openwrt/openwrt.git
2 years agoubus: update to git HEAD
Daniel Golle [Wed, 1 Jun 2022 21:31:01 +0000 (22:31 +0100)]
ubus: update to git HEAD

 2f793a4 lua: add optional path filter to objects() method
 2bebf93 ubusd: handle invoke on event object without data

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2 years agonetifd: update to git HEAD
Daniel Golle [Wed, 1 Jun 2022 19:47:37 +0000 (20:47 +0100)]
netifd: update to git HEAD

 2e1fcf4 netifd: fix hwmode for 60g band
 39ef9fe interface-ip: fix memory corruption bug when using jail network namespaces

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2 years agoprocd: update to git HEAD
Daniel Golle [Wed, 1 Jun 2022 19:44:04 +0000 (20:44 +0100)]
procd: update to git HEAD

 557c98e init: selinux: don't relabel virtual filesystems
 7a00968 init: only relabel rootfs if started from initramfs

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2 years agorpcd: update to latest Git HEAD
Christian 'Ansuel' Marangi [Wed, 1 Jun 2022 13:24:06 +0000 (15:24 +0200)]
rpcd: update to latest Git HEAD

1c48257 iwinfo: fix compilation error with GCC 12

[remove extra change in Makefile]
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
2 years agoRevert "rpcd: update to latest Git HEAD"
Christian 'Ansuel' Marangi [Wed, 1 Jun 2022 13:21:34 +0000 (15:21 +0200)]
Revert "rpcd: update to latest Git HEAD"

This reverts commit 8885cf88279fd131c163d0ac34aeeef0bbff0ceb.

2 years agokernel: add two ksyms to the generic kconfigs
Rui Salvaterra [Wed, 18 May 2022 08:01:17 +0000 (09:01 +0100)]
kernel: add two ksyms to the generic kconfigs

These will be prompted for with GCC 12.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2 years agotoolchain: add support for GCC 12
Rui Salvaterra [Fri, 6 May 2022 14:42:06 +0000 (15:42 +0100)]
toolchain: add support for GCC 12

GCC 12.1 is out. Add support for it.

Deleted (upstreamed):
011-v12-configure-define-TARGET_LIBC_GNUSTACK-on-musl.patch
931-libffi-fix-MIPS-softfloat-build-issue.patch

Deleted (unneeded?)
970-macos_arm64-building-fix.patch

Other patches manually rebased due to C++ conversion and consequent file name
changing (.c to .cc).

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2 years agorpcd: update to latest Git HEAD
Christian 'Ansuel' Marangi [Wed, 1 Jun 2022 12:46:04 +0000 (14:46 +0200)]
rpcd: update to latest Git HEAD

1c48257 iwinfo: fix compilation error with GCC 12

Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
2 years agouhttpd: update to latest Git HEAD
Christian 'Ansuel' Marangi [Wed, 1 Jun 2022 12:41:46 +0000 (14:41 +0200)]
uhttpd: update to latest Git HEAD

d59d732 client: fix compilation error with GCC 12
51283f9 fix compiler uninitialized variable

Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
2 years agotoolchain: bump GCC 11 to 11.3.0
Rui Salvaterra [Thu, 28 Apr 2022 21:44:40 +0000 (22:44 +0100)]
toolchain: bump GCC 11 to 11.3.0

Remove an upstreamed patch and rebase all remaining patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2 years agoucode: update to latest Git HEAD
Jo-Philipp Wich [Wed, 1 Jun 2022 11:26:42 +0000 (13:26 +0200)]
ucode: update to latest Git HEAD

d996047 syntax: adjust number literal parsing and string to number conversion
9efbe18 lib: refactor `uc_int()`

Fixes: #9923
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agofirewall4: update to latest Git HEAD
Jo-Philipp Wich [Tue, 31 May 2022 08:43:53 +0000 (10:43 +0200)]
firewall4: update to latest Git HEAD

210991d fw4: prefer /dev/stdin if available
4e5e322 fw4: make `fw4 restart` behavior more robust
221040e ruleset: emit time ranges when both start and stop times are specified
30a7d47 fw4: fix datetime parsing
fb9a6b2 ruleset: correct mangle_output chain type
6dd2617 fw4: fix logic flaw in testing hw flow offloading support
c7c9c84 fw4: ensure that negative bitcounts are properly translated
c4a78ed fw4: fix typo in emitted set types

Fixes: #9764, #9923, #9927, #9935, #9955
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agoucode: update to latest Git HEAD
Jo-Philipp Wich [Tue, 31 May 2022 08:59:47 +0000 (10:59 +0200)]
ucode: update to latest Git HEAD

da3f089 lib: rework uc_index() implementation
559029e ci: make jobs faster during pull request testing

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agogeneric: 5.15: fix panic on tcp_no_window_check set with interface up
Christian 'Ansuel' Marangi [Sat, 14 May 2022 17:42:24 +0000 (19:42 +0200)]
generic: 5.15: fix panic on tcp_no_window_check set with interface up

The current reworked version cause kernel panic when the value is changes and
an interface is up. Following the tcp_be_liberal impelementation,
reimplement this to permit a safe change of this value without any
panic.
This has been tested with a QSDK package where tcp_no_window_check is used.

Fixes: 92fb51bc9881 ("generic: 5.15: standardize tcp_no_window_check pending patch")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
2 years agorealtek: don't unmask non-maskable GPIO IRQs
Sander Vanheule [Sun, 29 May 2022 17:38:09 +0000 (19:38 +0200)]
realtek: don't unmask non-maskable GPIO IRQs

On uniprocessor builds, for_each_cpu(cpu, mask) will assume 'mask'
always contains exactly one CPU, and ignore the actual mask contents.
This causes the loop to run, even when it shouldn't on an empty mask,
and tries to access an uninitialised pointer.

Fix this by wrapping the loop in a cpumask_empty() check, to ensure it
will not run on uniprocessor builds if the CPU mask is empty.

Fixes: af6cd37f42f3 ("realtek: replace RTL93xx GPIO patches")
Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reported-by: Robert Marko <robimarko@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2 years agoath79: fix label MAC address for D-Link DIR-825B1
Sebastian Schaper [Fri, 27 May 2022 15:22:52 +0000 (17:22 +0200)]
ath79: fix label MAC address for D-Link DIR-825B1

The label MAC address for DIR-825 Rev. B1 is the WAN address located
at 0xffb4 in `caldata`, which equals LAN MAC at 0xffa0 incremented by 1.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2 years agoramips: disable unsupported background-radar
David Bauer [Fri, 22 Apr 2022 00:02:48 +0000 (02:02 +0200)]
ramips: disable unsupported background-radar

The UniFi 6 Lite as well as the Tenbay T-MB5EU do not have the third
background-radar chain. For the Tenbay, the connector is present,
however no antenna is connected to it.

Signed-off-by: David Bauer <mail@david-bauer.net>
2 years agomac80211: introduce BSS color collision detection
David Bauer [Tue, 17 May 2022 22:10:43 +0000 (00:10 +0200)]
mac80211: introduce BSS color collision detection

Add ieee80211_rx_check_bss_color_collision routine in order to introduce
BSS color collision detection in mac80211 if it is not supported in HW/FW
(e.g. for mt7915 chipset).
Add IEEE80211_HW_DETECTS_COLOR_COLLISION flag to let the driver notify
BSS color collision detection is supported in HW/FW. Set this for ath11k
which apparently didn't need this code.

Tested-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a05eeeb1841a84560dc5aaec77894fcb69a54f27.1648204871.git.lorenzo@kernel.org
[clarify commit message a bit, move flag to mac80211]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
2 years agomalta: use default OpenWrt network configuration
Hauke Mehrtens [Sat, 28 May 2022 12:32:08 +0000 (14:32 +0200)]
malta: use default OpenWrt network configuration

Currently malta configures the first Ethernet device as WAN interface.
If it finds a second one it will configure it as LAN.

This commit reverses it to match armvirt and x86. If there is only one
network device it will be configured as LAN device now. If we find two
network devices the 2. one will be WAN.

If no board.d network configuration is given it will be configured in
package/base-files/files/etc/board.d/99-default_network

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[minor typos]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2 years agouboot-imx: fix wrong make flags overriding
Petr Štetiar [Sat, 28 May 2022 12:18:06 +0000 (14:18 +0200)]
uboot-imx: fix wrong make flags overriding

Buidbots are currently choking on the following compile error:

 In file included from tools/aisimage.c:9:
 include/image.h:1133:12: fatal error: openssl/evp.h: No such file or directory
  #  include <openssl/evp.h>
             ^~~~~~~~~~~~~~~
 compilation terminated.

This is caused by a complete overriding of make flags which are provided
correctly in `UBOOT_MAKE_FLAGS` variable, but currently overriden
instead of extended. This then leads to the usage of build host include
dirs, which are not available.

Fix it by extending `UBOOT_MAKE_FLAGS` variable in all device recipes.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2 years agokernel: backport flow offload fixes
Ritaro Takenaka [Tue, 24 May 2022 17:51:19 +0000 (02:51 +0900)]
kernel: backport flow offload fixes

Some dst in IPv6 flow offload table become invalid after the table is created.
So check_dst is needed in packet path.

Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com>
[Add patch for kernel 5.15 too and rename file]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 years agoipq40xx: cut ath10k board file for mikrotik subtarget
John Thomson [Fri, 20 May 2022 22:13:21 +0000 (08:13 +1000)]
ipq40xx: cut ath10k board file for mikrotik subtarget

Avoid shipping ath10k board file in Mikrotik initram images

Most will only ever need to use these initram images once—to initially
load OpenWrt, but fix these images for more consistent Wi-Fi performance
between the initram and installed squashfs images.

OpenWrt BUILDBOT config ignores -cut packages in the initram images build.
This results in BUILDBOT initram images including the linux-firmware
qca4019 board-2.bin, and (initram image booted) Mikrotik devices loading
a generic BDF, rather than the intended BDF data loaded
from NOR as an api 1 board_file.

buildbot snapshot booted as initram image:
cat /etc/openwrt_version
r19679-810eac8c7f
dmesg | grep ath10k | grep -E board\|BDF
[    9.794556] ath10k_ahb a000000.wifi: Loading BDF type 0
[    9.807192] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16
crc32 11892f9b
[   12.457105] ath10k_ahb a800000.wifi: Loading BDF type 0
[   12.464945] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17
crc32 11892f9b

CC: Robert Marko <robimarko@gmail.com>
Fixes: 5eee67a72fed ("ipq40xx: mikrotik: dont include ath10k-board-qca4019 by default")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2 years agoksmbd: fix ipc error and crash
Marius Dinu [Wed, 18 May 2022 09:28:59 +0000 (12:28 +0300)]
ksmbd: fix ipc error and crash

Original patch: https://github.com/cifsd-team/ksmbd-tools/issues/227
adapted for ksmbd kernel module v3.4.3 by me.
Fixes crash in v3.4.3 only. Use original patch when updating to v3.4.4
as this one will fail hunk #1.

Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
2 years agofirmware-utils: bump to git HEAD
Sander Vanheule [Fri, 27 May 2022 08:14:21 +0000 (10:14 +0200)]
firmware-utils: bump to git HEAD

Fixes an out of bounds issue, adds support for TP-Link safeloader images
with non-default partition names, and adds image generation support for:
  - TP-Link Archer A6 v2 (EU)
  - TP-Link EAP225 v4
  - TP-Link EAP225-Outdoor v3

365458e00ed7 tplink-safeloader: join EAP225-V3 compatible devices
0277810d353d tplink-safeloader: fix chunked support-list prints
a64f89c66318 tplink-safeloader: Patch to handle partitions with alternate names.
07f78f071075 firmware-utils: tplink-safeloader: add support for Archer A6 v2 (EU)
49ea62160d21 tplink-safeloader: fix alphabetical order

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2 years agobmips: dgnd3700v2: fix network config
Álvaro Fernández Rojas [Mon, 23 May 2022 19:05:59 +0000 (21:05 +0200)]
bmips: dgnd3700v2: fix network config

ucidef_set_bridge_device is needed for DGND3700v2 network config since VLAN 1
must be used for the switch to be correctly configured.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agonetifd: update to the latest version
Felix Fietkau [Mon, 23 May 2022 12:12:28 +0000 (14:12 +0200)]
netifd: update to the latest version

4b4849cf5e5a interface-ip: unify host and proto route handling
507c0513d176 interface-ip: add support for excluding interfaces in host route lookup

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agolibnl-tiny: update to the latest version
Felix Fietkau [Tue, 17 May 2022 18:17:11 +0000 (20:17 +0200)]
libnl-tiny: update to the latest version

b5b2ba09c4f1 netlink: add NLA_F_NESTED to all nested attributes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agobcm27xx: add pwm-fan dependency to RPi PoE
Álvaro Fernández Rojas [Sun, 22 May 2022 20:04:08 +0000 (22:04 +0200)]
bcm27xx: add pwm-fan dependency to RPi PoE

This is needed for the fan in the PoE hat to work.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agorealtek: replace RTL93xx GPIO patches
Sander Vanheule [Thu, 14 Apr 2022 19:57:54 +0000 (21:57 +0200)]
realtek: replace RTL93xx GPIO patches

Patches to support the SoC's GPIO controller for RTL930x and RTL931x
devices have been accepted upstream. Replace the current preliminary
patch with the upstream ones, excluding devictree binding changes.

The updated patches add GPIO IRQ balancing support on RTL930x, but this
cannot be used until these devices also support SMP.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2 years agomediatek: mt7622: add support for ELECOM WRC-X3200GST3
INAGAKI Hiroshi [Fri, 23 Apr 2021 09:32:11 +0000 (18:32 +0900)]
mediatek: mt7622: add support for ELECOM WRC-X3200GST3

ELECOM WRC-X3200GST3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
MT7622B.

Specifications:

- SoC : MediaTek MT7622B
- RAM : DDR3 512 MiB (Nanya NT5CC256M16ER-EK)
- Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG)
- WLAN : 2.4/5 GHz 4T4R
  - 2.4 GHz : MediaTek MT7622B (SoC)
  - 5 GHz : MediaTek MT7915A
- Ethernet : 5x 10/100/1000 Mbps
  - Switch : MediaTek MT7531
- LEDs/Keys : 6x/4x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
  - J19: 3.3V, GND, TX, RX from power jack side
  - 115200n8
- Power : 12 VDC, 1.5 A

Flash instruction using factory image:

1. Boot WRC-X3200GST3 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

MAC Addresses:

LAN    : 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex))
WAN    : 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex))
2.4 GHz: 04:AB:18:xx:xx:79 (Factory, 0x4     (hex))
5 GHz  : 04:AB:18:xx:xx:7A (none)

Note:

- currently, there is no "phy1tpt" trigger for 5 GHz wlan (MT7915) in
  "trigger" file of LEDs, use "phy1radio" trigger instead

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2 years agoselinux-policy: update to version 1.2.3
Dominick Grift [Thu, 19 May 2022 16:50:16 +0000 (18:50 +0200)]
selinux-policy: update to version 1.2.3

86ca9c6 devstatus: prints to terminal
95de949 deal with /rom/dev/console label inconsistencies
ab6b6ee uci: hack to deal with potentially mislabeled char files
acf9172 dnsmasq this can't be right
021db5b luci-app-tinyproxy
cf3a9c4 support/secmark: removes duplicate loopback rules
eeb2610 dhcp servers: recv dhcp client packets
d5a5fc3 more support/secmark "fixes"
35d8604 update support secmark
4c155c0 packets these were caused by labeling issues with loopback
fad35a5 nftables reads routing table
f9c5a04 umurmur: kill an mumur instance that does not run as root
10a10c6 mmc stordev make this consistent
ab3ec5b Makefile: sort with LC_ALL=C
b34eaa5 fwenv rules
8c2960f adds rfkill nodedev and some mmc partitions to stordev
5a9ffe9 rcboot runs fwenv with a transition
9954bf6 dnsmasq in case of tcp
ab66468 dnsmasq try this
5bfcb88 dnsmasq stubby not sure why this is happening
863f549 luci not sure why it recv and send server packets
d5cddb0 uhttpd sends sigkill luci cgi
44cc04d stubby: it does not maintain anything in there
db730b4 Adds stubby
ccbcf0e tor simplify network access
a308065 tor basic
a9c0163 znc loose ends
327a9af acme: allow acme_cleanup.sh to restart znc
4015614 basic znc
7ef14a2 support/secmark: clarify some things
3107afe README: todo qrencode
943035a README and secmark doc
4c90937 ttyd: fix that socket leak again
3239adf dnsmasq icmp packets and fix a tty leak issue
b41d38f Makefile: optimize
95d05b1 sandbox dontaudit ttyd leak
0b7d670 rpcd: reads mtu
e754bf1 opkg-lists try this
35fb530 opkg-lists: custom
4328754 opkg try to address mislabeled /tmp/opkg-lists
3e2385c rcnftqos
95eae2d ucode
c86d366 luci diagnostics
e10b443 rpcd packets and wireguard/luci
a25e020 igmpproxt packets
0106f00 luci
dcef79c nftqos related
3c9bc90 related to nft-qos and luci
f8502d4 dnsmasq more related to /usr/lib/dnsmasq/dhcp-script.sh
29a4271 dnsmasq: related to /usr/lib/dnsmasq/dhcp-script.sh
0c5805a some nft-qos
1100b41 adds a label for /tmp/.ujailnoafile
e141a83 initscript: i labeled ujail procd.execfile
a3b0302 Makefile: adds a default target + packets target
6a3f8ef label usign as opkg and label fwtool and sysupgrade
04d1cc7 sysupgrade: i meant don't do the fc spec
763bec0 sysupgrade: dont do /tmp/sysupgrade.img
af2306f adds a failsafe.tmpfile and labels validate_firmware_image
5b15760 fwenv: comment doesnt make sense
370ac3b fwenv: executes shell
67e3fcb fwenv: adds fw_setsys
544d211 adds procd execfile module to label procd related exec files
99d5f13 rclocalconffile: treat /etc/rc.button like /etc/rc.local
4dfd662 label uclient-fetch the same as wget
75d8212 osreleasemiscfile: adds /etc/device_info
0c1f116 adds a rcbuttonconffile for /etc/rc.button (base-files)
ccd23f8 adds a syslog.conffile for /etc/syslog.conf (busybox)
f790600 adds a libattr.conffile for /etc/xattr.conf
fcc028e fwenv: adds fwsys
1255470 xtables: various iptables alternatives
a7c4035 Revert "sqm: runs xtables, so also allow nftables"
0d331c3 sqm: runs xtables, so also allow nftables
f34076b acme: will run nftables in the near future
6217046 allow ssl.read types to read /tmp/etc/ssl/engines.cnf
d0deea3 fixes dns packets
8399efc Revert "sandbox: see if dontauditing this affects things"
73d716a sandbox: see if dontauditing this affects things
b5ee097 sandbox: also allow readinherited dropbear pipes
12ee46b iwinfo traverses /tmp/run/wpa_supplicant
4a4d724 agent.cil: also reads inherited dropbear pipes
d48013f support/secmark: i tightened my dns packet policy
645ad9e dns packets redone
4790b25 dnsnetpacket: fix obj macro template
d9fafff redo dns packets
0a68498 ttyd: leaks a netlink route socket
1d2e6be .gitattributes: remove todo
e1bb954 usbutil: reads bus sysfile symlinks
d275a32 support/secmark: clean it up a little
af5ce12 Makefile: exclude packet types in default make target
3caacdf support/secmark: document tunable/boolean
e3dd3e6 invalidpacketselinuxbool: make it build-time again
54f0ccf odhcpd packet fix
4a864ba contrib/secmark: add a big FAT warning
bead937 contrib/secmark: adds note about secmark support
146ae16 netpacket remove test
2ce9899 dns packets, odhcp6c raw packet, 4123 ntpnts for netnod
070a45f chrony and unbound packets
eba894f rawip socket packets cannot be labeled
656ae0b adds isakmp (500), ipsec-nat-t (4500) and rawip packet types
35325db adds igmp packet type
5cf444c adds icmp packet type
2e41304 sandbox some more packet access for sandbox net
12caad6 packet accesses
b8eb9a8 adds a trunkload of packet types
a42a336 move rules related to invalid netpeers and ipsec associations
a9e40e0 xtables/nftables allow relabelto all packet types
aa5a52c README: adds item to wish list
3a96eec experiment: simple label based packet filtering
26d6f95 nftables reads/writes fw pipes

Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
2 years agoath79: NanoBeam M5 fix target_devices
Jan-Niklas Burfeind [Sat, 21 May 2022 15:17:34 +0000 (17:17 +0200)]
ath79: NanoBeam M5 fix target_devices

Update the name of for the Ubiquiti NanoBeam M5 to match the
auto-generated one at runtime. Otherwise sysupgrade complains about
mismatching device names.

This also required renaming the DTS.

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2 years agoath79: add support for Ubiquiti NanoBeam M5
Jan-Niklas Burfeind [Sat, 23 Apr 2022 15:49:34 +0000 (17:49 +0200)]
ath79: add support for Ubiquiti NanoBeam M5

Ubiquiti NanoBeam M5 devices are CPE equipment for customer locations
with one Ethernet port and a 5 GHz 300Mbps wireless interface.

Specificatons:

- Atheros AR9342
- 535 MHz CPU
- 64 MB RAM
- 8 MB Flash
- 1x 10/100 Mbps Ethernet with passive PoE input (24 V)
- 6 LEDs of which four are rssi
- 1 reset button
- UART (4-pin) header on PCB

Notes:

The device was supported by OpenWrt in ar71xx.

Flash instructions (web/ssh/tftp):

Loading the image via ssh vias a stock firmware prior "AirOS 5.6".
Downgrading stock is possible.

* Flashing is possible via AirOS software update page:
The "factory" ROM image is recognized as non-native and then installed correctly.
AirOS warns to better be familiar with the recovery procedure.

* Flashing can be done via ssh, which is becoming difficult due to legacy
keyexchange methods.

This is an exempary ssh-config:
KexAlgorithms +diffie-hellman-group1-sha1
HostKeyAlgorithms ssh-rsa
PubkeyAcceptedKeyTypes ssh-rsa
User ubnt

The password is ubnt.

Connecting via IPv6 link local worked best for me.

1. scp the factory image to /tmp
2. fwupdate.real -m /tmp/firmware_image_file.bin -d

* Alternatively tftp is possible:

1. Configure PC with static IP 192.168.1.2/24.
2. Enter the rescue mode. Power off the device, push the reset button on
   the device (or the PoE) and keep it pressed.
   Power on the device, while still pushing the reset button.
3. When all the leds blink at the same time, release the reset button.
4. Upload the firmware image file via TFTP:

tftp 192.168.1.20
tftp> bin
tftp> trace
Packet tracing on.
tftp> put firmware_image.bin

Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
2 years agoath79: add support for MikroTik hAP (RB951Ui-2nD)
Maciej Krüger [Thu, 19 May 2022 18:00:53 +0000 (20:00 +0200)]
ath79: add support for MikroTik hAP (RB951Ui-2nD)

The MikroTik hAP (product code RB951Ui-2nD) is
an indoor 2.4Ghz AP with a 2 dBi integrated antenna built around the
Atheros QCA9531 SoC.

Specifications:
 - SoC: Atheros QCA9531
 - RAM: 64 MB
 - Storage: 16 MB NOR - Winbond 25Q128FVSG
 - Wireless: Atheros QCA9530 (SoC) 802.11b/g/n 2x2
 - Ethernet: Atheros AR934X switch, 5x 10/100 ports,
   10-28 V passive PoE in port 1, 500 mA PoE out on port 5
 - 8 user-controllable LEDs:
   · 1x power (green)
   · 1x user (green)
   · 4x LAN status (green)
   · 1x WAN status (green)
   · 1x PoE power status (red)

See https://mikrotik.com/product/RB951Ui-2nD for more details.

Notes:
 The device was already supported in the ar71xx target.

Flashing:
 TFTP boot initramfs image and then perform sysupgrade. Follow common
 MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Maciej Krüger <mkg20001@gmail.com>
2 years agoath79: add support for MikroTik RouterBOARD hAP ac lite
Thibaut VARÈNE [Mon, 2 May 2022 15:07:45 +0000 (17:07 +0200)]
ath79: add support for MikroTik RouterBOARD hAP ac lite

The MikroTik RB952Ui-5ac2nD (sold as hAP ac lite) is an indoor 2.4Ghz
and 5GHz AP/router with a 2 dBi integrated antenna.

See https://mikrotik.com/product/RB952Ui-5ac2nD for more details.

Specifications:
 - SoC: QCA9533
 - RAM: 64MB
 - Storage: 16MB NOR
 - Wireless: QCA9533 802.11b/g/n 2x2 / QCA9887 802.11a/n/ac 2x2
 - Ethernet: AR934X switch, 5x 10/100 ports,
    10-28 V passive PoE in port 1, 500 mA PoE out on port 5
 - 6 user-controllable LEDs:
   - 1x user (green)
   - 5x port status (green)

Flashing:
 TFTP boot initramfs image and then perform sysupgrade. The "Internet"
 port (port number 1) must be used to upload the TFTP image, then
 connect to any other port to access the OpenWRT system.
 Follow common MikroTik procedure as in
 https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2 years agobcm27xx: sound-soc-rpi-cirrus: fix package
Álvaro Fernández Rojas [Fri, 20 May 2022 18:59:36 +0000 (20:59 +0200)]
bcm27xx: sound-soc-rpi-cirrus: fix package

Fix kmod-sound-soc-rpi-cirrus package dependencies.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agofirewall4: update to latest Git HEAD
Jo-Philipp Wich [Tue, 17 May 2022 19:01:46 +0000 (21:01 +0200)]
firewall4: update to latest Git HEAD

c22eeef fw4: support negative CIDR bit notation
628d791 hotplug: reliably handle interfaces with ubus zone hints
d005293 fw4: store zone associations from ubus in statefile as well
b268225 fw4: filter non hw-offload capable devices when resolving lower devices
57984e0 fw4: always resolve lower flowtable devices
7782017 tests: fix mocked `fd.read("line")` api
72b196d config: remove restictions on DHCPv6 allow rule
f0cc317 fw4: refactor family selection for forwarding rules
b0b8122 treewide: use modern syntax
05995f1 fw4: fix emitting device jump rules for family restricted zones
b479815 fw4: fix family auto-selection for config nat rules
2816a82 ruleset: ensure that family-agnostic ICMP rules cover ICMPv6 as well
2379c3d tests: add test coverage for zone family selection logic

Fixes: #5066, #9611, #9765, #9854
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agoucode: update to latest Git HEAD
Jo-Philipp Wich [Fri, 20 May 2022 17:51:02 +0000 (19:51 +0200)]
ucode: update to latest Git HEAD

081871e compiler: fix segmentation fault on compiling unexpected unary expressions
090b426 fs: avoid input buffering with small limits in fs.readfile()
8da140f lib: introduce hexenc() and hexdec()
9a72423 Update README.md

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agobcm63xx: add linux v5.15 support
Álvaro Fernández Rojas [Fri, 20 May 2022 12:27:22 +0000 (14:27 +0200)]
bcm63xx: add linux v5.15 support

Build system: x86_64
Build-tested: generic, smp
Run-tested: generic/AR-5387un, smp/VR-3032u

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: modules: video: fix whitespace
Álvaro Fernández Rojas [Fri, 20 May 2022 06:06:03 +0000 (08:06 +0200)]
bcm27xx: modules: video: fix whitespace

No idea how this ended up here v2...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: enable PWM drivers in config
Álvaro Fernández Rojas [Thu, 19 May 2022 18:11:08 +0000 (20:11 +0200)]
bcm27xx: enable PWM drivers in config

Removes PWM module package.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobmips: rework ARCH_HAS_SYNC_DMA_FOR_CPU_ALL patch
Álvaro Fernández Rojas [Fri, 20 May 2022 11:09:26 +0000 (13:09 +0200)]
bmips: rework ARCH_HAS_SYNC_DMA_FOR_CPU_ALL patch

Let's disable ARCH_HAS_SYNC_DMA_FOR_CPU_ALL only for BCM6358.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobmips: remove linux 5.10 compatibility
Álvaro Fernández Rojas [Fri, 20 May 2022 10:39:34 +0000 (12:39 +0200)]
bmips: remove linux 5.10 compatibility

A devent amount of patches have been upstreamed, so maintaining linux 5.10 on
this target makes no sense.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobmips: switch to linux 5.15
Álvaro Fernández Rojas [Fri, 20 May 2022 10:36:43 +0000 (12:36 +0200)]
bmips: switch to linux 5.15

I tested it locally and I couldn't find any regressions, so let's give this a
wider test :).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobmips: add linux v5.15 support
Álvaro Fernández Rojas [Wed, 18 May 2022 20:52:06 +0000 (22:52 +0200)]
bmips: add linux v5.15 support

Build system: x86_64
Build-tested: generic, nand
Run-tested: generic/AR-5387un, nand/VR-3032u

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: base-files: align network files
Álvaro Fernández Rojas [Wed, 18 May 2022 16:59:18 +0000 (18:59 +0200)]
bcm27xx: base-files: align network files

- Use the same order for /etc/board.d/02_network and
/lib/preinit/05_set_preinit_iface_brcm2708.
- Add missing RPi 400 and CM4 to /lib/preinit/05_set_preinit_iface_brcm2708.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: diag.sh: fix whitespace
Álvaro Fernández Rojas [Wed, 18 May 2022 16:57:58 +0000 (18:57 +0200)]
bcm27xx: diag.sh: fix whitespace

No idea how this ended up here...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agoipq40xx: mikrotik: dont include ath10k-board-qca4019 by default
Robert Marko [Sat, 14 May 2022 18:30:44 +0000 (20:30 +0200)]
ipq40xx: mikrotik: dont include ath10k-board-qca4019 by default

Since MikroTik subtarget now uses dynamic BDF loading its crucial that it
doesnt include the board-2.bin at all which is provided by the
ath10k-board-qca4019 package.

So to resolve this dont include the ath10k-board-qca4019 package on the
MikroTik subtarget.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2 years agoipq-wifi: remove packaged BDF-s for MikroTik devices
Robert Marko [Tue, 30 Nov 2021 09:25:52 +0000 (10:25 +0100)]
ipq-wifi: remove packaged BDF-s for MikroTik devices

Since we now provide the BDF-s for MikroTik IPQ40xx devices on the fly,
there is noneed to include package and ship them like we do now.

This also resolves the performance issues that happen as MikroTik
changes the boards and ships them under the same revision but they
actually ship with and require a different BDF.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2 years agoipq40xx: mikrotik: provide BDF-s on demand
Robert Marko [Tue, 30 Nov 2021 09:27:50 +0000 (10:27 +0100)]
ipq40xx: mikrotik: provide BDF-s on demand

Since we now can pass the API 1 BDF-s aka board.bin to the ath10k
driver per radio lets use that to provide the BDF-s for MikroTik devices.

This also resolves the performance issues that happen as MikroTik changes
the boards and ships them under the same revision but they actually ship
with and require a different BDF.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2 years agomac80211: ath10k: backport bus and device specific API 1 BDF selection
Robert Marko [Tue, 30 Nov 2021 09:37:41 +0000 (10:37 +0100)]
mac80211: ath10k: backport bus and device specific API 1 BDF selection

Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the
BDF-s to be extracted from the device storage instead of shipping packaged
API 2 BDF-s.

This is required as MikroTik has started shipping boards that require BDF-s
to be updated, as otherwise their WLAN performance really suffers.
This is however impossible as the devices that require this are release under
the same revision and its not possible to differentiate them from devices
using the older BDF-s.

In OpenWrt we are extracting the calibration data during runtime and we are
able to extract the BDF-s in the same manner, however we cannot package the
BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on
the fly.
This is an issue as the ath10k driver explicitly looks only for the board.bin
file and not for something like board-bus-device.bin like it does for pre-cal
data.
Due to this we have no way of providing correct BDF-s on the fly, so lets
extend the ath10k driver to first look for BDF-s in the board-bus-device.bin
format, for example: board-ahb-a800000.wifi.bin
If that fails, look for the default board file name as defined previously.

So, backport the upstream ath10k patch.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2 years agoath10k-ct: update to 2022-05-13
Robert Marko [Sat, 14 May 2022 18:14:14 +0000 (20:14 +0200)]
ath10k-ct: update to 2022-05-13

Update ath10k-ct to the latest version which includes the backported
ath10k commit for requesting API 1 BDF-s with a unique name like caldata.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2 years agotools/elfutils: drop HOST_BUILD_DEPENDS
Stijn Tintel [Wed, 18 May 2022 23:28:42 +0000 (02:28 +0300)]
tools/elfutils: drop HOST_BUILD_DEPENDS

This is only effective for host build of normal packages, not tools.

Fixes: ad79b9271949 ("elfutils: move host build to tools")
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agotools/elfutils: only build required components
Stijn Tintel [Wed, 18 May 2022 22:53:49 +0000 (01:53 +0300)]
tools/elfutils: only build required components

Building all of the components results in strip being installed in
staging_dir/host/bin. This strip binary will take precedence over
binutils strip that is installed in the toolchain directory.

This will not work on host systems that do not have libdw installed, as
we do not set HOST_LDFLAGS to override rpath to staging_dir/host/lib.
However, rather than overriding rpath, we should just avoid using
elfutils strip entirely.

Override the SUBDIRS variable in the Makefile to only build and install
the libraries we require for dwarves and frr.

Fixes the following build failure in toolchain/gdb:
strip: error while loading shared libraries: libdw.so.1: cannot open shared object file: No such file or directory

Fixes: ad79b9271949 ("elfutils: move host build to tools")
Reported-by: Dominick Grift <dominick.grift@defensec.nl>
Reported-by: Lucian Cristian <lucian.cristian@gmail.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agotools/elfutils: depend on m4
Stijn Tintel [Wed, 18 May 2022 13:15:09 +0000 (16:15 +0300)]
tools/elfutils: depend on m4

Some buildbots fail to build elfutils due to m4 being missing. Add m4 as
a dependency for elfutils to fix this.

Fixes: ad79b9271949 ("elfutils: move host build to tools")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agokernel: add KERNEL_BPF_EVENTS config option
Stijn Tintel [Sun, 20 Feb 2022 01:32:23 +0000 (03:32 +0200)]
kernel: add KERNEL_BPF_EVENTS config option

This is required to use BPF maps of type BPF_MAP_TYPE_PERF_EVENT_ARRAY
for sending data from BPF programs to user-space for post-processing
or logging.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agoconfig: limit CONFIG_DEBUG_INFO to top-level generic configs
Tony Ambardar [Sun, 20 Sep 2020 12:30:30 +0000 (05:30 -0700)]
config: limit CONFIG_DEBUG_INFO to top-level generic configs

Remove redundant target-level entries, noting that these settings will be
configured from "Kernel build options" of Kconfig.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[remove from new configs introduced after patch submission]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agobuild: add option KERNEL_DEBUG_INFO_BTF
Tony Ambardar [Sun, 26 Jul 2020 14:51:34 +0000 (07:51 -0700)]
build: add option KERNEL_DEBUG_INFO_BTF

Generate BTF (BPF Type Format) information from DWARF debug info. This is
embedded in the kernel and exported via sysfs as /sys/kernel/btf/vmlinux.
BTF data enhances kernel portability and introspection for BPF programs.

Selecting this also enables the dwarves host package which provides the
pahole tool used for BTF encoding.

Test using: "bpftool btf dump file /sys/kernel/btf/vmlinux format c"

This needs to depend on KERNEL_DEBUG_INFO_REDUCED not being set,
otherwise we can enable both KERNEL_DEBUG_INFO_BTF and
KERNEL_DEBUG_INFO_REDUCED, which will result in undefined behaviour.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[split DEBUG_INFO_REDUCED into separate commit, add dependency]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agokernel: add DEBUG_INFO_REDUCED config option
Stijn Tintel [Sun, 20 Feb 2022 01:09:55 +0000 (03:09 +0200)]
kernel: add DEBUG_INFO_REDUCED config option

Add DEBUG_INFO_REDUCED as a kernel config option and remove it from the
kernel configs. This is in preparation of the upcoming option to enable
BTF typeinfo, which is incompatible with DEBUG_INFO_REDUCED.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agolayerscape/armv8_64b: enable DEBUG_INFO_REDUCED
Stijn Tintel [Fri, 25 Feb 2022 12:09:20 +0000 (14:09 +0200)]
layerscape/armv8_64b: enable DEBUG_INFO_REDUCED

We currently enable DEBUG_INFO_REDUCED for all targets via the generic
kernel config. There is only one subtarget, layerscape/armv8_64b, that
overrides this setting. As there is no explanation for this in the
commit message that introduced this, and question to its author went
unanswered, let's simply drop this symbol from the subtarget config.
This way, we have consistency across the tree, and we do not have to
introduce a special case when moving this symbol to an OpenWrt kernel
config option.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agokernel: backport build fix for tools/resolve_btfids
Stijn Tintel [Tue, 29 Mar 2022 11:27:47 +0000 (14:27 +0300)]
kernel: backport build fix for tools/resolve_btfids

Building tools/resolve_btfids requires libelf and zlib. Without this
build fix, the kernel build system will not find these dependencies.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agotools/dwarves: add host package
Tony Ambardar [Tue, 24 Nov 2020 22:15:09 +0000 (14:15 -0800)]
tools/dwarves: add host package

dwarves is a set of tools that use the debugging information inserted in
ELF binaries by compilers such as GCC. Utilities in the dwarves suite
include pahole, which can be used to find alignment holes in structs and
classes, and also extracts other information such as CPU cacheline
alignment, helping pack those structures to achieve more cache hits.

These tools are also used to encode and read the BTF type information
format used with the bpf syscall, making this a Linux build dependency
when using kernel BTF information.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[bump to 1.23, add elfutils dep, drop host lib usage, drop cmake release
target, use RM macro]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agobuild: use KBUILD_HOSTLDFLAGS
Stijn Tintel [Tue, 29 Mar 2022 13:32:25 +0000 (16:32 +0300)]
build: use KBUILD_HOSTLDFLAGS

According to the GNU make manual, specifying library paths should be
done in LDFLAGS rather than LDLIBS. Replace KBUILD_HOSTLDLIBS with
KBUILD_HOSTLDFLAGS to pass the host lib directory.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agobuild: drop HOST_LOADLIBES
Stijn Tintel [Tue, 29 Mar 2022 13:28:21 +0000 (16:28 +0300)]
build: drop HOST_LOADLIBES

HOST_LOADLIBES was renamed to KBUILD_HOSTLDLIBS in kernel 4.19. As the
oldest kernel version we support is 5.10, cleanup HOST_LOADLIBES use.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agobpf-headers: drop HOST_LOADLIBES
Stijn Tintel [Tue, 29 Mar 2022 13:30:31 +0000 (16:30 +0300)]
bpf-headers: drop HOST_LOADLIBES

HOST_LOADLIBES was renamed to KBUILD_HOSTLDLIBS in kernel 4.19. As the
oldest kernel version we support is 5.10, cleanup HOST_LOADLIBES use.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agoelfutils: move host build to tools
Stijn Tintel [Mon, 28 Mar 2022 15:40:30 +0000 (18:40 +0300)]
elfutils: move host build to tools

The upcoming dwarves host package requires elfutils. As dependencies for
tools must exist in tools, we need to move elfutils host build there.

As there is at least one package that depends on this, and there is no
proper way to create such dependency in the build system, build it
unconditionally when not building on macOS.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agokernel: add missing dependency to KERNEL_RPI_AXIPERF
Stijn Tintel [Wed, 18 May 2022 10:31:05 +0000 (13:31 +0300)]
kernel: add missing dependency to KERNEL_RPI_AXIPERF

This symbol is added by the bcm27xx target patches so it should depend
on that target.

Fixes: efd9463dcfe2 ("kernel: add missing symbol for bcm27xx")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agokernel: add missing symbol for bcm27xx
Stijn Tintel [Tue, 17 May 2022 17:50:31 +0000 (20:50 +0300)]
kernel: add missing symbol for bcm27xx

When KERNEL_PERF_EVENTS is enabled in OpenWrt, the RPI_AXIPERF symbol is
exposed. Add a build option for it to fix build failures with
KERNEL_PERF_EVENTS enabled.

Fixes: 20ea6adbf199 ("bcm27xx: add support for linux v5.15")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agobcm27xx: add CPU_FREQ_GOV_SCHEDUTIL
John Audia [Tue, 17 May 2022 13:31:59 +0000 (15:31 +0200)]
bcm27xx: add CPU_FREQ_GOV_SCHEDUTIL

This is enabled upstream for bcm2709, bcm2710 and bcm2711.
https://github.com/raspberrypi/linux/blob/dff79e31c3b05a50f725442c1fc19a6194491523/arch/arm/configs/bcm2709_defconfig#L51
https://github.com/raspberrypi/linux/blob/dff79e31c3b05a50f725442c1fc19a6194491523/arch/arm/configs/bcm2711_defconfig#L51

Signed-off-by: John Audia <graysky@archlinux.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: remove linux 5.10 configs
Álvaro Fernández Rojas [Tue, 17 May 2022 13:22:13 +0000 (15:22 +0200)]
bcm27xx: remove linux 5.10 configs

Sorry, I missed these when removing linux v5.10 support...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: remove linux 5.10 compatibility
Álvaro Fernández Rojas [Tue, 17 May 2022 13:02:39 +0000 (15:02 +0200)]
bcm27xx: remove linux 5.10 compatibility

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: switch to 5.15
Álvaro Fernández Rojas [Tue, 17 May 2022 13:01:26 +0000 (15:01 +0200)]
bcm27xx: switch to 5.15

I tested it locally and I couldn't find any regressions, so let's give this a
wider test :).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx: add support for linux v5.15
Álvaro Fernández Rojas [Mon, 16 May 2022 21:40:32 +0000 (23:40 +0200)]
bcm27xx: add support for linux v5.15

Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B

Signed-off-by: Marty Jones <mj8263788@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx-gpu-fw: update to latest version
Álvaro Fernández Rojas [Tue, 17 May 2022 12:20:02 +0000 (14:20 +0200)]
bcm27xx-gpu-fw: update to latest version

Latest GPU FW contains multiple fixes and improvements.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm27xx-userland: update to latest version
Álvaro Fernández Rojas [Tue, 17 May 2022 12:56:28 +0000 (14:56 +0200)]
bcm27xx-userland: update to latest version

The latest version contains some fixes and additions.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agokernel: Add missing devm_regulator_get_exclusive()
Hauke Mehrtens [Mon, 16 May 2022 22:57:04 +0000 (00:57 +0200)]
kernel: Add missing devm_regulator_get_exclusive()

This backports a patch from Linux 5.10.116 to fix a compile problem
introduced in 5.10.114.

drivers/usb/phy/phy-generic.c could not find
devm_regulator_get_exclusive().

Fixes: 8592df67f40b ("kernel: bump 5.10 to 5.10.114")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 years agokernel: bump 5.15 to 5.15.40
John Audia [Sun, 15 May 2022 21:33:44 +0000 (17:33 -0400)]
kernel: bump 5.15 to 5.15.40

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
2 years agokernel: bump 5.15 to 5.15.39
John Audia [Thu, 12 May 2022 12:32:29 +0000 (08:32 -0400)]
kernel: bump 5.15 to 5.15.39

Removed upstreamed:
  backport-5.15/850-v5.17-0001-PCI-pci-bridge-emul-Add-description-for-class_revisi.patch
  backport-5.15/850-v5.17-0002-PCI-pci-bridge-emul-Add-definitions-for-missing-capa.patch
  backport-5.15/850-v5.17-0003-PCI-aardvark-Add-support-for-DEVCAP2-DEVCTL2-LNKCAP2.patch
  backport-5.15/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch
  backport-5.15/850-v5.17-0005-PCI-aardvark-Comment-actions-in-driver-remove-method.patch
  backport-5.15/850-v5.17-0006-PCI-aardvark-Disable-bus-mastering-when-unbinding-dr.patch
  backport-5.15/850-v5.17-0007-PCI-aardvark-Mask-all-interrupts-when-unbinding-driv.patch
  backport-5.15/850-v5.17-0008-PCI-aardvark-Fix-memory-leak-in-driver-unbind.patch
  backport-5.15/850-v5.17-0009-PCI-aardvark-Assert-PERST-when-unbinding-driver.patch
  backport-5.15/850-v5.17-0010-PCI-aardvark-Disable-link-training-when-unbinding-dr.patch
  backport-5.15/850-v5.17-0011-PCI-aardvark-Disable-common-PHY-when-unbinding-drive.patch
  pending-5.15/850-0001-PCI-aardvark-Replace-custom-PCIE_CORE_INT_-macros-wi.patch
  pending-5.15/850-0004-PCI-aardvark-Rewrite-IRQ-code-to-chained-IRQ-handler.patch
  pending-5.15/850-0005-PCI-aardvark-Check-return-value-of-generic_handle_do.patch
  pending-5.15/850-0006-PCI-aardvark-Make-MSI-irq_chip-structures-static-dri.patch
  pending-5.15/850-0007-PCI-aardvark-Make-msi_domain_info-structure-a-static.patch
  pending-5.15/850-0008-PCI-aardvark-Use-dev_fwnode-instead-of-of_node_to_fw.patch
  pending-5.15/850-0009-PCI-aardvark-Refactor-unmasking-summary-MSI-interrup.patch
  pending-5.15/850-0010-PCI-aardvark-Add-support-for-masking-MSI-interrupts.patch
  pending-5.15/850-0011-PCI-aardvark-Fix-setting-MSI-address.patc
  pending-5.15/850-0012-PCI-aardvark-Enable-MSI-X-support.patch
  pending-5.15/850-0013-PCI-aardvark-Add-support-for-ERR-interrupt-on-emulat.patch
  pending-5.15/850-0015-PCI-aardvark-Optimize-writing-PCI_EXP_RTCTL_PMEIE-an.patch
  pending-5.15/850-0016-PCI-aardvark-Add-support-for-PME-interrupts.patch
  pending-5.15/850-0017-PCI-aardvark-Fix-support-for-PME-requester-on-emulat.patch
  pending-5.15/850-0018-PCI-aardvark-Use-separate-INTA-interrupt-for-emulate.patch
  pending-5.15/850-0019-PCI-aardvark-Remove-irq_mask_ack-callback-for-INTx-i.patch
  pending-5.15/850-0020-PCI-aardvark-Don-t-mask-irq-when-mapping.patch
  pending-5.15/850-0021-PCI-aardvark-Drop-__maybe_unused-from-advk_pcie_disa.patch
  pending-5.15/850-0022-PCI-aardvark-Update-comment-about-link-going-down-af.patch

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200

Signed-off-by: John Audia <therealgraysky@proton.me>
2 years agokernel: bump 5.10 to 5.10.115
John Audia [Thu, 12 May 2022 17:04:51 +0000 (13:04 -0400)]
kernel: bump 5.10 to 5.10.115

Removed upstreamed:
  backport-5.10/850-v5.17-0004-PCI-aardvark-Clear-all-MSIs-at-setup.patch
  pending-5.10/850-0002-PCI-aardvark-Fix-reading-MSI-interrupt-number.patch

All other patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B

Signed-off-by: John Audia <therealgraysky@proton.me>
2 years agokernel: bump 5.10 to 5.10.114
John Audia [Mon, 9 May 2022 08:07:21 +0000 (04:07 -0400)]
kernel: bump 5.10 to 5.10.114

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B

Signed-off-by: John Audia <therealgraysky@proton.me>
2 years agoramips: Add support for SERCOMM NA502S
Andreas Böhler [Mon, 22 Mar 2021 00:01:44 +0000 (01:01 +0100)]
ramips: Add support for SERCOMM NA502S

The SERCOMM NA502s is a smart home gateway manufactured by SERCOMM and sold
under different brands (among others, A1 Telekom Austria SmartHome Premium
Gateway). It has multi-protocol radio support in addition to LAN and WiFi.

Note: BLE and audio are currently unsupported.

Specifications
--------------

  - MT7621ST 880MHz, Single-Core, Dual-Thread
  - MT7603EN 2.4GHz WiFi
  - MT7662EN 5GHz WiFi + BLE
  - 128MiB NAND
  - 256MiB DDR3 RAM
  - SD3503 ZWave Controller
  - EM357 Zigbee Coordinator
  - Telit UMTS module
  - Rechargeable battery
  - speaker and microphone

MAC address assignment
----------------------

LAN MAC is read from the config partition, WiFi 2.4GHz is LAN+2 and matches
the OEM firmware. WiFi 5GHz with LAN+1 is an educated guess since the
OEM firmware does not enable 5GHz WiFi.

Installation
------------
Attach serial console, then boot the initramfs image via TFTP.
Once inside OpenWrt, run sysupgrade -n with the sysupgrade file.

Attention: The device has a dual-firmware design. We overwrite kernel2,
since kernel1 contains an automatic recovery image.

If you get NAND ECC errors and are stuck with bad eraseblocks, try to
erase the mtd partition first with

mtd unlock ubi
mtd erase ubi

This should only be needed once.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
2 years agoramips: add led_source for Asus RT-AC1200 devices
Tamas Balogh [Sun, 1 May 2022 07:45:19 +0000 (09:45 +0200)]
ramips: add led_source for Asus RT-AC1200 devices

this adds the mediatek,led_source dts binding for
Asus RT-AC1200 devices' dtsi, for correct switch LED
behavior.

The dts-binding is introduced in commit:
65dc9e0980255b15402c45b840f239b85be59b3d

Without this, we only have constantly very fast
blinking LEDs, which don't react on any traffic or
LAN events at all.

Signed-off-by: Tamas Balogh <tamasbalogh@hotmail.com>
2 years agowolfssl: bump to v5.3.0-stable
Eneas U de Queiroz [Tue, 10 May 2022 19:39:11 +0000 (16:39 -0300)]
wolfssl: bump to v5.3.0-stable

This is mostly a bug fix release, including two that were already
patched here:
- 300-fix-SSL_get_verify_result-regression.patch
- 400-wolfcrypt-src-port-devcrypto-devcrypto_aes.c-remove-.patch

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2 years agoIPQ4019: AVM FRITZ!Box 7530: Remove NAND ECC restrictions from DTS
Andreas Böhler [Sun, 15 May 2022 08:50:31 +0000 (10:50 +0200)]
IPQ4019: AVM FRITZ!Box 7530: Remove NAND ECC restrictions from DTS

Some revisions of the FRITZ!7530 use a Toshiba NAND with 8 bit ECC in
contrast to the Macronix NAND with 4 bit ECC. This removes the hardcoded
ECC strength and step size as set in qcom-ipq4019.dtsi, thus relying on the
kernel NAND detection routines to correclty set up the ECC parameters.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
2 years agokernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash
Andreas Böhler [Tue, 12 Apr 2022 09:01:25 +0000 (11:01 +0200)]
kernel: add support for Toshiba TC58NVG0S3HTA00 NAND flash

The Toshiba TC58NVG0S3HTA00 is detected with 64 byte OOB while the flash
has 128 byte OOB. This adds a static NAND ID entry to correct this.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
2 years agoopenssl: bump to 1.1.1o
Eneas U de Queiroz [Tue, 10 May 2022 23:34:57 +0000 (20:34 -0300)]
openssl: bump to 1.1.1o

This release comes with a security fix related to c_rehash.  OpenWrt
does not ship or use it, so it was not affected by the bug.

There is a fix for a possible crash in ERR_load_strings() when
configured with no-err, which OpenWrt does by default.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2 years agoutil-linux: use meson to build
Rosen Penev [Sat, 30 Apr 2022 01:41:45 +0000 (18:41 -0700)]
util-linux: use meson to build

Compiles faster, is PIC by default, and does not have pkgconfig files
with wrong paths.

Add various fixes to it as it seems cross compilation was never tested.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2 years agoutil-linux: update to 2.38
Rosen Penev [Mon, 2 May 2022 03:58:33 +0000 (20:58 -0700)]
util-linux: update to 2.38

Various fixes.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2 years agoath79: ZTE MF286[A,R]: add "Power button blocker" GPIO switch
Lech Perczak [Sat, 14 May 2022 12:50:02 +0000 (14:50 +0200)]
ath79: ZTE MF286[A,R]: add "Power button blocker" GPIO switch

ZTE MF286A and MF286R feature a "power switch override" GPIO in stock
firmware as means to prevent power interruption during firmware update,
especially when used with internal battery.
To ensure that this GPIO is
properly driven as in stock firmware, configure it with userspace GPIO
switch.

It was observed that on some units, the modem would not be
restarted together with the board itself on reboot, this should help
with that as well.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2 years agoipq40xx: revert Cell-C RTL30VW to legacy caldata extraction
Pawel Dembicki [Wed, 11 May 2022 15:29:21 +0000 (17:29 +0200)]
ipq40xx: revert Cell-C RTL30VW to legacy caldata extraction

This partially reverts
commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data").

After switching to nvmem RTL30VW, wifi was broken:

[   19.118319] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   19.118377] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   19.130285] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   19.159092] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=cellc,rtl30vw from ath10k/QCA4019/hw1.0/board-2.bin
[   19.238764] ath10k_ahb a000000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[   19.238847] ath10k_ahb a000000.wifi: failed to fetch board file: -12
[   19.247362] ath10k_ahb a000000.wifi: could not probe fw (-12)
[   20.190797] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   20.190853] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   20.202893] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   20.231357] ath10k_ahb a800000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=cellc,rtl30vw from ath10k/QCA4019/hw1.0/board-2.bin
[   20.317318] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[   20.317399] ath10k_ahb a800000.wifi: failed to fetch board file: -12
[   20.326098] ath10k_ahb a800000.wifi: could not probe fw (-12)

Bootloader mangles in NAND partitions and removes precal@X nodes in
working system:

root@OpenWrt:~# echo $(cat /sys/firmware/devicetree/base/soc/spi@78b5000/flash@0/partitions/partition@170000/label)
0:ART
root@OpenWrt:~# ls /sys/firmware/devicetree/base/soc/spi@78b5000/flash@0/partitions/partition@170000/
label  name   reg

Revert to legacy method fixed the problem.

Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2 years agoath79: fix I2C on GL-AR300M devices
Ptilopsis Leucotis [Wed, 11 May 2022 16:55:05 +0000 (19:55 +0300)]
ath79: fix I2C on GL-AR300M devices

On GL-AR300M Series GPIO17 described as I2C SDA in Device Tree.
Because of GPIO_OUT_FUNCTION4 register was not initialized on start,
GPIO17 was uncontrollable, it always in high state. According to QCA9531
documentation, default setting of GPIO17 is SYS_RST_L. In order to make
GPIO17 controllable, it should write value 0x00 on bits [15:8] of
GPIO_OUT_FUNCTION4 register, located at 0x1804003C address.

Signed-off-by: Ptilopsis Leucotis <PtilopsisLeucotis@yandex.com>
2 years agolibubox: update to the latest version
Felix Fietkau [Sun, 15 May 2022 13:19:49 +0000 (15:19 +0200)]
libubox: update to the latest version

f2d6752901f2 blob: clear buf->head when freeing a buffer
45210ce14136 list.h: add container_of_safe macro
cfa372ff8aed blobmsg: implicitly reserve space for 0-terminator in string buf alloc
d2223ef9da71 blobmsg: work around false positive gcc -Warray-bounds warnings

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agompc85xx: enable error reporting for RAM and PCIe
Josef Schlehofer [Fri, 6 May 2022 17:13:05 +0000 (19:13 +0200)]
mpc85xx: enable error reporting for RAM and PCIe

All Freescale processors used in this target are capable to detect error
and correction. [1] It can not be used as kernel module. [2] This is
helpful to report hardware errors.

It enables three kernel options:

- EDAC, which is a subsystem
- EDAC_LEGACY_SYSFS, it enables sysfq nodes
- MP85XX, support for Freescale MPC8349, MPC8560, MPC8540, MPC8548, T4240

EDAC is already enabled for following targets:
qoriq, octeon, octeontx and zynq.

[1] https://cateee.net/lkddb/web-lkddb/EDAC.html
[2] https://patchwork.ozlabs.org/patch/554908/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2 years agouboot-fritz4040: Add support for Toshiba NAND
Christian Lamparter [Fri, 13 May 2022 19:44:30 +0000 (21:44 +0200)]
uboot-fritz4040: Add support for Toshiba NAND

From Andreas Böhler:

"Some revisions of the FRITZ!7530 use a Toshiba NAND with 8 bit ECC
in contrast to the Macronix NAND with 4 bit ECC.".

Uboot needs to know this in order to have a chance to load from
the NAND.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2 years agoipq-wifi: drop upstreamed board-2.bin
Christian Lamparter [Fri, 13 May 2022 20:25:36 +0000 (22:25 +0200)]
ipq-wifi: drop upstreamed board-2.bin

The BDFs for the:
Aruba AP-303
ASUS RT-AC42U
AVM FRITZ!Repeater 1200
Buffalo WTR-M2133HP
Cell C RTL30VW
D-Link DAP-2610
EnGenius EAP2200
EnGenius EMD1
EnGenius EMR3500
EnGenius EMR5000
EZVIZ CS-W3-WD1200G EUP
Google Wifi
Linksys MR8300 V1.0
Luma WRTQ-329ACN
MobiPromo CM520-79F
NEC Platforms WG2600HP3
Plasma Cloud PA1200 (updated version)
Plasma Cloud PA2200
ZTE MF286D

were upstreamed to the ath10k-firmware repository
and landed in linux-firmware.git.

Furthermore the BDFs for the:
8devices Habanero
OpenMesh A62
OpenMesh A42
AVM FRITZ!Box 4040

have been updated.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2 years agolinux-firmware: take linux-firmware.git's qca99x0 boardfile
Christian Lamparter [Fri, 13 May 2022 20:07:59 +0000 (22:07 +0200)]
linux-firmware: take linux-firmware.git's qca99x0 boardfile

Kalle Valo managed to add the qca9980's boardfile in the
upstream repository. Sourcing the file from his repository
is no longer needed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2 years agolinux-firmware: Update to version 20220509
Christian Lamparter [Fri, 13 May 2022 19:55:46 +0000 (21:55 +0200)]
linux-firmware: Update to version 20220509

git log --pretty=oneline --abbrev-commit 20220411..20220509 (sorted)

amdgpu:
480d6c2 amdgpu: update dcn_3_1_6_dmcub firmware
b4994be amdgpu: update gc_10_3_7_rlc firmware
61eb408 amdgpu: update psp_13_0_8 firmware
fcf9d8c amdgpu: update yellow carp DMCUB firmware

ath10k:
73743b8 ath10k: QCA4019 hw1.0: update board-2.bin
6ad0930 ath10k: QCA6174 hw3.0: update board-2.bin
729bd7f ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00288-QCARMSWPZ-1
9fce09f ath10k: QCA9888 hw2.0: update board-2.bin
b155d85 ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00156
44b8aee ath10k: QCA9984 hw1.0: update board-2.bin
4ad3bd3 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00156
1962cba ath10k: QCA99X0 hw2.0: add board-2.bin

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2 years agoipq40xx: Lyra: update RGB LED-Controller node for 5.10+
Christian Lamparter [Sat, 7 May 2022 17:41:55 +0000 (19:41 +0200)]
ipq40xx: Lyra: update RGB LED-Controller node for 5.10+

Add the reg and color property to each channel node. This
update is to accommodate the multicolor framework.

Refer to:
<https://lore.kernel.org/all/20200622185919.2131-9-dmurphy@ti.com>
<https://lore.kernel.org/all/20210818070209.1540451-1-michal.vokac@ysoft.com>

Note:

There is only a single extremely bright RGB-LED.
The RGB-color channels (i.e.: blue-0, blue-1 and blue-2)
are running in parallel to increase the current delivery
beyond what a single PWM-output on the LED controller
could do.

BugLink: https://github.com/openwrt/openwrt/issues/9851
Reported-By: Thomas Bøge <thomas@boegenielsen.dk>
Tested-By: Thomas Bøge <thomas@boegenielsen.dk>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2 years agoapm821xx: use nested fixed-partitions
Christian Lamparter [Sat, 14 May 2022 08:44:58 +0000 (10:44 +0200)]
apm821xx: use nested fixed-partitions

This makes it possible to fix Netgear WNDAP620+660 DTS ugliness.
Bring back the dtb and firmware partitions for the WNDR4700.
Thank you, mans0n.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2 years agobcm53xx: remove MR32's specific get_leds_dt code
Christian Lamparter [Wed, 9 Mar 2022 19:20:20 +0000 (20:20 +0100)]
bcm53xx: remove MR32's specific get_leds_dt code

the existing diag.sh code will pick up the LED
by itself. This is not/no longer needed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>