ar8xxx_create_mii(pdev->bus);
+               priv = ar8xxx_create_mii(phydev->bus);
                if (priv == NULL)
                        return -ENOMEM;
 
@@ -1858,29 +1858,29 @@ ar8216_config_init(struct phy_device *pdev)
                        goto err_free_priv;
        }
 
-       priv->phy = pdev;
+       priv->phy = phydev;
 
-       if (pdev->addr != 0) {
+       if (phydev->addr != 0) {
                if (chip_is_ar8316(priv)) {
                        /* check if we're attaching to the switch twice */
-                       pdev = pdev->bus->phy_map[0];
-                       if (!pdev) {
+                       phydev = phydev->bus->phy_map[0];
+                       if (!phydev) {
                                ar8xxx_free(priv);
                                return 0;
                        }
 
                        /* switch device has not been initialized, reuse priv */
-                       if (!pdev->priv) {
+                       if (!phydev->priv) {
                                priv->port4_phy = true;
                                priv->dev.ports = (AR8216_NUM_PORTS - 1);
-                               pdev->priv = priv;
+                               phydev->priv = priv;
                                return 0;
                        }
 
                        ar8xxx_free(priv);
 
                        /* switch device has been initialized, reinit */
-                       priv = pdev->priv;
+                       priv = phydev->priv;
                        priv->dev.ports = (AR8216_NUM_PORTS - 1);
                        priv->initialized = false;
                        priv->port4_phy = true;
@@ -1892,15 +1892,15 @@ ar8216_config_init(struct phy_device *pdev)
                return 0;
        }
 
-       pdev->priv = priv;
+       phydev->priv = priv;
 
        swdev = &priv->dev;
-       ret = register_switch(swdev, pdev->attached_dev);
+       ret = register_switch(swdev, phydev->attached_dev);
        if (ret)
                goto err_free_priv;
 
        pr_info("%s: %s switch driver attached.\n",
-               pdev->attached_dev->name, swdev->name);
+               phydev->attached_dev->name, swdev->name);
 
        priv->init = true;
 
@@ -1930,7 +1930,7 @@ err_unregister_switch:
        unregister_switch(&priv->dev);
 err_free_priv:
        ar8xxx_free(priv);
-       pdev->priv = NULL;
+       phydev->priv = NULL;
        return ret;
 }
 
@@ -2024,40 +2024,40 @@ ar8xxx_is_possible(struct mii_bus *bus)
 }
 
 static int
-ar8216_probe(struct phy_device *pdev)
+ar8216_probe(struct phy_device *phydev)
 {
        struct ar8216_priv *priv;
        int ret;
 
        /* skip PHYs at unused adresses */
-       if (pdev->addr != 0 && pdev->addr != 4)
+       if (phydev->addr != 0 && phydev->addr != 4)
                return -ENODEV;
 
-       if (!ar8xxx_is_possible(pdev->bus))
+       if (!ar8xxx_is_possible(phydev->bus))
                return -ENODEV;
 
-       priv = ar8xxx_create_mii(pdev->bus);
+       priv = ar8xxx_create_mii(phydev->bus);
        if (priv == NULL)
                return -ENOMEM;
 
-       priv->phy = pdev;
+       priv->phy = phydev;
 
        ret = ar8xxx_probe_switch(priv);
        if (ret)
                goto out;
 
-       if (pdev->addr == 0) {
+       if (phydev->addr == 0) {
                if (ar8xxx_has_gige(priv)) {
-                       pdev->supported = SUPPORTED_1000baseT_Full;
-                       pdev->advertising = ADVERTISED_1000baseT_Full;
+                       phydev->supported = SUPPORTED_1000baseT_Full;
+                       phydev->advertising = ADVERTISED_1000baseT_Full;
                } else {
-                       pdev->supported = SUPPORTED_100baseT_Full;
-                       pdev->advertising = ADVERTISED_100baseT_Full;
+                       phydev->supported = SUPPORTED_100baseT_Full;
+                       phydev->advertising = ADVERTISED_100baseT_Full;
                }
        } else {
                if (ar8xxx_has_gige(priv)) {
-                       pdev->supported |= SUPPORTED_1000baseT_Full;
-                       pdev->advertising |= ADVERTISED_1000baseT_Full;
+                       phydev->supported |= SUPPORTED_1000baseT_Full;
+                       phydev->advertising |= ADVERTISED_1000baseT_Full;
                }
        }
 
@@ -2069,9 +2069,9 @@ out:
 }
 
 static void
-ar8216_detach(struct phy_device *pdev)
+ar8216_detach(struct phy_device *phydev)
 {
-       struct net_device *dev = pdev->attached_dev;
+       struct net_device *dev = phydev->attached_dev;
 
        if (!dev)
                return;
@@ -2083,16 +2083,16 @@ ar8216_detach(struct phy_device *pdev)
 }
 
 static void
-ar8216_remove(struct phy_device *pdev)
+ar8216_remove(struct phy_device *phydev)
 {
-       struct ar8216_priv *priv = pdev->priv;
+       struct ar8216_priv *priv = phydev->priv;
 
        if (!priv)
                return;
 
-       pdev->priv = NULL;
+       phydev->priv = NULL;
 
-       if (pdev->addr == 0)
+       if (phydev->addr == 0)
                unregister_switch(&priv->dev);
 
        ar8xxx_mib_stop(priv);