bcm4908: prepare to support TP-Link Archer C2300 V1
authorRafał Miłecki <rafal@milecki.pl>
Fri, 5 Mar 2021 13:38:41 +0000 (14:38 +0100)
committerRafał Miłecki <rafal@milecki.pl>
Wed, 17 Mar 2021 20:23:46 +0000 (21:23 +0100)
It's a BCM4906 based device (2 CPU cores). It has 512 MiB of RAM, 4 LAN
ports, 1 WAN port, 2 USB ports, NAND flash. WiFi unknown at this point.

Flashing is possible using CFE only, proper image will be worked on
later.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 8d24da14702b8da820bf2e3952d5691f77136018)

target/linux/bcm4908/image/Makefile
target/linux/bcm4908/image/tplink_archer-c2300-v1/etc/image_version [new file with mode: 0644]
target/linux/bcm4908/image/tplink_archer-c2300-v1/nvram.nvm [new file with mode: 0755]
target/linux/bcm4908/patches-5.4/131-0001-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch [new file with mode: 0644]
target/linux/bcm4908/patches-5.4/131-0002-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch [new file with mode: 0644]

index 8a40a1e6a971b81f4fb1b31193e65cb507ee998f..59284d7b63ebb88203282bdf0ab173058d20852a 100644 (file)
@@ -71,4 +71,14 @@ define Device/netgear_r8000p
 endef
 TARGET_DEVICES += netgear_r8000p
 
+define Device/tplink_archer-c2300-v1
+  DEVICE_VENDOR := TP-Link
+  DEVICE_MODEL := Archer C2300
+  DEVICE_VARIANT := v1
+  DEVICE_DTS := broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1
+  IMAGES := bin
+  IMAGE/bin := append-ubi | bcm4908img
+endef
+TARGET_DEVICES += tplink_archer-c2300-v1
+
 $(eval $(call BuildImage))
diff --git a/target/linux/bcm4908/image/tplink_archer-c2300-v1/etc/image_version b/target/linux/bcm4908/image/tplink_archer-c2300-v1/etc/image_version
new file mode 100644 (file)
index 0000000..4fc5b5c
--- /dev/null
@@ -0,0 +1 @@
+5022HNDrc7HND2221446
diff --git a/target/linux/bcm4908/image/tplink_archer-c2300-v1/nvram.nvm b/target/linux/bcm4908/image/tplink_archer-c2300-v1/nvram.nvm
new file mode 100755 (executable)
index 0000000..422f391
Binary files /dev/null and b/target/linux/bcm4908/image/tplink_archer-c2300-v1/nvram.nvm differ
diff --git a/target/linux/bcm4908/patches-5.4/131-0001-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch b/target/linux/bcm4908/patches-5.4/131-0001-dt-bindings-arm-bcm-document-TP-Link-Archer-C2300-bi.patch
new file mode 100644 (file)
index 0000000..911237b
--- /dev/null
@@ -0,0 +1,21 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 5 Mar 2021 13:34:03 +0100
+Subject: [PATCH] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
+
+One more BCM4906 based device.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
++++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+@@ -21,6 +21,7 @@ properties:
+         items:
+           - enum:
+               - netgear,r8000p
++              - tplink,archer-c2300-v1
+           - const: brcm,bcm4906
+           - const: brcm,bcm4908
diff --git a/target/linux/bcm4908/patches-5.4/131-0002-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch b/target/linux/bcm4908/patches-5.4/131-0002-arm64-dts-broadcom-bcm4908-add-TP-Link-Archer-C2300-.patch
new file mode 100644 (file)
index 0000000..cc1835e
--- /dev/null
@@ -0,0 +1,207 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 5 Mar 2021 13:36:25 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
+
+Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It
+has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports,
+1 WAN port.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/Makefile |   1 +
+ .../bcm4906-tplink-archer-c2300-v1.dts        | 182 ++++++++++++++++++
+ 2 files changed, 183 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+@@ -1,3 +1,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
++dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
+ dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+@@ -0,0 +1,182 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++
++#include "bcm4906.dtsi"
++
++/ {
++      compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
++      model = "TP-Link Archer C2300 V1";
++
++      memory@0 {
++              device_type = "memory";
++              reg = <0x00 0x00 0x00 0x20000000>;
++      };
++
++      leds {
++              compatible = "gpio-leds";
++
++              power-white {
++                      function = LED_FUNCTION_POWER;
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
++              };
++
++              2ghz {
++                      function = "2ghz";
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
++              };
++
++              5ghz {
++                      function = "5ghz";
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
++              };
++
++              wan-amber {
++                      function = LED_FUNCTION_WAN;
++                      color = <LED_COLOR_ID_AMBER>;
++                      gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
++              };
++
++              wan-blue {
++                      function = LED_FUNCTION_WAN;
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
++              };
++
++              lan {
++                      function = LED_FUNCTION_LAN;
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
++              };
++
++              wps {
++                      function = LED_FUNCTION_WPS;
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
++              };
++
++              usb-high-white {
++                      function = "usbup";
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++              };
++
++              usb-low-white {
++                      function = "usbdown";
++                      color = <LED_COLOR_ID_BLUE>;
++                      gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++              };
++
++              brightness {
++                      function = LED_FUNCTION_BACKLIGHT;
++                      color = <LED_COLOR_ID_WHITE>;
++                      gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
++              };
++      };
++
++      gpio-keys-polled {
++              compatible = "gpio-keys-polled";
++              poll-interval = <100>;
++
++              brightness {
++                      label = "LEDs";
++                      linux,code = <KEY_BRIGHTNESS_ZERO>;
++                      gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++              };
++
++              wps {
++                      label = "WPS";
++                      linux,code = <KEY_WPS_BUTTON>;
++                      gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
++              };
++
++              wifi {
++                      label = "WiFi";
++                      linux,code = <KEY_RFKILL>;
++                      gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
++              };
++
++              restart {
++                      label = "Reset";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
++              };
++      };
++};
++
++&usb_phy {
++      brcm,ioc = <1>;
++      status = "okay";
++};
++
++&ehci {
++      status = "okay";
++};
++
++&ohci {
++      status = "okay";
++};
++
++&xhci {
++      status = "okay";
++};
++
++&ports {
++      port@0 {
++              label = "lan4";
++      };
++
++      port@1 {
++              label = "lan3";
++      };
++
++      port@2 {
++              label = "lan2";
++      };
++
++      port@3 {
++              label = "lan1";
++      };
++
++      port@7 {
++              reg = <7>;
++              phy-mode = "internal";
++              phy-handle = <&phy12>;
++              label = "wan";
++      };
++};
++
++&nandcs {
++      nand-ecc-strength = <4>;
++      nand-ecc-step-size = <512>;
++      nand-on-flash-bbt;
++
++      #address-cells = <1>;
++      #size-cells = <0>;
++
++      partitions {
++              compatible = "brcm,bcm4908-partitions";
++              #address-cells = <1>;
++              #size-cells = <1>;
++
++              partition@0 {
++                      label = "cferom";
++                      reg = <0x0 0x100000>;
++              };
++
++              partition@100000 {
++                      compatible = "brcm,bcm4908-firmware";
++                      reg = <0x100000 0x3900000>;
++              };
++
++              partition@5800000 {
++                      compatible = "brcm,bcm4908-firmware";
++                      reg = <0x3a00000 0x3900000>;
++              };
++      };
++};