Add stub driver for ADM6996F switches (configured through MII) The driver currently...
authorFelix Fietkau <nbd@openwrt.org>
Sun, 20 Apr 2008 02:53:04 +0000 (02:53 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 20 Apr 2008 02:53:04 +0000 (02:53 +0000)
SVN-Revision: 10869

target/linux/atheros/config-2.6.23
target/linux/generic-2.6/config-2.6.23
target/linux/generic-2.6/files/drivers/net/phy/adm6996.c [new file with mode: 0644]
target/linux/generic-2.6/files/drivers/net/phy/adm6996.h [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch [new file with mode: 0644]
target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch [new file with mode: 0644]

index 72d04fd073b67490c45ea95eac3de6bec4b8e743..2f69da0ba7488fa147f55b68e1e5485a8fa1dc5c 100644 (file)
@@ -1,5 +1,6 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
+CONFIG_ADM6996_PHY=y
 CONFIG_AR2313=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
index d6d982e40da292b3e1162cd535332b88433a8e53..baac771313f3a45870e9cb61662a969e535ea31f 100644 (file)
@@ -5,6 +5,7 @@
 # CONFIG_ACORN_PARTITION is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_AFS_FS is not set
 # CONFIG_AF_RXRPC is not set
diff --git a/target/linux/generic-2.6/files/drivers/net/phy/adm6996.c b/target/linux/generic-2.6/files/drivers/net/phy/adm6996.c
new file mode 100644 (file)
index 0000000..3033813
--- /dev/null
@@ -0,0 +1,170 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include "adm6996.h"
+
+MODULE_DESCRIPTION("Infineon ADM6996 Switch");
+MODULE_AUTHOR("Felix Fietkau");
+MODULE_LICENSE("GPL");
+
+struct adm6996_priv {
+       /* use abstraction for regops, we want to add gpio support in the future */
+       u16 (*read)(struct phy_device *phydev, enum admreg reg);
+       void (*write)(struct phy_device *phydev, enum admreg reg, u16 val);
+};
+
+#define to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv)
+
+
+static inline u16
+r16(struct phy_device *pdev, enum admreg reg)
+{
+       return to_adm(pdev)->read(pdev, reg);
+}
+
+static inline void
+w16(struct phy_device *pdev, enum admreg reg, u16 val)
+{
+       to_adm(pdev)->write(pdev, reg, val);
+}
+
+
+static u16
+adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg)
+{
+       return phydev->bus->read(phydev->bus, PHYADDR(reg));
+}
+
+static void
+adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val)
+{
+       phydev->bus->write(phydev->bus, PHYADDR(reg), val);
+}
+
+
+static int adm6996_config_init(struct phy_device *pdev)
+{
+       int i;
+
+       printk("%s: ADM6996 PHY driver attached.\n", pdev->attached_dev->name);
+       pdev->supported = ADVERTISED_100baseT_Full;
+       pdev->advertising = ADVERTISED_100baseT_Full;
+
+       /* initialize port and vlan settings */
+       for (i = 0; i < ADM_PHY_PORTS; i++) {
+               w16(pdev, adm_portcfg[i], ADM_PORTCFG_INIT |
+                       ADM_PORTCFG_PVID((i == ADM_WAN_PORT) ? 1 : 0));
+       }
+       w16(pdev, adm_portcfg[5], ADM_PORTCFG_CPU);
+
+       /* reset all ports */
+       for (i = 0; i < ADM_PHY_PORTS; i++) {
+               w16(pdev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT);
+       }
+
+       return 0;
+}
+
+static int adm6996_read_status(struct phy_device *phydev)
+{
+       phydev->speed = SPEED_100;
+       phydev->duplex = DUPLEX_FULL;
+       phydev->state = PHY_UP;
+       return 0;
+}
+
+static int adm6996_config_aneg(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static int adm6996_probe(struct phy_device *pdev)
+{
+       struct adm6996_priv *priv;
+
+       priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL);
+       if (priv == NULL)
+               return -ENOMEM;
+
+       priv->read = adm6996_read_mii_reg;
+       priv->write = adm6996_write_mii_reg;
+       pdev->priv = priv;
+       return 0;
+}
+
+static void adm6996_remove(struct phy_device *pdev)
+{
+       kfree(pdev->priv);
+}
+
+static bool adm6996_detect(struct mii_bus *bus, int addr)
+{
+       u16 reg;
+
+       /* we only attach to phy id 0 */
+       if (addr != 0)
+               return false;
+
+       /* look for the switch on the bus */
+       reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK;
+       if (reg != ADM_SIG0_VAL)
+               return false;
+
+       reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK;
+       if (reg != ADM_SIG1_VAL)
+               return false;
+
+       return true;
+}
+
+static struct phy_driver adm6996_driver = {
+       .name           = "Infineon ADM6996",
+       .features       = PHY_BASIC_FEATURES,
+       .detect         = adm6996_detect,
+       .probe          = adm6996_probe,
+       .remove         = adm6996_remove,
+       .config_init    = &adm6996_config_init,
+       .config_aneg    = &adm6996_config_aneg,
+       .read_status    = &adm6996_read_status,
+       .driver         = { .owner = THIS_MODULE,},
+};
+
+static int __init adm6996_init(void)
+{
+       return phy_driver_register(&adm6996_driver);
+}
+
+static void __exit adm6996_exit(void)
+{
+       phy_driver_unregister(&adm6996_driver);
+}
+
+module_init(adm6996_init);
+module_exit(adm6996_exit);
diff --git a/target/linux/generic-2.6/files/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files/drivers/net/phy/adm6996.h
new file mode 100644 (file)
index 0000000..e074901
--- /dev/null
@@ -0,0 +1,105 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#ifndef __ADM6996_H
+#define __ADM6996_H
+
+#define ADM_PHY_PORTS  5
+#define ADM_CPU_PORT   5
+#define ADM_WAN_PORT   0 /* FIXME: dynamic ? */
+
+enum admreg {
+       ADM_EEPROM_BASE         = 0x0,
+               ADM_P0_CFG              = ADM_EEPROM_BASE + 1,
+               ADM_P1_CFG              = ADM_EEPROM_BASE + 3,
+               ADM_P2_CFG              = ADM_EEPROM_BASE + 5,
+               ADM_P3_CFG              = ADM_EEPROM_BASE + 7,
+               ADM_P4_CFG              = ADM_EEPROM_BASE + 8,
+               ADM_P5_CFG              = ADM_EEPROM_BASE + 9,
+       ADM_EEPROM_EXT_BASE     = 0x40,
+       ADM_COUNTER_BASE        = 0xa0,
+               ADM_SIG0                = ADM_COUNTER_BASE + 0,
+               ADM_SIG1                = ADM_COUNTER_BASE + 1,
+       ADM_PHY_BASE            = 0x200,
+#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
+};
+
+/* Chip identification patterns */
+#define        ADM_SIG0_MASK   0xfff0
+#define ADM_SIG0_VAL   0x1020
+#define ADM_SIG1_MASK  0xffff
+#define ADM_SIG1_VAL   0x0007
+
+enum {
+       ADM_PHYCFG_COLTST     = (1 << 7),       /* Enable collision test */
+       ADM_PHYCFG_DPLX       = (1 << 8),       /* Enable full duplex */
+       ADM_PHYCFG_ANEN_RST   = (1 << 9),       /* Restart auto negotiation (self clear) */
+       ADM_PHYCFG_ISO        = (1 << 10),      /* Isolate PHY */
+       ADM_PHYCFG_PDN        = (1 << 11),      /* Power down PHY */
+       ADM_PHYCFG_ANEN       = (1 << 12),      /* Enable auto negotiation */
+       ADM_PHYCFG_SPEED_100  = (1 << 13),      /* Enable 100 Mbit/s */
+       ADM_PHYCFG_LPBK       = (1 << 14),      /* Enable loopback operation */
+       ADM_PHYCFG_RST        = (1 << 15),      /* Reset the port (self clear) */
+       ADM_PHYCFG_INIT = (
+               ADM_PHYCFG_RST |
+               ADM_PHYCFG_SPEED_100 |
+               ADM_PHYCFG_ANEN |
+               ADM_PHYCFG_ANEN_RST
+       )
+};
+
+enum {
+       ADM_PORTCFG_FC        = (1 << 0),       /* Enable 802.x flow control */
+       ADM_PORTCFG_AN        = (1 << 1),       /* Enable auto-negotiation */
+       ADM_PORTCFG_SPEED_100 = (1 << 2),       /* Enable 100 Mbit/s */
+       ADM_PORTCFG_DPLX      = (1 << 3),       /* Enable full duplex */
+       ADM_PORTCFG_OT        = (1 << 4),       /* Output tagged packets */
+       ADM_PORTCFG_PD        = (1 << 5),       /* Port disable */
+       ADM_PORTCFG_TV_PRIO   = (1 << 6),       /* 0 = VLAN based priority
+                                                * 1 = TOS based priority */
+       ADM_PORTCFG_PPE       = (1 << 7),       /* Port based priority enable */
+       ADM_PORTCFG_PP_S      = (1 << 8),       /* Port based priority, 2 bits */
+       ADM_PORTCFG_PVID_BASE = (1 << 10),      /* Primary VLAN id, 4 bits */
+       ADM_PORTCFG_FSE       = (1 << 14),      /* Fx select enable */
+       ADM_PORTCFG_CAM       = (1 << 15),      /* Crossover Auto MDIX */
+
+       ADM_PORTCFG_INIT = (
+               ADM_PORTCFG_FC |
+               ADM_PORTCFG_AN |
+               ADM_PORTCFG_SPEED_100 |
+               ADM_PORTCFG_DPLX |
+               ADM_PORTCFG_CAM
+       ),
+       ADM_PORTCFG_CPU = (
+               ADM_PORTCFG_FC |
+               ADM_PORTCFG_SPEED_100 |
+               ADM_PORTCFG_OT |
+               ADM_PORTCFG_DPLX
+       ),
+};
+
+#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
+#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
+
+static const u8 adm_portcfg[] = {
+       [0] = ADM_P0_CFG,
+       [1] = ADM_P1_CFG,
+       [2] = ADM_P2_CFG,
+       [3] = ADM_P3_CFG,
+       [4] = ADM_P4_CFG,
+       [5] = ADM_P5_CFG,
+};
+
+/*
+ * Split the register address in phy id and register
+ * it will get combined again by the mdio bus op
+ */
+#define PHYADDR(_reg)  ((_reg >> 5) & 0xff), (_reg & 0x1f)
+
+#endif
diff --git a/target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch b/target/linux/generic-2.6/patches-2.6.23/610-phy_detect.patch
new file mode 100644 (file)
index 0000000..394cd37
--- /dev/null
@@ -0,0 +1,30 @@
+Index: linux-2.6.23.16/drivers/net/phy/mdio_bus.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/mdio_bus.c    2008-02-11 07:06:32.000000000 +0100
++++ linux-2.6.23.16/drivers/net/phy/mdio_bus.c 2008-04-20 01:55:46.000000000 +0200
+@@ -131,6 +131,9 @@
+       struct phy_device *phydev = to_phy_device(dev);
+       struct phy_driver *phydrv = to_phy_driver(drv);
++      if (phydrv->detect)
++              return (phydrv->detect(phydev->bus, phydev->addr));
++
+       return ((phydrv->phy_id & phydrv->phy_id_mask) ==
+               (phydev->phy_id & phydrv->phy_id_mask));
+ }
+Index: linux-2.6.23.16/include/linux/phy.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/phy.h   2008-04-20 00:36:18.000000000 +0200
++++ linux-2.6.23.16/include/linux/phy.h        2008-04-20 01:55:04.000000000 +0200
+@@ -319,6 +319,11 @@
+       u32 features;
+       u32 flags;
++      /* Called during discovery to test if the
++       * device can attach to the bus, even if
++       * phy id and mask do not match */
++      bool (*detect)(struct mii_bus *bus, int addr);
++
+       /* Called to initialize the PHY,
+        * including after a reset */
+       int (*config_init)(struct phy_device *phydev);
diff --git a/target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch b/target/linux/generic-2.6/patches-2.6.23/620-phy_adm6996.patch
new file mode 100644 (file)
index 0000000..2997392
--- /dev/null
@@ -0,0 +1,26 @@
+Index: linux-2.6.23.16/drivers/net/phy/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/Kconfig       2008-04-20 04:40:22.000000000 +0200
++++ linux-2.6.23.16/drivers/net/phy/Kconfig    2008-04-20 04:40:32.000000000 +0200
+@@ -60,6 +60,11 @@
+       ---help---
+         Currently supports the IP175C PHY.
++config ADM6996_PHY
++      tristate "Driver for ADM6996 switches"
++      ---help---
++        Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+       tristate "Drivers for PHY emulation on fixed speed/link"
+       ---help---
+Index: linux-2.6.23.16/drivers/net/phy/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/phy/Makefile      2008-04-20 04:40:22.000000000 +0200
++++ linux-2.6.23.16/drivers/net/phy/Makefile   2008-04-20 04:40:32.000000000 +0200
+@@ -12,4 +12,5 @@
+ obj-$(CONFIG_VITESSE_PHY)     += vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)    += broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)      += icplus.o
++obj-$(CONFIG_ADM6996_PHY)     += adm6996.o
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o