ipq806x: drop support for kernel 6.6

Drop support for kernel 6.6 as now kernel 6.12 is set as default kernel
version.

Link: https://github.com/openwrt/openwrt/pull/20644
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq806x: switch to kernel 6.12

Move the ipq806x target to kernel 6.12 by default as every kernel bump
problem has been handled.

Link: https://github.com/openwrt/openwrt/pull/20644
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq806x: 6.12: backport patch to handle CPUFreq with no SMEM

The Google OnHub doesn't init the SMEM in SBL causing the CPUFreq driver
to fail probe. This is caused by the fact that new CPUFreq driver makes
use of SMEM to identify the SoC variant and on Google OnHub this is not
available.

Backport patch to detect this state and fallback to compatible
matching fixing the CPUFreq driver.

Link: https://github.com/openwrt/openwrt/pull/20587
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

tools/cmake: update to 4.1.2

Update cmake to 4.1.2.
Note that cmake 4.x requires at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt of each app to be compiled.

Future cmake versions will increase that requirement to 3.10
https://cmake.org/cmake/help/latest/command/cmake_minimum_required.html

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

libevent2: adjust for cmake 4.x compatibility

Patch CMakeLists.txt for cmake 4.x compatibility.
New cmake versions require at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt. In future 3.10 will be required.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

jansson: adjust for cmake 4.x compatibility

Patch CMakeLists.txt in selected apps for cmake 4.x compatibility.
New cmake versions require at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt. In future 3.10 will be required.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

libjson-c: patch for cmake 4.x compatibility

Patch CMakeLists.txt in selected apps for cmake 4.x compatibility.
New cmake versions require at least 3.5 as 'cmake_minimum_required'
in CMakeLists.txt. In future 3.10 will be required.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

treewide: edit local CMakeLists.txt to be compatible with cmake 4.x

Edit CMakeLists.txt to fulfill cmake 4.0 requirement that
cmake_minimum_required is now at least 3.5 and in future 3.10.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

tools/liblzo: add cmake 4.x compatibility

Patch CMakeLists.txt to fulfill cmake 4.0 requirements
of cmake_minimum_required being at least 3.5 and in future 3.10.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

odhcpd: update to Git HEAD (2025-11-04)

d44af6dd8f4e dhcpv6: create struct dhcpv6_lease
4df45c8c3722 dhcpv4: create struct dhcpv4_lease
a6dccae41b60 odhcpd: struct lease -> struct lease_cfg
fc0abb66f122 dhcpv4: use leasetime from a->lease
74eeff193848 router: always use link-local src address for RAs
b9a071b8341f router: Rewrite the ingress MTU to one configured for the interface
1ef9e0e610d5 router: utilize interface ra_mtu for RA
1480c09ee0aa config: clamp ra_mtu to interface MTU, and default ra_mtu to interface MTU
ee4f0df6bd68 netlink: Store interface MTU at link change
d174e25e85a1 github: fix CI apt dependencies
8f393d55a76e odhcpd: more fixes for IID calculations

https://github.com/openwrt/odhcpd/compare/fc27940fe993...d44af6dd8f4e

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

odhcp6c: update to Git HEAD (2025-11-04)

b3e1db42b4db odhcp6c: fix safe interval processing to follow RFC 4862
63461f64d4c1 dhcpv6: always include IA_NA and IA_PD in Request message if requested
1051cabb4da3 dhcpv6: fix incorrect IA type being printed in syslog
c5237eabeb5c odhcp6c: prevent RELEASE at shutdown when -k is set
a01b1ff1e50f odhcp6c: fix client exiting if Renew and Rebind fails
4839bf6d0feb odhcp6c: implement RKAP: Reconfiguration Key Authentication Protocol
52a9a847def4 dhcpv6: fix solicit loop when server has no address available
7b1f67c23de6 ubus: implement ubus methods to force a Renew and Release
2b0e8f2d8541 ubus: implement retransmission configuration via ubus
8d89d373f360 odhcp6c: add failure when -E option is used without ubus support enabled
58f3c9eb1163 odhcp6c: add new argument option to disable script call
1048fc4fb622 reconfigure: move all configuration functions to a new file
93f056d3a1f2 reconfigure: implement DHCP reconfiguration
af669fb23cd3 dhcpv6: implement statistics for DHCPv6
3a1a599fecb7 ubus: implement UBus method to get state data immediately
44c50214997d ubus: emit UBus event on DHCP state changes
33b972bc526a ubus: connect to UBus backend
2f609f248faf odhcp6c: implement asynchronous handling for DHCPv6 State
6466314e7f62 odhcp6c: enable Non-Blocking DHCPv6 Socket
1df65f0caf46 dhcpv6: refactor dhcp_request Function
047c63a8156b dhcpv6: add t1 and t2 transmission
1b5f0c402bbf dscp: add option to set dscp value
96017df54d8f dhcpv6: fix wrong retransmission of DHCPv6 Solicit
b929fc8a1cfd odhcp6c: add a simple build script
adc651ffed55 cmake: make libubox mandatory
5182e2b696ef cmake: drop EXT_PREFIX_CLASS
8d052c52e18d cmake: disable pedantic
f2521b296b21 github: fix CI apt dependencies

https://github.com/openwrt/odhcp6c/compare/77e1ae21e67f...b3e1db42b4db

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

odhcp6c: add new option to start 4in6 protos as dynamic interface

If proto 'dhcpv6' is set for an interface, dynamic interfaces are created
for the protocols map, dslite or 464xlat if this netifd protocols are
installed and the interface option is not explicitly set to '0'.

The problem is that this option cannot be configured via LuCI, which means
that the dynamic protocols are started. In my case, that is the '464xlat'
'6in4' protocol. I see the follwing log messages continuously in the log as
I do not have a '464xlat' in my network.

Fri Aug 22 10:36:33 2025 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Aug 22 10:36:33 2025 daemon.notice netifd: Interface 'wan6_4' is setting up now
Fri Aug 22 10:36:36 2025 daemon.notice netifd: Interface 'wan6_4' is now down
Fri Aug 22 10:36:36 2025 daemon.notice netifd: Interface 'wan6_4' is setting up now

To fix this by adding a new option to disable the dynamic interface creation
for '4in6' if needed. The option is named '4in6_dynamic' and is a boolean.

If the new option is 'true' (default) dynamic interfaces are create.
If the new option set to 'false' no dynamic 4in6 interface are created.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

odhcp6c: cleanup variable definitions

The variable definitions are very confusing. Therefore, this commit groups
them together so that the line length is not exceeded.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

odhcp6c: use && in if statement on dynamic interfaces

It es recommended to use '&&' to improve readability on 'if' statement.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

odhcp6c: add mtu_dslite option for dhcpv6 proto

This allow configuring the MTU of the ds-lite tunnel.

Updates #8190

Signed-off-by: Mateusz Poliwczak <mpoliwczak34@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20606
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: add support for Zyxel XGS1010-12 A1

This device is very similar to the already supported XGS1210-12 A1. For
now, only revision A1 is supported (not marked on the label).

Hardware:
- RTL9302B SoC
- 16 MiB NOR flash
- 128 MiB DDR3 SDRAM
- 8x 1G RJ45 (RTL8218D)
- 2x 2.5G RJ45 (2x RTL8226)
- 2x SFP+ (supporting 1G/2.5G/10G)
- 3.3V UART serial (115200 baud 8N1) on the right side of the case
  (from bottom to top: GND, RX, TX, VCC)

It is originally an unmanaged switch, so there are a few differences:
- No reset button
- Different partition layout: There is some reserved space in the middle
  of the flash which might be used by the bootloader for flash testing.
  The remaining space in between is used for OpenWrt using mtd-concat.
  The largest contiguous area is at the beginning, allowing a maximum
  kernel size of 7 MiB.
- No individual MAC address: This device ships with an empty U-Boot
  environment. When an OpenWrt squashfs image is booted for the first
  time, a random MAC address will be written to the environment (but
  only if the environment has been initialized from the bootloader
  before and contains the default MAC address).

Steps to boot initramfs image via network:
- Configure a TFTP server to provide the OpenWrt initramfs image
- Connect to device using serial (see hardware information above)
- Power on the device and enter U-Boot using Esc when prompted
- Run the following commands (adjust as necessary):
  # rtk network on
  # tftpboot 0x84f00000 192.168.1.100:openwrt-xgs1010-initramfs.bin
  # bootm

Installation on flash:
- Boot initramfs image as described above
- Now is a good time to create a backup of all flash partitions! You'll
  need this if you want to revert to the unmanaged factory firmware at
  some point.
- Use sysupgrade to install OpenWrt
- After restart enter U-Boot again and set the boot command:
  # setenv bootcmd 'rtk network on; bootm 0xb4900000'
  # saveenv
  # run bootcmd
  Note: The command "rtk network on" is only needed because the drivers
  currently rely on some setup by the bootloader (without this the RJ45
  ports don't work). If the drivers improve in the future, it should be
  removed (i.e. change the boot command to "bootm 0xb4900000").

Reverting to factory firmware:
- Write back your backup of the firmware partition (or write just the
  fwconcat1 partition, and erase the other two fwconcat partitions)
- Change the boot command back to "boota" (or just erase the u-boot-env
  partition so the default gets used)

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/20469
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: restructure Zyxel XGS1210-12 device tree files

This is a preparation for adding support for XGS1010-12, which is almost
identical to XGS1210-12, with some small differences (partition layout,
missing reset key).

In addition to moving the common parts to a new file, also simplify the
definition of the 2.5G PHYs to reduce duplication. With this change, the
revision-specific files only have to specify the SMI addresses.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/20469
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: dsa: remove sds_num entirely

After having moved RTL93XX SerDes configuration from PHY to PCS driver,
the DSA driver doesn't need to know about SerDes explicitly anymore.

Although RTL83XX SerDes is still partly managed within the DSA driver,
it doesn't make use of the sds_num property/field. RTL93XX was the only
user of this right now.

Thus, we can just remove the remaining 'sds_num' code which doesn't
serve any purpose anymore.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20577
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: dsa: remove 'RTL93XX SerDes as PHY' leftovers

RTL93XX SerDes is entirely managed through the PCS driver and not
treated as PHYs anymore. Thus, remove the leftovers from the DSA driver.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20577
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: phy: rtl930x: drop SerDes code

Drop the now unused SerDes code for RTL930X from rtl83xx-phy driver as
the SerDes is completely managed by the PCS driver.

This marks a breaking point because RTL930X SerDes is no longer treated
as a regular PHY device.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20577
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: rtl93xx: remove pseudo-PHYs and phy-handle from SFP ports

RTL93XX reached the point where the SerDes' are no longer treated as
regular PHYs. Instead, they are managed by the dedicated PCS driver.
Thus, all device tree definitions should follow this change.

Remove the pseudo-PHYs for the SerDes (so far usually defined with macro
INTERNAL_PHY) and corresponding 'phy-handle's from all SFP ports. This
removes a long-lasting confusion from our Realtek driver(s).

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20577
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: dsa: allow to drop phy-handle on switch ports

When Realtek SerDes is completely handled by PCS, it is not treated as
a regular PHY anymore. Thus, we should be able to drop the currently
used pseudo-PHYs and phy-handles for ports which just use the SerDes as
PCS but have no PHY attached.

Allow to drop the phy-handle from switch port definitions if there is a
pcs-handle defined by relaxing several checks in the DSA driver.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20577
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: dsa: handle error returned by PCS

Check for and handle an error which may be returned by rtpcs_create in
various cases.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20577
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: dsa,pcs: rtl930x: Disable SerDes patching for 10G-QXGMII

The code to add bootstrapping for 10G-QXGMII on RTL930X broke the only
devices which are using 10G-QXGMII on RTL930X (Plasma Cloud PSX8+PSX10) in
OpenWrt. It is currently unknown what other changes are pending to get this
correctly working. But both the `rtpcs_930x_sds_usxgmii_config()` call and
the write of the "magic" SerDes values in the patching process break the
SerDes connected to the RTL8224 PHYs.

The Plasma Cloud PSX8+PSX10 devices get their RTL8224 and the 10G-QXGMII
SerDes bootstrapped directly by u-boot.

Fixes: dca20f91ea12 ("realtek: add serdes patch for 10G_QXGMII")
Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/20588
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm27xx: package kmod-drm-v3d

Package driver for Broadcom V3D 3.x or newer GPUs.
SoCs supported include the BCM2711, BCM7268 and BCM7278.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

kernel: package kmod-drm-shmem-helper and kmod-drm-sched

Package (hidden) DRM helper modules which are being used by some GPU
drivers.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

scripts/make-index-json: ensure that manifest output is in opkg format

Certain existing tooling, such as 'package-metadata.pl', are written
to accept the output of 'opkg list' with package manifest delimited
by '-'.  The 'make-index-json.py --manifest' output was emulating
the 'apk list --manifest' format without the delimiting dash,
thus breaking these legacy tools.

We fix this by adding the dash to the manifest output, which allows
all existing tooling to process the output irrespective of whether
the build system uses opkg or apk.

Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20094
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq806x: fix sorting in base-files

Align the sorting of cases with other targets.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20603
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq806x: merge duplicated case in base-files

Merge identical case in base-files.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20603
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq806x: remove trailing whitespaces in base-files

This removes the obsolete trailing whitespaces from all base-files cases
to be in line with other targets.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20603
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: use NVMEM-on-UBI  for ASUS Lyra and introduce label mac

Switch the mac lookup to NVMEM on UBI layout and add label-mac

Signed-off-by: Steffen Förster <nemesis@chemnitz.freifunk.net>
Link: https://github.com/openwrt/openwrt/pull/20612
Signed-off-by: Robert Marko <robimarko@gmail.com>

wpa_supplicant: use a timer to defer starting interfaces

This allows wpa_supplicant to process pending netlink socket messages
first. Without this change, there is a race condition where the newly
created interface processes netlink events from the removal of the
previous interface.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

wpa_supplicant: add support for issuing control socket commands via ubus

This makes it possible to have more flexible control over the supplicant
without having to install wpa_cli.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

wpa_supplicant: move per-interface ubus object to ucode

Remove previous implementation

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mediatek/filogic: fix Totolink X6000R sysupgrade failed

Fix Totolink X6000R image failing to upgrade via sysupgrade due to an
incorrect upgrade case. The fallback upgrade path used the NAND upgrade
routine, which caused the "layout volume not found" error on NOR flash
devices. By adding a specific case for this board, sysupgrade now uses
`default_do_upgrade`, which is compatible with the NOR flash layout.

Fixes: 7cd10ad
Signed-off-by: Ayra Hikari <ayrahikari@linuxmail.org>

mediatek: mt7622: fix 2.5G WAN port on Netgear WAX206

Since 6b43a52171f5, the PHY is using interrupts instead of polling. It
turned out that the interrupt number is wrong and the WAN port doesn't
work. This commit fixes this bug.

Fixes: 6b43a52171f5 ("mediatek: mt7622: add the missing phy interrupt-parent for WAX206")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>

mediatek: Add support for Acer Predator Connect W6x Ubootmod

Product name: Acer Predator Connect W6x
link: https://www.acer.com/us-en/predator/networking/wi-fi/predator-connect-w6x/pdp/FF.G2TTA.001
* Specifications:

SOC: MT7986AV
RAM: 1024MB
Flash: 256 MB SPI NAND
Ports: 4 LAN (1G) & 1 WAN (2.5G)
WIFI: MT7976GN + MT7976AN
LED: 1, ws2812b controller

** This commit includes a fix for the GPIO pins for factory/reset and WPS. It was reversed and is now fixed.

* U-Boot Mod Openwrt Installation via UART:

Openwrt Stock Layout Commit: https://github.com/openwrt/openwrt/commit/6e04dccb7ad3191e9a48597a1b354bf548ead1d8
NOTE: Stock Openwrt is not necessary. You can go straight to ubootmod version of the firmware. However, it is recommended to follow stock layout instructions to backup NAND.

1. Configure TFTP server with IP 192.168.1.66. Copy `openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb` to TFTP root and rename to `predator.bin`
2. Interrupt boot by pressing 0 on startup or select `U-Boot Console` in U-Boot Boot Menu.
3. Run setenv `serverip 192.168.1.66; setenv ipaddr 192.168.1.1; tftpboot 0x46000000 predator.bin; bootm` in uboot console.
4. Wait for boot complete on Openwrt initramfs env.
5. Transfer `openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb`,
`openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb`,
`openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip`,
`openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-preloader.bin` to router's /tmp/ directory.
6. run `ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5`
7. run `ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB`
8. run `ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB`
9. run `ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB`
10. run `ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb`
11. install kmod-mtd-rw via opkg or apk.
12. run `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
13. run `mtd write /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-preloader.bin bl2`
14. run `mtd write /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip fip`
15. run `sysupgrade -n /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb`
16. reboot to ubootmod layout

MTD layout before ubootmod:
```
dev:    size   erasesize  name
mtd0: 00100000 00020000 "bl2"
mtd1: 00080000 00020000 "u-boot-env"
mtd2: 00200000 00020000 "factory"
mtd3: 00200000 00020000 "fip"
mtd4: 00020000 00020000 "prod"
mtd5: 00100000 00020000 "dual"
mtd6: 00100000 00020000 "pot"
mtd7: 06400000 00020000 "ubi"
mtd8: 06400000 00020000 "ubi1"
mtd9: 00800000 00020000 "storage"
```

MTD layout after ubootmod:
```
dev:    size   erasesize  name
mtd0: 00100000 00020000 "bl2"
mtd1: 00080000 00020000 "u-boot-env"
mtd2: 00200000 00020000 "factory"
mtd3: 00200000 00020000 "fip"
mtd4: 00020000 00020000 "prod"
mtd5: 0d200000 00020000 "ubi"
```

Signed-off-by: Qing W <ses1er@gmail.com>

uboot-tools: relabel Zyxel devices

Commits d205878ede and 46cf10771a relabeled the supported Zyxel devices
from v1/v2 to A1/B1, but board setup files were overlooked.

Fixes: d205878ede ("rtl838x: rename GS1900 series v1/v2 to A1/B1")
Fixes: 46cf10771a ("rtl839x: rename GS1900 series v1/v2 to A1/B1")
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Link: https://github.com/openwrt/openwrt/pull/20590
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: fix Zyxel relabel

Commits d205878ede and 46cf10771a relabeled the supported Zyxel devices
from v1/v2 to A1/B1, but board setup files were overlooked.

Fixes: d205878ede ("rtl838x: rename GS1900 series v1/v2 to A1/B1")
Fixes: 46cf10771a ("rtl839x: rename GS1900 series v1/v2 to A1/B1")
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Link: https://github.com/openwrt/openwrt/pull/20590
Signed-off-by: Robert Marko <robimarko@gmail.com>

airoha: support openwrt,netdev-name for renaming interfaces

Add support to the airoha target for the OpenWrt-specific DT property
`openwrt,netdev-name`. In particular, this is for interfaces under
non-DSA `airoha_eth` interfaces.

This will avoid conflicts with upstream code[1]; and maintain forward
compatibility with OpenWrt configurations if/when `airoha_eth` becomes
a full DSA driver.

[1] https://lore.kernel.org/netdev/20240709124503.pubki5nwjfbedhhy@skbuf/

Borrowed from d4d6c48 (mediatek: filogic: support openwrt,netdev-name for renaming interfaces)

Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/20475
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: add support for ASUS Lyra Mini (MAP-AC1300)

The device is the little brother of the already supported ASUS Lyra but
with the flash configuration/layout of the RT-AC58U.

Hardware
--------
SOC:    Qualcomm IPQ4019
FLASH:  2MB (Macronix MX25L1606E)
        128MB (GigaDevice GD5F1GQ4UCYIG)
RAM:    256MB (Nanya NT5CC128M16IP-DI)
WIFI:   Qualcomm IPQ4019
BT:     Atheros AR3012-BL3D
ETH:    1x WAN, 1x LAN
LED:    1 RBG LED
BTN:    WPS, Reset
UART:   115200 8N1 (square pin = VCC) VCC-TX-RX-GND

MAC addresses
-------------
LAN     2.4G + 1
WAN     2.4G + 3
2.4G    Label MAC (stored in factory offset 0x1006)
5G      2.4G + 2 (stored in factory offset 0x5006)

Installation
------------
SSH
---
1. Reset the device, setup and enable SSH.
2. Transfer initramfs.itb to /tmp on the device.
3. SSH into the router, credentials are the same as in the web ui.
4. Write initramfs to linux partition:
   mtd-write -d linux -i initramfs.itb
5. Reboot and wait for OpenWrt to boot.
6. Transfer sysupgrade.bin to /tmp on the device.
7. SSH into the router, user root, no pw.
8. Delete jffs2 ubi partition:
   ubirmvol /dev/ubi0 --name=jffs2
9. Flash OpenWrt:
   sysupgrade -n sysupgrade.bin

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20573
Signed-off-by: Robert Marko <robimarko@gmail.com>

Revert "sdk: use git-src-full to allow Git versioning"

This reverts commit f795ecc0ddb40a3d796e6faaa177b545923efc70.

Now that AUTORELEASE has been dropped from main, we can go back on
shallow clone it for faster SDK usage.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

rules.mk: add DEPRECATION NOTICE for AUTORELEASE

Add DEPRECATION NOTICE for AUTORELEASE to signal that any usage of this
should be dropped and fixed.

The macro is still defined for legacy reason but we at least dropped any
usage of it in both main and feeds.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

uboot-bcm53xx: drop usage of AUTORELEASE

AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

uboot-bmips: drop usage of AUTORELEASE

AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

unetmsg: drop usage of AUTORELEASE

AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

provision: drop usage of AUTORELEASE

AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

cli: drop usage of AUTORELEASE

AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ucode-mod-uline: drop usage of AUTORELEASE

AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.

Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: rtl8261n: Add support for Serdes RX swap

Datasheet claims this register bit is supposed to be set by default,
however it was found in practice to not be, and OEM drivers would set
this bit at the same time.

Signed-off-by: Richard Huynh <voxlympha@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20465
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: rtl8261n: Correct serdes global config register

Fix typo in register for the serdes global config.

Fixes: ddb0cd276cff ("kernel: rtl8261n: add support for Serdes TX swap")
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
[ add commit description ]
Link: https://github.com/openwrt/openwrt/pull/20465
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: backport minor fixes for NPU handling

Backport upstream minor fixed for NPU handling that might result in
kernel panic or handle leak.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: Add missing board files for EN7581

Add missing leds and network board files for EN7581 SoC.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
[ drop reference to downstream 10g RFB board ]
Link: https://github.com/openwrt/openwrt/pull/20556
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: adjust and default the loadaddr

Similar to e92b153e99 ("mediatek: introduce KERNEL_LOADADDR to Device/Default template"),
let's move the default loadaddr to Device/Default.

What's more, use 0x80200000 instead of the SDK default value 0x80088000
to avoid the following error which may overwrite TZ memory and cause crash:

    [    0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
    [    0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'atf@80000000': base 0x0000000080000000, size 2 MiB

Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
[ fix spelling mistake ]
Link: https://github.com/openwrt/openwrt/pull/20470
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Revert "elfutils: add compatibility with new fortify-headers"

This reverts commit 096739a93d16fa8a923d3f80e1a9c570be5d38d2.

The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Revert "toolchain: fortify-headers: Update to version 2.3.3"

This reverts commit 6268692bd2bf25a5105c074648f7c899624ecfd7.

The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Revert "toolchain: fortify-headers: Fix build of some packages"

This reverts commit 61f16a6960be0ed9d8d173796fcb4dd633eea317.

The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

airoha: an7581: enable USB node on eMMC RFB board

Enable USB node on eMMC RFB board and disable USB2 3.0 port to make the
3rd PCIe line correctly work.

This is needed to prevent the xHCI driver to mess with PCIe by
configuring the USB2 3.0 port. Port will still be detected but won't be
configureed by the driver and won't have PHY to configure for.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: an7581: correctly attach the USB2 PHY for 3rd PCIe line

The 3rd PCIe line use the USB2 serdes for PCIe operation. Correctly set
it to the DT node so that the mode can be correctly set in the PHY
driver.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: an7581: add USB nodes

Add USB nodes to AN7581 DTSI, disabled by default.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: add pending patch for USB support on AN7581

Add pending patch for USB support on AN7581 SoC. This is also required
to make operational the 3rd PCIe line that use the USB2 Serdes for PCIe
operations.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

realtek: rtl838x: fix regression in enable_phy_polling

Fix regression from back when support for RTL930x was added.
While at it replace 0x8000 by BIT(15).

Fixes: 27029277f98ddd0006175bdc5beec8b0b150f187
Tested-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/20549
Signed-off-by: Robert Marko <robimarko@gmail.com>

wifi-scripts: ucode: fix check for empty crypto object while scanning

it can be empty

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Link: https://github.com/openwrt/openwrt/pull/20526
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: dsa,pcs: rtl930x: let PCS driver setup SerDes

Remove SerDes initialization/configuration calls from the DSA driver in
'rtl93xx_phylink_mac_config' and let our PCS driver setup the SerDes now
that the driver is able to do that.

Adjust some details in rtl93xx_phylink_mac_config to ensure the MAC is
properly disabled MAC before configuring the SerDes. This was done
within the SerDes code before.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20539
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: pcs: rtl930x: use regmap for register access

Use regmap to access registers in the global register space so we don't
have to use the old macros sw_r32/sw_w32 anymore.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20539
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: pcs: rtl930x: import SerDes setup code from PHY driver

Import SerDes configuration code from PHY driver into the PCS driver.
Only do mandatory adjustments, rename the function to adhere to the
naming scheme, adjust all SerDes access calls.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20539
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: fix sysupgrade image for Netgear LBR20

This fixes the sysupgrade image generation for the LBR20 as before
updating resulted in a brick which needed to be recovered using
nmrpflash.

UART log of a bricked unit:
Loading DNI firmware for checking...
Loading firmware 1 ...

NAND read: device 0 offset 0xa600000, size 0x20000
 131072 bytes read: OK

NAND read: device 0 offset 0xa600000, size 0x380000
 3670016 bytes read: OK
rootfs imge header corrupted !
Loading firmware 2 ...

NAND read: device 0 offset 0xa600000, size 0x20000
 131072 bytes read: OK

NAND read: device 0 offset 0xa600000, size 0x380000
 3670016 bytes read: OK
rootfs imge header corrupted !

Comparing the partition contents of a bricked and a working unit showed
that on the bricked one the fake uImage header was missing. The UBI
partition also showed significant changes. Both are fixed when the
base DniImage receipt is used.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20558
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: improve Netgear LBR20 LED config

This aligns the LED behaviour with other Orbi devices. Orbi devices have
multiple RBG LEDs at the top of the device and two status LEDs at the
back next to the barrel jack.
The current behaviour of other Orbi devices is to use the multi-color
LEDs at the top for status indication and the green/red LEDs at the back
for running/panic-indication. This matches the vendor behaviour except
the color choice.
Other devices use green as running, blue on upgrade, red on failsafe and
white on bootup, so this aligns the LBR20 behaviour to the rest.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20558
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: remove ethernet0 alias for Netgear LBR20

This will remove the ethernet0 alias and TODO as setting the LAN MAC via
nvmem to gmac0 will set the correct mac to the switch.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20558
Signed-off-by: Robert Marko <robimarko@gmail.com>

airoha: add nodes for 3rd PCIe line for AN7581

Some SoC might use the Serdes for the second USB port as a 3rd PCIe
line (with the SSTR register correctly setup).

Add the node for the 3rd PCIe card and enable for the eMMC RFB board.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

odhcpd: update to Git HEAD (2025-10-26)

fc27940fe993 dhcpv6: support a configurable DUID
ae16476bcad2 dhcpv6-ia: split reconf_msg struct into partial structs
a3bf57a39958 dhcpv6: split clientid to a separate struct
14da3727ac0c dhcpv6-ia: simplify/fix IID calculations
f49574e42e78 odhcpd: change "-c" cmd line arg to take a dir
0900202c2754 dhcpv4: dhcpv4_lease() - clarify which variables are requests
2c1e6e7c3ebf dhcpv4: dhcpv4_lease() - simplification
48487aedead8 dhcpv4: dhcpv4_lease() - convert to switch statement
3ad54baa4adc dhcpv4: dhcpv4_assign() - explain address assignment
fab8f67818e6 dhcpv6: send timezone only when client requests

https://github.com/openwrt/odhcpd/compare/0d0fac30075f...fc27940fe993

Fixes: 28bb40caafd8 ("odhcpd: update to Git HEAD (2025-10-22)")
Link: https://github.com/openwrt/openwrt/pull/20559
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

elfutils: add compatibility with new fortify-headers

Add compatibility with the new fortify-headers 2.3.3 by
disabling two warnings.

Fixes: 6268692bd2bf ("toolchain: fortify-headers: Update to version 2.3.3")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20552
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

toolchain: fortify-headers: Fix build of some packages

Fix some warnings and compile errors generated by the new
fortify-headers when compiling some applications like strace.

Fixes: 6268692bd2bf ("toolchain: fortify-headers: Update to version 2.3.3")
Link: https://github.com/openwrt/openwrt/pull/20561
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

bmips: fix leds on f@st3864op

gpio-leds were not working on F@ST3864OP before  was merged.

This pull request adds definitions for all LEDs, including the previously
non-working WAN LEDs.

Signed-off-by: Hang Zhou <929513338@qq.com>
Link: https://github.com/openwrt/openwrt/pull/20533
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

realtek: add 10G_QXGMII serdes mode support for RTL930x

In Realtek implementation USXGMII is divided in submodes:
 - USXGMII_SX: 10G single link, equivalent of PHY_INTERFACE_MODE_USXGMII
 - USXGMII_DX: 10G two links (2*5G ?),
 - USXGMII_QX: 10G four links, presumably 4*2.5G, used with the RTL8224,
   equivalent of PHY_INTERFACE_MODE_10G_QXGMII.

This CL adds the 10_GQXGMII modes to the RTL930x implementation. In
particular the "mode set" function is extended to support both simple
mode set, and force mode set depending on the mode according to
dal_longan_sds_mode_set [1].

[1] https://github.com/ddejean/dms-1250-oss-release/blob/main/sdk/sdk_rtk_switch/rtk-sdk/src/dal/longan/dal_longan_sds.c#L1746

Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20472
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: add serdes patch for 10G_QXGMII

Adds the serdes patch sequence [1] and configuration [2] for the
PHY_INTERFACE_MODE_10G_QXGMII mode (aka USXGMII_QX in Realtek sources).
It is required by devices with light bootloaders (ie not u-boot) that
does not initialize the hardware before booting the kernel.

[1] https://github.com/ddejean/dms-1250-oss-release/blob/main/sdk/sdk_rtk_switch/rtk-sdk/src/dal/longan/dal_longan_construct.c#L1075
[2] https://github.com/ddejean/dms-1250-oss-release/blob/main/sdk/sdk_rtk_switch/rtk-sdk/src/dal/longan/dal_longan_construct.c#L1315

Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20472
Signed-off-by: Robert Marko <robimarko@gmail.com>

realtek: add serdes mapping for rtl930x

On the RTL930x series the serdes #3 is backed by serdes #10 when pages
0, 1, 2 or 3 are accessed [1]. This changeset modifies the sds mapping
function from a single implementation for the 3 families to one
implementation per chip family. In particular it implements the mapping
required for the rtl930x one.

[1] https://github.com/ddejean/dms-1250-oss-release/blob/main/sdk/sdk_rtk_switch/rtk-sdk/src/dal/longan/dal_longan_sds.c#L624

Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20472
Signed-off-by: Robert Marko <robimarko@gmail.com>

build: Add _FORTIFY_SOURCE=3 support

Add support for _FORTIFY_SOURCE level 3.

This is supported with glibc and with musl libc.

Link: https://github.com/openwrt/openwrt/pull/20313
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

toolchain: fortify-headers: Update to version 2.3.3

Update to recent fortify-headers version. This version also supports
_FORTIFY_SOURCE=3.

Changes: https://github.com/jvoisin/fortify-headers/compare/1.1...2.3.3

A patch similar to the removed one was applied upstream:
https://github.com/jvoisin/fortify-headers/commit/b40f6d87482f20e968b27470baca042e50cd6792

The root file system is getting a bit bigger.
Without this commit:
5250380 bin/targets/armsr/armv8/openwrt-armsr-armv8-generic-rootfs.tar.gz
4919997 bin/targets/malta/be/openwrt-malta-be-default-rootfs.tar.gz
With this commit:
5263407 bin/targets/armsr/armv8/openwrt-armsr-armv8-generic-rootfs.tar.gz
4930011 bin/targets/malta/be/openwrt-malta-be-default-rootfs.tar.gz

Link: https://github.com/openwrt/openwrt/pull/20313
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

tools: b43-tools: Update to latest HEAD

Add the following changes:
```
12524df b43-asm: fix undefined behavior by using unsigned shift
fa9cb86 Merge pull request #9 from PolynomialDivision/unsinged-fix
5d592cb fwcutter: Fix compiler warning
b96318b dasm: Fix compiler warning
2270cee ssb_sprom: Fix _DEFAULT_SOURCE warning
4781cde ssb_sprom: Fix compiler warning
cce45e3 ssb_sprom: Update .gitignore
5ca416f disassembler: Update .gitignore
44673b6 Update .gitignore
0c8f8b6 assembler: Update .gitignore
1f5b63d fwcutter: Update .gitignore
35fe438 Add README.md
```

Link: https://github.com/openwrt/openwrt/pull/20542
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

uboot-sifiveu: fix build with swig 4.3.0

Fixes the following error by backporting upstream update:
```
scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
 5581 |     resultobj = SWIG_Python_AppendOutput(resultobj, val);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
```

This is the same fix as applied in 4e68103c4eb9 ("uboot-rockchip: fix build with swig 4.3.0")

Link: https://github.com/openwrt/openwrt/pull/20538
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

valgrind: Update to version 3.26.0

The following patches were removed:
 * 010-486180-Valgrind-MIPS-VexGuestArchState-has-no-member.patch [1]
 * 020-mips-skip-using-shared-syscall-numbers-for-mips32.patch [2]
 * 021-mips-skip-using-shared-syscall-numbers-for-mips64.patch [3]

The License changed from GPLv2 to GPLv3. [4]

RISCV64/Linux is supporterd since version 3.25.0.

[1]: https://sourceware.org/git/?p=valgrind.git;a=commitdiff;h=7214886886bce9029f325214156c02dcfff760d5
[2]: https://sourceware.org/git/?p=valgrind.git;a=commitdiff;h=54d6ad3348fb50f5b972fe9c05d0d8757bfe73ba
[3]: https://sourceware.org/git/?p=valgrind.git;a=commitdiff;h=efaa17e53a750d5f0f4c138b507b1b104729ed67
[4]: https://sourceware.org/git/?p=valgrind.git;a=commitdiff;h=3392155359822c0d4e8bb371862e92425054d02a

Link: https://github.com/openwrt/openwrt/pull/20537
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

realtek: fix SFP GPIOs for XikeStor SKS8310-8X

Fix the GPIO assignment of RX-LOS and TX-DISABLE for all SFP ports. Both
were actually swapped when adding support for the device. Apparently,
this didn't cause any issues.

Fixes: 62d50fb196
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20532
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: bump 6.6 to 6.6.114

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.114

Removed upstreamed:
/target/linux/generic/backport-6.6/540-v6.12-ksmbd-browse-interfaces-list-on-FSCTL_QUERY_INTERFACE_INFO.patch

merged upstream with commit: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.114&id=499089376206f3f7f09d6852b3ec92f2674d24bb

All other patches automatically rebased.

Build system: bcm4908
Build system: bcm53xx

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20434
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.113

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.113

Manually rebased:

/target/linux/generic/backport-6.6/540-v6.12-ksmbd-browse-interfaces-list-on-FSCTL_QUERY_INTERFACE_INFO.patch

Dropped patch

/target/linux/generic/backport-6.6/541-v6.18-ksmbd-add-max-ip-connections-parameter.patch

merged upstream with commit:  https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-6.6.y&id=bc718d0bd87e372f7786c0239e340f3577ac94fa

All other patches automatically rebased.

Build system: bcm4908
Build system: bcm53xx

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20434
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.112

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.112

All patches automatically rebased.

Build system: bcm4908
Build system: bcm53xx

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20434
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.111

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.111

All patches automatically rebased.

Build system: bcm4908
Build system: bcm53xx

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20434
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.12 to 6.12.55

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.12.55

Removed upstreamed:
generic/backport-6.12/510-v6.18-ksmbd-fix-recursive-locking-in-RPC-handle-list-access.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.12.55&id=4602b8cee1481dbb896182e5cb1e8cf12910e9e7

Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/20515
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ipq806x: chromium: Pull OnHub caldata directly from VPD

The OnHub bootloader tries to patch the calibration directly into the
device tree, but it uses constant paths that look like this:

  static const char *dt_path = "soc/pci@%8.8x/pcie@0/ath10k@0,0";

  https://chromium.googlesource.com/chromiumos/platform/depthcharge/+/refs/heads/firmware-storm-6315.B/src/board/storm/wifi_calibration.c#69

These paths have changed in recent kernels, so we need to adapte.

The CONFIG_GOOGLE_VPD kernel module (provided by kmod-google-firmware)
is present on OnHub, and provides alternative means to locate this
information, in /sys/firmware/vpd/ro/wifi_base64_calibration{0,1,2}. Use
that instead.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20477
Signed-off-by: Robert Marko <robimarko@gmail.com>

airoha: backport fix for Airoha offload support with airoha_hw_init fail

Backport a patch fixing a kernel panic on airoha_hw_init fail. This
should better handle scenario with NPU load Probe deferring.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: backport cleanup patch for Airoha Ethernet driver

Backport cleanup patch for Airoha Ethernet patch to permit easier
backport in the future.

Automatically refresh all affected patch.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: add pending patch to fix Aeonsemi AS21xxx PHY

Add pending patch to make address some workaround needed to make the
Aeonsemi AS21xxx PHY working on the Airoha AN7581/AN7583 board.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

airoha: an7581: add Aeonsemi AS21xxx PHY to RFB eMMC board

Airoha AN7581 eMMC RFB board mount 2 Aeonsemi AS21xxx PHY. One is
usually connected to GDM4 and the other is optionally connected to GDM2.
Add the relevant nodes to support the one connected to GDM4.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

odhcp6c: change dhcpv6.sh config option "ifaceid" to "ip6ifaceid"

With this change, the interface identifier can be configured via LuCI.

Signed-off-by: Peter Meiser <peter.meiser@gmx.com>
Link: https://github.com/openwrt/openwrt/pull/19318
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: engenius,eXXX: use nvmem

Userspace handling is deprecated.

Move calibration for pcie node out of dtsi. calibration size for ath10k
and ath9k differs.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16231
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: fix sorting in base-files

Align the sorting of cases with other targets.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20518
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: merge duplicated cases in base-files

Merge some identical cases in base-files.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20518
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: use tabs instead of spaces in base-files

This changes the use of spaces to tabs in all base-files to be in line
with other targets.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20518
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: remove trailing whitespaces in base-files

This removes the obsolete trailing whitespaces from all base-files cases
to be in line with other targets.

Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20518
Signed-off-by: Robert Marko <robimarko@gmail.com>

airoha: an7581: add BL2 and BL31+U-Boot Artifacts for RFB board

Pack the BL2 and BL31+U-Boot artifacts as Airoha AN7581 is currently
supported in upstream U-Boot and bootloader files can be used for
unfused boards.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>