nodogsplash/files/nodogsplash.config

   1 config instance
   2   # Set to 1 to enable nodogsplash
   3   option enabled 0
   4
   5   # Use plain configuration file as well
   6   #option config '/etc/nodogsplash/nodogsplash.conf'
   7   option network 'lan'
   8   option gatewayname 'OpenWrt Nodogsplash'
   9   option maxclients '250'
  10   option idletimeout '1200'
  11
  12   # Your router may have several interfaces, and you
  13   # probably want to keep them private from the network/gatewayinterface.
  14   # If so, you should block the entire subnets on those interfaces, e.g.:
  15   list authenticated_users 'block to 192.168.0.0/16'
  16   list authenticated_users 'block to 10.0.0.0/8'
  17
  18   # Typical ports you will probably want to open up.
  19   list authenticated_users 'allow tcp port 22'
  20   list authenticated_users 'allow tcp port 53'
  21   list authenticated_users 'allow udp port 53'
  22   list authenticated_users 'allow tcp port 80'
  23   list authenticated_users 'allow tcp port 443'
  24
  25   # For preauthenticated users to resolve IP addresses in their
  26   # initial request not using the router itself as a DNS server,
  27   list preauthenticated_users 'allow tcp port 53'
  28   list preauthenticated_users 'allow udp port 53'
  29
  30   # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
  31   list users_to_router 'allow tcp port 22'
  32   list users_to_router 'allow tcp port 23'
  33   list users_to_router 'allow tcp port 53'
  34   list users_to_router 'allow udp port 53'
  35   list users_to_router 'allow udp port 67'
  36   list users_to_router 'allow tcp port 80'
  37   list users_to_router 'allow tcp port 443'
  38
  39   # See https://github.com/nodogsplash for a full list of available options.