mvebu: backport Turris Omnia DTS changes to 5.4
authorKlaus Kudielka <klaus.kudielka@gmail.com>
Sat, 17 Jul 2021 17:32:57 +0000 (19:32 +0200)
committerChristian Lamparter <chunkeey@gmail.com>
Wed, 29 Dec 2021 20:18:52 +0000 (21:18 +0100)
Kernel 5.4 receives a reduced set, just to make the SFP cage work.
While we are at it, move the patches accepted upstream to the 0xx series.

Reviewed-by: Noci <noci@noci.work>
Reviewed-by: Justin van Steijn <jvs@fsfe.org>
Reviewed-by: Nico Rikken <nico@nicorikken.eu>
Reviewed-by: Julius Schwartzenberg <julius.schwartzenberg@gmail.com>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
(cherry picked from commit 8138cb8737d1475e6e8d57393500f30384e75a82)

target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch [new file with mode: 0644]
target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch [new file with mode: 0644]
target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch [new file with mode: 0644]
target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch [new file with mode: 0644]
target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch [new file with mode: 0644]
target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch [new file with mode: 0644]
target/linux/mvebu/patches-5.4/317-ARM-dts-turris-omnia-enable-HW-buffer-management.patch [deleted file]
target/linux/mvebu/patches-5.4/318-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch [deleted file]

diff --git a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch b/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
new file mode 100644 (file)
index 0000000..7a4b511
--- /dev/null
@@ -0,0 +1,74 @@
+From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
+Date: Sun, 15 Nov 2020 14:59:17 +0100
+Subject: ARM: dts: turris-omnia: enable HW buffer management
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The buffer manager is available on Turris Omnia but needs to be
+described in device-tree to be used.
+
+Signed-off-by: Marek Behún <kabel@kernel.org>
+Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
+Cc: Jason Cooper <jason@lakedaemon.net>
+Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
+Cc: Andreas Färber <afaerber@suse.de>
+Cc: Andrew Lunn <andrew@lunn.ch>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
+
+--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
+@@ -84,12 +84,23 @@
+       };
+ };
++&bm {
++      status = "okay";
++};
++
++&bm_bppi {
++      status = "okay";
++};
++
+ /* Connected to 88E6176 switch, port 6 */
+ &eth0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ge0_rgmii_pins>;
+       status = "okay";
+       phy-mode = "rgmii";
++      buffer-manager = <&bm>;
++      bm,pool-long = <0>;
++      bm,pool-short = <3>;
+       fixed-link {
+               speed = <1000>;
+@@ -103,6 +114,9 @@
+       pinctrl-0 = <&ge1_rgmii_pins>;
+       status = "okay";
+       phy-mode = "rgmii";
++      buffer-manager = <&bm>;
++      bm,pool-long = <1>;
++      bm,pool-short = <3>;
+       fixed-link {
+               speed = <1000>;
+@@ -115,6 +129,9 @@
+       status = "okay";
+       phy-mode = "sgmii";
+       phy = <&phy1>;
++      buffer-manager = <&bm>;
++      bm,pool-long = <2>;
++      bm,pool-short = <3>;
+ };
+ &i2c0 {
diff --git a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch b/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
new file mode 100644 (file)
index 0000000..99ed07e
--- /dev/null
@@ -0,0 +1,37 @@
+From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
+Date: Sun, 15 Nov 2020 14:59:18 +0100
+Subject: ARM: dts: turris-omnia: add comphy handle to eth2
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
+be able to switch between 1G and 2.5G modes the comphy link has to be
+defined.
+
+Signed-off-by: Marek Behún <kabel@kernel.org>
+Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...")
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Andreas Färber <afaerber@suse.de>
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
+Cc: Jason Cooper <jason@lakedaemon.net>
+Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
+@@ -129,6 +129,7 @@
+       status = "okay";
+       phy-mode = "sgmii";
+       phy = <&phy1>;
++      phys = <&comphy5 2>;
+       buffer-manager = <&bm>;
+       bm,pool-long = <2>;
+       bm,pool-short = <3>;
diff --git a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch b/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
new file mode 100644 (file)
index 0000000..4bbd80a
--- /dev/null
@@ -0,0 +1,61 @@
+From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
+Date: Sun, 15 Nov 2020 14:59:19 +0100
+Subject: ARM: dts: turris-omnia: describe switch interrupt
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Describe switch interrupt for Turris Omnia so that the CPU does not have
+to poll the switch. We also need to to set mpp45 pin to gpio function
+for this.
+
+Signed-off-by: Marek Behún <kabel@kernel.org>
+Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
+Cc: Jason Cooper <jason@lakedaemon.net>
+Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
+Cc: Andreas Färber <afaerber@suse.de>
+Cc: Andrew Lunn <andrew@lunn.ch>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
+ 1 file changed, 11 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
+@@ -261,13 +261,18 @@
+       /* Switch MV88E6176 at address 0x10 */
+       switch@10 {
++              pinctrl-names = "default";
++              pinctrl-0 = <&swint_pins>;
+               compatible = "marvell,mv88e6085";
+               #address-cells = <1>;
+               #size-cells = <0>;
+-              dsa,member = <0 0>;
++              dsa,member = <0 0>;
+               reg = <0x10>;
++              interrupt-parent = <&gpio1>;
++              interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
++
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+@@ -320,6 +325,11 @@
+               marvell,function = "gpio";
+       };
++      swint_pins: swint-pins {
++              marvell,pins = "mpp45";
++              marvell,function = "gpio";
++      };
++
+       spi0cs0_pins: spi0cs0-pins {
+               marvell,pins = "mpp25";
+               marvell,function = "spi0";
diff --git a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch b/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
new file mode 100644 (file)
index 0000000..2447a4e
--- /dev/null
@@ -0,0 +1,90 @@
+From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
+Date: Mon, 16 Nov 2020 13:24:22 +0100
+Subject: ARM: dts: turris-omnia: add SFP node
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Turris Omnia has an SFP cage that, together with WAN PHY, is connected
+to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
+the multiplexor switches the SerDes signal from PHY to SFP.
+
+Describe the SFP cage, but leave it disabled. Until phylink has support
+for such configuration, we are leaving it to U-Boot to enable SFP and
+disable WAN PHY at boot time depending on whether a SFP module is
+present.
+
+Signed-off-by: Marek Behún <kabel@kernel.org>
+Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
+Cc: Jason Cooper <jason@lakedaemon.net>
+Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
+Cc: Andreas Färber <afaerber@suse.de>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ arch/arm/boot/dts/armada-385-turris-omnia.dts | 30 ++++++++++++++++++++++++++-
+ 1 file changed, 29 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
+@@ -82,6 +82,24 @@
+                       };
+               };
+       };
++
++      sfp: sfp {
++              compatible = "sff,sfp";
++              i2c-bus = <&sfp_i2c>;
++              tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
++              tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
++              rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
++              los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
++              mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
++              maximum-power-milliwatt = <3000>;
++
++              /*
++               * For now this has to be enabled at boot time by U-Boot when
++               * a SFP module is present. Read more in the comment in the
++               * eth2 node below.
++               */
++              status = "disabled";
++      };
+ };
+ &bm {
+@@ -126,10 +144,20 @@
+ /* WAN port */
+ &eth2 {
++      /*
++       * eth2 is connected via a multiplexor to both the SFP cage and to
++       * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
++       * a SFP module is present, as determined by the mode-def0 GPIO.
++       *
++       * Until kernel supports this configuration properly, in case SFP module
++       * is present, U-Boot has to enable the sfp node above, remove phy
++       * handle and add managed = "in-band-status" property.
++       */
+       status = "okay";
+       phy-mode = "sgmii";
+       phy = <&phy1>;
+       phys = <&comphy5 2>;
++      sfp = <&sfp>;
+       buffer-manager = <&bm>;
+       bm,pool-long = <2>;
+       bm,pool-short = <3>;
+@@ -195,7 +223,7 @@
+                       /* routed to PCIe2 connector (CN62A) */
+               };
+-              i2c@4 {
++              sfp_i2c: i2c@4 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <4>;
diff --git a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch b/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
new file mode 100644 (file)
index 0000000..5ceef5d
--- /dev/null
@@ -0,0 +1,52 @@
+From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
+Date: Sun, 15 Nov 2020 14:59:22 +0100
+Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Use property name `phy-handle` instead of the deprecated `phy` to
+connect eth2 to the PHY.
+Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is
+incorrect according to device-tree bindings documentation.
+Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
+needed. Kernel can read the PHY identifier itself.
+
+Signed-off-by: Marek Behún <kabel@kernel.org>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Cc: linux-arm-kernel@lists.infradead.org
+Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
+Cc: Jason Cooper <jason@lakedaemon.net>
+Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
+Cc: Andreas Färber <afaerber@suse.de>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
+@@ -155,7 +155,7 @@
+        */
+       status = "okay";
+       phy-mode = "sgmii";
+-      phy = <&phy1>;
++      phy-handle = <&phy1>;
+       phys = <&comphy5 2>;
+       sfp = <&sfp>;
+       buffer-manager = <&bm>;
+@@ -278,9 +278,9 @@
+       pinctrl-0 = <&mdio_pins>;
+       status = "okay";
+-      phy1: phy@1 {
++      phy1: ethernet-phy@1 {
+               status = "okay";
+-              compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
++              compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+               marvell,reg-init = <3 18 0 0x4985>;
diff --git a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch b/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
new file mode 100644 (file)
index 0000000..4283a61
--- /dev/null
@@ -0,0 +1,33 @@
+From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00 2001
+From: Rui Salvaterra <rsalvaterra@gmail.com>
+Date: Wed, 17 Feb 2021 15:30:38 +0000
+Subject: ARM: dts: turris-omnia: fix hardware buffer management
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Hardware buffer management has never worked on the Turris Omnia, as the
+required MBus window hadn't been reserved. Fix thusly.
+
+Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
+
+Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
+Reviewed-by: Marek Behún <kabel@kernel.org>
+Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
++++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
+@@ -31,7 +31,8 @@
+               ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+                         MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+                         MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+-                        MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++                        MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
++                        MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+               internal-regs {
diff --git a/target/linux/mvebu/patches-5.4/317-ARM-dts-turris-omnia-enable-HW-buffer-management.patch b/target/linux/mvebu/patches-5.4/317-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
deleted file mode 100644 (file)
index 7a4b511..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Sun, 15 Nov 2020 14:59:17 +0100
-Subject: ARM: dts: turris-omnia: enable HW buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The buffer manager is available on Turris Omnia but needs to be
-described in device-tree to be used.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
-Cc: Andreas Färber <afaerber@suse.de>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
-(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -84,12 +84,23 @@
-       };
- };
-+&bm {
-+      status = "okay";
-+};
-+
-+&bm_bppi {
-+      status = "okay";
-+};
-+
- /* Connected to 88E6176 switch, port 6 */
- &eth0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&ge0_rgmii_pins>;
-       status = "okay";
-       phy-mode = "rgmii";
-+      buffer-manager = <&bm>;
-+      bm,pool-long = <0>;
-+      bm,pool-short = <3>;
-       fixed-link {
-               speed = <1000>;
-@@ -103,6 +114,9 @@
-       pinctrl-0 = <&ge1_rgmii_pins>;
-       status = "okay";
-       phy-mode = "rgmii";
-+      buffer-manager = <&bm>;
-+      bm,pool-long = <1>;
-+      bm,pool-short = <3>;
-       fixed-link {
-               speed = <1000>;
-@@ -115,6 +129,9 @@
-       status = "okay";
-       phy-mode = "sgmii";
-       phy = <&phy1>;
-+      buffer-manager = <&bm>;
-+      bm,pool-long = <2>;
-+      bm,pool-short = <3>;
- };
- &i2c0 {
diff --git a/target/linux/mvebu/patches-5.4/318-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch b/target/linux/mvebu/patches-5.4/318-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
deleted file mode 100644 (file)
index a3f41fb..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-From 9704292ed3230ee19dc4dd64f7484301b728ffb7 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Wed, 17 Feb 2021 15:19:30 +0000
-Subject: [PATCH] ARM: dts: turris-omnia: fix hardware buffer management
-
-Hardware buffer management has never worked on the Turris Omnia, as the
-required MBus window hadn't been reserved. Fix thusly.
-
-Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -31,7 +31,8 @@
-               ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-                         MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-                         MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
--                        MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-+                        MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-+                        MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-               internal-regs {