add vdsl userland app
authorJohn Crispin <john@openwrt.org>
Thu, 14 Mar 2013 18:43:13 +0000 (18:43 +0000)
committerJohn Crispin <john@openwrt.org>
Thu, 14 Mar 2013 18:43:13 +0000 (18:43 +0000)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36022

package/platform/lantiq/ltq-vdsl-app/Makefile [new file with mode: 0644]
package/platform/lantiq/ltq-vdsl-app/files/dsl_control [new file with mode: 0644]
package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh [new file with mode: 0644]
package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch [new file with mode: 0644]

diff --git a/package/platform/lantiq/ltq-vdsl-app/Makefile b/package/platform/lantiq/ltq-vdsl-app/Makefile
new file mode 100644 (file)
index 0000000..3de29d5
--- /dev/null
@@ -0,0 +1,75 @@
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ltq-vdsl-app
+PKG_VERSION:=4.11.4
+PKG_RELEASE:=1
+PKG_BASE_NAME:=dsl_cpe_control_vrx
+PKG_SOURCE:=$(PKG_BASE_NAME)-$(PKG_VERSION).tar.gz
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/dsl_cpe_control-$(PKG_VERSION)
+
+PKG_BUILD_DEPENDS:=kmod-ltq-vdsl-vr9
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ltq-vdsl-app
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Lantiq VDSL userland tool
+  URL:=http://www.lantiq.com/
+  DEPENDS:=@TARGET_lantiq_xway +libpthread
+endef
+
+define Package/ltq-vdsl-app/description
+  Userland tool needed to control Lantiq VDSL CPE
+endef
+
+CONFIGURE_ARGS += \
+       --with-max-device="1" \
+       --with-lines-per-device="1" \
+       --with-channels-per-line="1" \
+       --enable-vrx \
+       --enable-driver-include="-I$(STAGING_DIR)/usr/include/drv_vdsl_cpe_api" \
+       --enable-device-driver-include="-I$(STAGING_DIR)/usr/include/vdsl/" \
+       --enable-add-appl-cflags="-DMAX_CLI_PIPES=2" \
+       --enable-ifxos \
+       --enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
+       --enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
+       --enable-dsl-ceoc \
+       --enable-dsl-pm-total \
+       --enable-dsl-pm-showtime \
+       --enable-dsl-pm-line-counters \
+       --enable-dsl-pm-line-failure-counters \
+       --enable-dsl-pm-datapath-counters \
+       --enable-dsl-pm-datapath-failure-counters \
+       --enable-deprecated \
+       --disable-soap-support \
+       --enable-dsl-bonding=no \
+       --disable-dti
+
+ifeq ($(CONFIG_IFX_CLI),y)
+CONFIGURE_ARGS += \
+       --enable-cli-support
+endif
+
+CONFIGURE_ARGS += --enable-model=full
+#CONFIGURE_ARGS += --enable-model=lite
+#CONFIGURE_ARGS += --enable-model=footprint
+#CONFIGURE_ARGS += --enable-model=typical
+#CONFIGURE_ARGS += --enable-model=debug
+
+define Package/ltq-vdsl-app/install
+       $(INSTALL_DIR) $(1)/etc/init.d
+       $(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/
+
+       $(INSTALL_DIR) $(1)/sbin
+       $(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control
+       $(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin
+endef
+
+$(eval $(call BuildPackage,ltq-vdsl-app))
diff --git a/package/platform/lantiq/ltq-vdsl-app/files/dsl_control b/package/platform/lantiq/ltq-vdsl-app/files/dsl_control
new file mode 100644 (file)
index 0000000..0d7d32c
--- /dev/null
@@ -0,0 +1,311 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012 OpenWrt.org
+
+START=99
+
+EXTRA_COMMANDS="status lucistat"
+EXTRA_HELP="   status  Get DSL status information
+       lucistat  Get status information if lua friendly format"
+
+SERVICE_DAEMONIZE=1
+SERVICE_WRITE_PID=1
+
+#
+# Basic functions to send CLI commands to the vdsl_cpe_control daemon
+#
+dsl_cmd() {
+       killall -0 vdsl_cpe_control && (
+               echo "$@" > /tmp/pipe/dsl_cpe0_cmd
+               cat /tmp/pipe/dsl_cpe0_ack
+       )
+}
+dsl_val() {
+       echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
+}
+
+#
+# Simple divide by 10 routine to cope with one decimal place
+#
+dbt() {
+       local a=$(expr $1 / 10)
+       local b=$(expr $1 % 10)
+       echo "${a}.${b}"
+}
+#
+# Take a number and convert to k or meg
+#
+scale() {
+       local val=$1
+       local a
+       local b
+
+       if [ "$val" -gt 1000000 ]; then
+               a=$(expr $val / 1000)
+               b=$(expr $a % 1000)
+               a=$(expr $a / 1000)
+               printf "%d.%03d Mb" ${a} ${b}
+       elif [ "$val" -gt 1000 ]; then
+               a=$(expr $val / 1000)
+               printf "%d Kb" ${a}
+       else
+               echo "${val} b"
+       fi
+}
+
+#
+# Read the data rates for both directions
+#
+data_rates() {
+       local csg
+       local dru
+       local drd
+       local sdru
+       local sdrd
+
+       csg=$(dsl_cmd g997csg 0 1)
+       drd=$(dsl_val "$csg" ActualDataRate)
+
+       csg=$(dsl_cmd g997csg 0 0)
+       dru=$(dsl_val "$csg" ActualDataRate)
+
+       [ -z "$drd" ] && drd=0
+       [ -z "$dru" ] && dru=0
+
+       sdrd=$(scale $drd)
+       sdru=$(scale $dru)
+
+       if [ "$action" = "lucistat" ]; then
+               echo "dsl.data_rate_down=$drd"
+               echo "dsl.data_rate_up=$dru"
+               echo "dsl.data_rate_down_s=\"$sdrd\""
+               echo "dsl.data_rate_up_s=\"$sdru\""
+       else
+               echo "Data Rate:                ${sdrd}/s / ${sdru}/s"
+       fi
+}
+
+#
+# Chipset
+#
+chipset() {
+       local vig
+       local cs
+       local csv
+
+       vig=$(dsl_cmd vig)
+       cs=$(dsl_val "$vig" DSL_ChipSetType)
+       csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
+
+       if [ "$action" = "lucistat" ]; then
+               echo "dsl.chipset=\"${cs} ${csv}\""
+       else
+               echo "Chipset:          ${cs} ${csv}"
+       fi
+}
+
+#
+# Work out how long the line has been up
+#
+line_uptime() {
+       local ccsg
+       local et
+       local etr
+       local d
+       local h
+       local m
+       local s
+       local rc=""
+
+       ccsg=$(dsl_cmd pmccsg 0 0 0)
+       et=$(dsl_val "$ccsg" nElapsedTime)
+
+       [ -z "$et" ] && et=0
+
+       if [ "$action" = "lucistat" ]; then
+               echo "dsl.line_uptime=${et}"
+               return
+       fi
+
+       d=$(expr $et / 86400)
+       etr=$(expr $et % 86400)
+       h=$(expr $etr / 3600)
+       etr=$(expr $etr % 3600)
+       m=$(expr $etr / 60)
+       s=$(expr $etr % 60)
+
+
+       [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
+       [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
+       [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
+       [ "${d}" -ne 0 ] && rc="${d}d ${rc}"
+
+       [ -z "$rc" ] && rc="down"
+       echo "Line Uptime:              ${rc}"
+}
+
+#
+# Get noise and attenuation figures
+#
+line_data() {
+       local lsg
+       local latnu
+       local latnd
+       local snru
+       local snrd
+
+       lsg=$(dsl_cmd g997lsg 1 1)
+       latnd=$(dsl_val "$lsg" LATN)
+       snrd=$(dsl_val "$lsg" SNR)
+
+       lsg=$(dsl_cmd g997lsg 0 1)
+       latnu=$(dsl_val "$lsg" LATN)
+       snru=$(dsl_val "$lsg" SNR)
+
+       [ -z "$latnd" ] && latnd=0
+       [ -z "$latnu" ] && latnu=0
+       [ -z "$snrd" ] && snrd=0
+       [ -z "$snru" ] && snru=0
+
+       latnd=$(dbt $latnd)
+       latnu=$(dbt $latnu)
+       snrd=$(dbt $snrd)
+       snru=$(dbt $snru)
+       
+       if [ "$action" = "lucistat" ]; then
+               echo "dsl.line_attenuation_down=$latnd"
+               echo "dsl.line_attenuation_up=$latnu"
+               echo "dsl.noise_margin_down=$snrd"
+               echo "dsl.noise_margin_up=$snru"
+       else
+               echo "Line Attenuation: ${latnd}dB / ${latnu}dB"
+               echo "Noise Margin:             ${snrd}dB / ${snru}dB"
+       fi
+}
+
+#
+# Is the line up? Or what state is it in?
+#
+line_state() {
+       local lsg=$(dsl_cmd lsg)
+       local ls=$(dsl_val "$lsg" nLineState);
+       local s;
+
+       case "$ls" in
+               "0x0")          s="not initialized" ;;
+               "0x1")          s="exception" ;;
+               "0x10")         s="not updated" ;;
+               "0xff")         s="idle request" ;;
+               "0x100")        s="idle" ;;
+               "0x1ff")        s="silent request" ;;
+               "0x200")        s="silent" ;;
+               "0x300")        s="handshake" ;;
+               "0x380")        s="full_init" ;;
+               "0x400")        s="discovery" ;;
+               "0x500")        s="training" ;;
+               "0x600")        s="analysis" ;;
+               "0x700")        s="exchange" ;;
+               "0x800")        s="showtime_no_sync" ;;
+               "0x801")        s="showtime_tc_sync" ;;
+               "0x900")        s="fastretrain" ;;
+               "0xa00")        s="lowpower_l2" ;;
+               "0xb00")        s="loopdiagnostic active" ;;
+               "0xb10")        s="loopdiagnostic data exchange" ;;
+               "0xb20")        s="loopdiagnostic data request" ;;
+               "0xc00")        s="loopdiagnostic complete" ;;
+               "0x1000000")    s="test" ;;
+               "0xd00")        s="resync" ;;
+               "0x3c0")        s="short init entry" ;;
+               "")             s="not running daemon"; ls="0xfff" ;;
+               *)              s="unknown" ;;
+       esac
+
+       if [ $action = "lucistat" ]; then
+               echo "dsl.line_state_num=$ls"
+               echo "dsl.line_state_detail=\"$s\""
+               if [ "$ls" = "0x801" ]; then
+                       echo "dsl.line_state=\"UP\""
+               else
+                       echo "dsl.line_state=\"DOWN\""
+               fi
+       else
+               if [ "$ls" = "0x801" ]; then
+                       echo "Line State:               UP [$ls: $s]"
+               else
+                       echo "Line State:               DOWN [$ls: $s]"
+               fi
+       fi
+}
+
+#
+# Main status routine
+#
+status() {
+       chipset
+       line_state
+       data_rates
+       line_data
+       line_uptime
+}
+
+#
+# Luci (lua) compatible version that's easy to parse
+#
+lucistat() {
+       echo "local dsl={}"
+       status
+       echo "return dsl"
+}
+
+
+annex_b=10_00_10_00_00_04_00_00
+annex_bdmt=10_00_00_00_00_00_00_00
+annex_b2=00_00_10_00_00_00_00_00
+annex_b2p=00_00_00_00_00_04_00_00
+annex_a=04_01_04_00_00_01_00_00
+annex_at1=01_00_00_00_00_00_00_00
+annex_alite=00_01_00_00_00_00_00_00
+annex_admt=04_00_00_00_00_00_00_00
+annex_a2=00_00_04_00_00_00_00_00
+annex_a2p=00_00_00_00_00_01_00_00
+annex_l=00_00_00_00_04_00_00_00
+annex_m=00_00_00_00_40_00_04_00
+annex_m2=00_00_00_00_40_00_00_00
+annex_m2p=00_00_00_00_00_00_04_00
+
+#
+# Simple start routine
+#
+start() {
+       local annex
+       local firmware
+       local xtu
+       config_load network
+       config_get annex wan annex
+       config_get firmware wan firmware
+
+       # get xtu
+       eval "xtu=\"\${annex_$annex}\""
+
+       # check for firmware
+       [ -z "${firmware}" ] &&
+               firmware=vdsl.bin
+
+       # start CPE dsl daemon in the background
+       service_start /sbin/vdsl_cpe_control -i${xtu} \
+                       -n /sbin/dsl_notify.sh \
+                       -f /lib/firmware/${firmware}
+}
+
+#
+# For stop we want to simulate the notification call for when
+# the line goes down, so that we can stop the ppp link before
+# we die.
+#
+stop() {
+       DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
+       DSL_INTERFACE_STATUS="DOWN" \
+               /sbin/dsl_notify.sh
+
+       service_stop /sbin/vdsl_cpe_control
+}
+
diff --git a/package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh b/package/platform/lantiq/ltq-vdsl-app/files/dsl_notify.sh
new file mode 100644 (file)
index 0000000..5e9f396
--- /dev/null
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# This script is called by dsl_cpe_control whenever there is a DSL event,
+# we only actually care about the DSL_INTERFACE_STATUS events as these
+# tell us the line has either come up or gone down.
+#
+# The rest of the code is basically the same at the atm hotplug code
+#
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /lib/functions.sh
+
+include /lib/network
+scan_interfaces
+
+local found=0
+local ifc
+for ifc in $interfaces; do
+       local up
+       config_get_bool up "$ifc" up 0
+
+       local auto
+       config_get_bool auto "$ifc" auto 1
+
+       local proto
+       config_get proto "$ifc" proto
+
+       if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
+               if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then
+                       found=1
+                       ( sleep 1; ifup "$ifc" ) &
+               fi
+       else
+               if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then
+                       found=1
+                       ( sleep 1; ifdown "$ifc" ) &
+               fi
+       fi
+done
+
+if [ "$found" != 1 ]; then
+       logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)"
+fi
diff --git a/package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch b/package/platform/lantiq/ltq-vdsl-app/patches/100-compat.patch
new file mode 100644 (file)
index 0000000..da56232
--- /dev/null
@@ -0,0 +1,26 @@
+Index: dsl_cpe_control-4.11.4/src/dsl_cpe_init_cfg.c
+===================================================================
+--- dsl_cpe_control-4.11.4.orig/src/dsl_cpe_init_cfg.c 2011-10-26 00:35:26.000000000 +0200
++++ dsl_cpe_control-4.11.4/src/dsl_cpe_init_cfg.c      2012-11-28 15:53:10.857692092 +0100
+@@ -43,7 +43,7 @@
+    {
+    DSL_CPE_LL_CFG_SET(-1, -1, DSL_DEV_HS_TONE_GROUP_VDSL2_B43, \
+       DSL_DEV_HS_TONE_GROUP_VDSL2_B43, DSL_DEV_HS_TONE_GROUP_VDSL2_B43, \
+-      0x1E116000, 0x37, -1),
++      0x1E116000, 0x3f, -1),
+ #endif
+ #if defined(INCLUDE_DSL_CPE_API_VINAX)
+Index: dsl_cpe_control-4.11.4/src/dsl_cpe_control.c
+===================================================================
+--- dsl_cpe_control-4.11.4.orig/src/dsl_cpe_control.c  2012-01-13 15:15:34.000000000 +0100
++++ dsl_cpe_control-4.11.4/src/dsl_cpe_control.c       2012-11-28 15:53:23.465692408 +0100
+@@ -6432,7 +6432,7 @@
+    for (nDevice = 0; nDevice < DSL_CPE_MAX_DEVICE_NUMBER; nDevice++)
+    {
+ #if defined(INCLUDE_DSL_CPE_API_VINAX) || defined(INCLUDE_DSL_CPE_API_VRX)
+-      sprintf (device, "%s/%d", DSL_CPE_DEVICE_NAME, nDevice);
++      sprintf (device, "%s%d", DSL_CPE_DEVICE_NAME, nDevice);
+ #else
+       sprintf (device, "%s", DSL_CPE_DEVICE_NAME);
+ #endif /* defined(INCLUDE_DSL_CPE_API_VINAX) || defined(INCLUDE_DSL_CPE_API_VRX)*/