dtc has new checks for PCI unit address format errors. Fix the unit
address as suggested to fix the new warnings.
arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts: Warning (pci_device_reg): /fpi@
10000000/pci@
e105400/wifi@1814,3092: PCI unit address format error, expected "e,0"
Signed-off-by: Mathias Kresin <dev@kresin.me>
req-mask = <0xf>;
reset-gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
- wifi@0,0 {
+ wifi@e,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
req-mask = <0xf>;
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@0,0 {
+ wifi@e,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@7000 {
+ wifi@e,0 {
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@168c,0029 {
+ wifi@e,0 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
lantiq,external-clock;
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@1814,3592 {
+ wifi@e,0 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
req-mask = <0x3>;
- wifi@1814,3592 {
+ wifi@e,0 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
lantiq,external-clock;
req-mask = <0xf>;
- wifi@168c,0029 {
+ wifi@e,0 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
req-mask = <0xf>;
- wifi@0,0 {
+ wifi@e,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
- wifi@0,0 {
+ wifi@e,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
interrupt-map = <0x7000 0 0 1 &icu0 135>;
req-mask = <0x3>;
- wifi0: wifi@1814,0601 {
+ wifi0: wifi@e,0 {
compatible = "pci1814,0601";
reg = <0x7000 0 0 0 0>;
mtd-mac-address = <&boardconfig 0x16>;
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
req-mask = <0x3>;
- wifi@1814,3592 {
+ wifi@e,0 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@168c,0029 {
+ wifi@e,0 {
compatible = "pci168c,0029";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@168c,0027 {
+ wifi@e,0 {
compatible = "pci168c,0027";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
status = "okay";
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@1814,3592 {
+ wifi@e,0 {
compatible = "pci1814,3592";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
status = "okay";
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@1814,3091 {
+ wifi@e,0 {
compatible = "pci1814,3091";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
};
&pcie_bridge0 {
- wifi@0,0 {
+ wifi@0,0{
compatible = "pci0,0";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
&pcie_bridge0 {
- wifi@168c,002e {
+ wifi@0,0{
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
&pcie_bridge0 {
- wifi@168c,002e {
+ wifi@0,0{
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
&pcie_bridge0 {
- wifi@168c,abcd {
+ wifi@0,0{
compatible = "pci168c,abcd";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
status = "okay";
reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- wifi@168c,002d {
+ wifi@e,0 {
compatible = "pci168c,002d";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
};
&pcie_bridge0 {
- ath9k: wifi@168c,002e {
+ ath9k: wifi@0,0{
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
#gpio-cells = <2>;
};
&pcie_bridge0 {
- wifi@0,0 {
+ wifi@0,0{
reg = <0 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x0000>;
big-endian;
};
&pci0 {
- wifi@1814,3062 {
+ wifi@e,0 {
compatible = "pci1814,3062";
reg = <0x7000 0 0 0 0>;
ralink,eeprom = "RT3062.eeprom";
};
&pci0 {
- wifi@1814,3092 {
+ wifi@e,0 {
compatible = "pci1814,3092";
reg = <0x7000 0 0 0 0>;
ralink,eeprom = "RT3092.eeprom";