+++ /dev/null
-From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 27 Aug 2019 15:16:56 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
-
-Adds support for AQR112 and AQR412 which is mostly based on existing code
-with the addition of code configuring the protocol on system side.
-This allows changing the system side protocol without having to deploy a
-different firmware on the PHY.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -20,9 +20,11 @@
- #define PHY_ID_AQR105 0x03a1b4a2
- #define PHY_ID_AQR106 0x03a1b4d0
- #define PHY_ID_AQR107 0x03a1b4e0
-+#define PHY_ID_AQR112 0x03a1b662
- #define PHY_ID_AQR113C 0x31c31c12
- #define PHY_ID_AQCS109 0x03a1b5c2
- #define PHY_ID_AQR405 0x03a1b4b0
-+#define PHY_ID_AQR412 0x03a1b712
- #define PHY_ID_AQR813 0x31c31cb2
-
- #define MDIO_PHYXS_VEND_IF_STATUS 0xe812
-@@ -123,6 +125,29 @@
- #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1)
- #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0)
-
-+/* registers in MDIO_MMD_VEND1 region */
-+#define AQUANTIA_VND1_GLOBAL_SC 0x000
-+#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb)
-+
-+/* global start rate, the protocol associated with this speed is used by default
-+ * on SI.
-+ */
-+#define AQUANTIA_VND1_GSTART_RATE 0x31a
-+#define AQUANTIA_VND1_GSTART_RATE_OFF 0
-+#define AQUANTIA_VND1_GSTART_RATE_100M 1
-+#define AQUANTIA_VND1_GSTART_RATE_1G 2
-+#define AQUANTIA_VND1_GSTART_RATE_10G 3
-+#define AQUANTIA_VND1_GSTART_RATE_2_5G 4
-+#define AQUANTIA_VND1_GSTART_RATE_5G 5
-+
-+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
-+#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b
-+#define AQUANTIA_VND1_GSYSCFG_100M 0
-+#define AQUANTIA_VND1_GSYSCFG_1G 1
-+#define AQUANTIA_VND1_GSYSCFG_2_5G 2
-+#define AQUANTIA_VND1_GSYSCFG_5G 3
-+#define AQUANTIA_VND1_GSYSCFG_10G 4
-+
- struct aqr107_hw_stat {
- const char *name;
- int reg;
-@@ -243,6 +268,51 @@ static int aqr_config_aneg(struct phy_de
- return genphy_c45_check_and_restart_aneg(phydev, changed);
- }
-
-+static struct {
-+ u16 syscfg;
-+ int cnt;
-+ u16 start_rate;
-+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
-+ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
-+ AQUANTIA_VND1_GSTART_RATE_1G},
-+ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
-+ AQUANTIA_VND1_GSTART_RATE_2_5G},
-+ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G,
-+ AQUANTIA_VND1_GSTART_RATE_10G},
-+ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G,
-+ AQUANTIA_VND1_GSTART_RATE_10G},
-+};
-+
-+/* Sets up protocol on system side before calling aqr_config_aneg */
-+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
-+{
-+ int if_type = phydev->interface;
-+ int i;
-+
-+ if (!aquantia_syscfg[if_type].cnt)
-+ return 0;
-+
-+ /* set PHY in low power mode so we can configure protocols */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
-+ AQUANTIA_VND1_GLOBAL_SC_LP);
-+ mdelay(10);
-+
-+ /* set the default rate to enable the SI link */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
-+ aquantia_syscfg[if_type].start_rate);
-+
-+ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+ AQUANTIA_VND1_GSYSCFG_BASE + i,
-+ aquantia_syscfg[if_type].syscfg);
-+
-+ /* wake PHY back up */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
-+ mdelay(10);
-+
-+ return aqr_config_aneg(phydev);
-+}
-+
- static int aqr_config_intr(struct phy_device *phydev)
- {
- bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
-@@ -738,6 +808,22 @@ static struct phy_driver aqr_driver[] =
- .get_stats = aqr107_get_stats,
- .link_change_notify = aqr107_link_change_notify,
- },
-+{
-+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
-+ .name = "Aquantia AQR112",
-+ .config_aneg = aqr_config_aneg_set_prot,
-+ .config_intr = aqr_config_intr,
-+ .ack_interrupt = aqr_ack_interrupt,
-+ .read_status = aqr107_read_status,
-+},
-+{
-+ PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
-+ .name = "Aquantia AQR412",
-+ .config_aneg = aqr_config_aneg_set_prot,
-+ .config_intr = aqr_config_intr,
-+ .ack_interrupt = aqr_ack_interrupt,
-+ .read_status = aqr107_read_status,
-+},
- };
-
- module_phy_driver(aqr_driver);
-@@ -748,9 +834,11 @@ static struct mdio_device_id __maybe_unu
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
-+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
-+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
- { }
- };
+++ /dev/null
-From 2e677e4ae8f8330f68013163b060d0fda3a43095 Mon Sep 17 00:00:00 2001
-From: "Langer, Thomas" <tlanger@maxlinear.com>
-Date: Fri, 9 Jul 2021 17:36:46 +0200
-Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support
-
-Add a new entry for AQR113 PHY_ID
----
- drivers/net/phy/aquantia_main.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -21,6 +21,7 @@
- #define PHY_ID_AQR106 0x03a1b4d0
- #define PHY_ID_AQR107 0x03a1b4e0
- #define PHY_ID_AQR112 0x03a1b662
-+#define PHY_ID_AQR113 0x31c31c40
- #define PHY_ID_AQR113C 0x31c31c12
- #define PHY_ID_AQCS109 0x03a1b5c2
- #define PHY_ID_AQR405 0x03a1b4b0
-@@ -817,6 +818,14 @@ static struct phy_driver aqr_driver[] =
- .read_status = aqr107_read_status,
- },
- {
-+ PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
-+ .name = "Aquantia AQR113",
-+ .config_aneg = aqr_config_aneg,
-+ .config_intr = aqr_config_intr,
-+ .ack_interrupt = aqr_ack_interrupt,
-+ .read_status = aqr107_read_status,
-+},
-+{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
- .name = "Aquantia AQR412",
- .config_aneg = aqr_config_aneg_set_prot,
-@@ -835,6 +844,7 @@ static struct mdio_device_id __maybe_unu
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
-+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
--- /dev/null
+From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
+From: Alex Marginean <alexandru.marginean@nxp.com>
+Date: Tue, 27 Aug 2019 15:16:56 +0300
+Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
+
+Adds support for AQR112 and AQR412 which is mostly based on existing code
+with the addition of code configuring the protocol on system side.
+This allows changing the system side protocol without having to deploy a
+different firmware on the PHY.
+
+Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
+---
+ drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 88 insertions(+)
+
+--- a/drivers/net/phy/aquantia_main.c
++++ b/drivers/net/phy/aquantia_main.c
+@@ -20,9 +20,11 @@
+ #define PHY_ID_AQR105 0x03a1b4a2
+ #define PHY_ID_AQR106 0x03a1b4d0
+ #define PHY_ID_AQR107 0x03a1b4e0
++#define PHY_ID_AQR112 0x03a1b662
+ #define PHY_ID_AQR113C 0x31c31c12
+ #define PHY_ID_AQCS109 0x03a1b5c2
+ #define PHY_ID_AQR405 0x03a1b4b0
++#define PHY_ID_AQR412 0x03a1b712
+ #define PHY_ID_AQR813 0x31c31cb2
+
+ #define MDIO_PHYXS_VEND_IF_STATUS 0xe812
+@@ -123,6 +125,29 @@
+ #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1)
+ #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0)
+
++/* registers in MDIO_MMD_VEND1 region */
++#define AQUANTIA_VND1_GLOBAL_SC 0x000
++#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb)
++
++/* global start rate, the protocol associated with this speed is used by default
++ * on SI.
++ */
++#define AQUANTIA_VND1_GSTART_RATE 0x31a
++#define AQUANTIA_VND1_GSTART_RATE_OFF 0
++#define AQUANTIA_VND1_GSTART_RATE_100M 1
++#define AQUANTIA_VND1_GSTART_RATE_1G 2
++#define AQUANTIA_VND1_GSTART_RATE_10G 3
++#define AQUANTIA_VND1_GSTART_RATE_2_5G 4
++#define AQUANTIA_VND1_GSTART_RATE_5G 5
++
++/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
++#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b
++#define AQUANTIA_VND1_GSYSCFG_100M 0
++#define AQUANTIA_VND1_GSYSCFG_1G 1
++#define AQUANTIA_VND1_GSYSCFG_2_5G 2
++#define AQUANTIA_VND1_GSYSCFG_5G 3
++#define AQUANTIA_VND1_GSYSCFG_10G 4
++
+ struct aqr107_hw_stat {
+ const char *name;
+ int reg;
+@@ -243,6 +268,51 @@ static int aqr_config_aneg(struct phy_de
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+ }
+
++static struct {
++ u16 syscfg;
++ int cnt;
++ u16 start_rate;
++} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
++ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
++ AQUANTIA_VND1_GSTART_RATE_1G},
++ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
++ AQUANTIA_VND1_GSTART_RATE_2_5G},
++ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G,
++ AQUANTIA_VND1_GSTART_RATE_10G},
++ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G,
++ AQUANTIA_VND1_GSTART_RATE_10G},
++};
++
++/* Sets up protocol on system side before calling aqr_config_aneg */
++static int aqr_config_aneg_set_prot(struct phy_device *phydev)
++{
++ int if_type = phydev->interface;
++ int i;
++
++ if (!aquantia_syscfg[if_type].cnt)
++ return 0;
++
++ /* set PHY in low power mode so we can configure protocols */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
++ AQUANTIA_VND1_GLOBAL_SC_LP);
++ mdelay(10);
++
++ /* set the default rate to enable the SI link */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
++ aquantia_syscfg[if_type].start_rate);
++
++ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
++ phy_write_mmd(phydev, MDIO_MMD_VEND1,
++ AQUANTIA_VND1_GSYSCFG_BASE + i,
++ aquantia_syscfg[if_type].syscfg);
++
++ /* wake PHY back up */
++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
++ mdelay(10);
++
++ return aqr_config_aneg(phydev);
++}
++
+ static int aqr_config_intr(struct phy_device *phydev)
+ {
+ bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
+@@ -738,6 +808,30 @@ static struct phy_driver aqr_driver[] =
+ .get_stats = aqr107_get_stats,
+ .link_change_notify = aqr107_link_change_notify,
+ },
++{
++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
++ .name = "Aquantia AQR112",
++ .probe = aqr107_probe,
++ .config_aneg = aqr_config_aneg_set_prot,
++ .config_intr = aqr_config_intr,
++ .ack_interrupt = aqr_ack_interrupt,
++ .read_status = aqr107_read_status,
++ .get_sset_count = aqr107_get_sset_count,
++ .get_strings = aqr107_get_strings,
++ .get_stats = aqr107_get_stats,
++},
++{
++ PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
++ .name = "Aquantia AQR412",
++ .probe = aqr107_probe,
++ .config_aneg = aqr_config_aneg_set_prot,
++ .config_intr = aqr_config_intr,
++ .ack_interrupt = aqr_ack_interrupt,
++ .read_status = aqr107_read_status,
++ .get_sset_count = aqr107_get_sset_count,
++ .get_strings = aqr107_get_strings,
++ .get_stats = aqr107_get_stats,
++},
+ };
+
+ module_phy_driver(aqr_driver);
+@@ -748,9 +842,11 @@ static struct mdio_device_id __maybe_unu
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
+ { }
+ };
+++ /dev/null
-From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 23 Dec 2021 14:52:56 +0000
-Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R
-
-As advised by Ian Chang this PHY is used in Puzzle devices.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/aquantia_main.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -21,6 +21,8 @@
- #define PHY_ID_AQR106 0x03a1b4d0
- #define PHY_ID_AQR107 0x03a1b4e0
- #define PHY_ID_AQR112 0x03a1b662
-+#define PHY_ID_AQR112C 0x03a1b790
-+#define PHY_ID_AQR112R 0x31c31d12
- #define PHY_ID_AQR113 0x31c31c40
- #define PHY_ID_AQR113C 0x31c31c12
- #define PHY_ID_AQCS109 0x03a1b5c2
-@@ -818,6 +820,22 @@ static struct phy_driver aqr_driver[] =
- .read_status = aqr107_read_status,
- },
- {
-+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C),
-+ .name = "Aquantia AQR112C",
-+ .config_aneg = aqr_config_aneg_set_prot,
-+ .config_intr = aqr_config_intr,
-+ .ack_interrupt = aqr_ack_interrupt,
-+ .read_status = aqr107_read_status,
-+},
-+{
-+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R),
-+ .name = "Aquantia AQR112R",
-+ .config_aneg = aqr_config_aneg_set_prot,
-+ .config_intr = aqr_config_intr,
-+ .ack_interrupt = aqr_ack_interrupt,
-+ .read_status = aqr107_read_status,
-+},
-+{
- PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
- .name = "Aquantia AQR113",
- .config_aneg = aqr_config_aneg,
-@@ -844,6 +862,8 @@ static struct mdio_device_id __maybe_unu
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
-+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) },
-+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
--- /dev/null
+From 5f008cb22f60da4e10375f22266c1a4e20b1252e Mon Sep 17 00:00:00 2001
+From: Alex Marginean <alexandru.marginean@nxp.com>
+Date: Fri, 20 Sep 2019 18:22:52 +0300
+Subject: [PATCH] drivers: net: phy: aquantia: fix system side protocol
+ misconfiguration
+
+Do not set up protocols for speeds that are not supported by FW. Enabling
+these protocols leads to link issues on system side.
+
+Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
+---
+ drivers/net/phy/aquantia_main.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/phy/aquantia_main.c
++++ b/drivers/net/phy/aquantia_main.c
+@@ -301,10 +301,16 @@ static int aqr_config_aneg_set_prot(stru
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
+ aquantia_syscfg[if_type].start_rate);
+
+- for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
++ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) {
++ u16 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1,
++ AQUANTIA_VND1_GSYSCFG_BASE + i);
++ if (!reg)
++ continue;
++
+ phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ AQUANTIA_VND1_GSYSCFG_BASE + i,
+ aquantia_syscfg[if_type].syscfg);
++ }
+
+ /* wake PHY back up */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
--- /dev/null
+From 2e677e4ae8f8330f68013163b060d0fda3a43095 Mon Sep 17 00:00:00 2001
+From: "Langer, Thomas" <tlanger@maxlinear.com>
+Date: Fri, 9 Jul 2021 17:36:46 +0200
+Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support
+
+Add a new entry for AQR113 PHY_ID
+---
+ drivers/net/phy/aquantia_main.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/net/phy/aquantia_main.c
++++ b/drivers/net/phy/aquantia_main.c
+@@ -21,6 +21,7 @@
+ #define PHY_ID_AQR106 0x03a1b4d0
+ #define PHY_ID_AQR107 0x03a1b4e0
+ #define PHY_ID_AQR112 0x03a1b662
++#define PHY_ID_AQR113 0x31c31c40
+ #define PHY_ID_AQR113C 0x31c31c12
+ #define PHY_ID_AQCS109 0x03a1b5c2
+ #define PHY_ID_AQR405 0x03a1b4b0
+@@ -827,6 +828,14 @@ static struct phy_driver aqr_driver[] =
+ .get_stats = aqr107_get_stats,
+ },
+ {
++ PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
++ .name = "Aquantia AQR113",
++ .config_aneg = aqr_config_aneg,
++ .config_intr = aqr_config_intr,
++ .ack_interrupt = aqr_ack_interrupt,
++ .read_status = aqr107_read_status,
++},
++{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
+ .name = "Aquantia AQR412",
+ .probe = aqr107_probe,
+@@ -849,6 +858,7 @@ static struct mdio_device_id __maybe_unu
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
--- /dev/null
+From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Thu, 23 Dec 2021 14:52:56 +0000
+Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R
+
+As advised by Ian Chang this PHY is used in Puzzle devices.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/net/phy/aquantia_main.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/net/phy/aquantia_main.c
++++ b/drivers/net/phy/aquantia_main.c
+@@ -21,6 +21,8 @@
+ #define PHY_ID_AQR106 0x03a1b4d0
+ #define PHY_ID_AQR107 0x03a1b4e0
+ #define PHY_ID_AQR112 0x03a1b662
++#define PHY_ID_AQR112C 0x03a1b790
++#define PHY_ID_AQR112R 0x31c31d12
+ #define PHY_ID_AQR113 0x31c31c40
+ #define PHY_ID_AQR113C 0x31c31c12
+ #define PHY_ID_AQCS109 0x03a1b5c2
+@@ -828,6 +830,30 @@ static struct phy_driver aqr_driver[] =
+ .get_stats = aqr107_get_stats,
+ },
+ {
++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C),
++ .name = "Aquantia AQR112C",
++ .probe = aqr107_probe,
++ .config_aneg = aqr_config_aneg_set_prot,
++ .config_intr = aqr_config_intr,
++ .ack_interrupt = aqr_ack_interrupt,
++ .read_status = aqr107_read_status,
++ .get_sset_count = aqr107_get_sset_count,
++ .get_strings = aqr107_get_strings,
++ .get_stats = aqr107_get_stats,
++},
++{
++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R),
++ .name = "Aquantia AQR112R",
++ .probe = aqr107_probe,
++ .config_aneg = aqr_config_aneg_set_prot,
++ .config_intr = aqr_config_intr,
++ .ack_interrupt = aqr_ack_interrupt,
++ .read_status = aqr107_read_status,
++ .get_sset_count = aqr107_get_sset_count,
++ .get_strings = aqr107_get_strings,
++ .get_stats = aqr107_get_stats,
++},
++{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
+ .name = "Aquantia AQR113",
+ .config_aneg = aqr_config_aneg,
+@@ -858,6 +884,8 @@ static struct mdio_device_id __maybe_unu
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) },
++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
projects / openwrt / openwrt.git / commitdiff