luci-app-olsrd2: upgrade uci-defaults for ucitrack handling to use json

[feed/routing.git] / alfred / files / alfred.init

diff --git a/alfred/files/alfred.init b/alfred/files/alfred.init
index 4c9a9e195ada75d8f7b9d42e2b852cc855552bfb..f191827fd0af2977a9b9cbd2fa7ce0c8ead4f9e5 100755 (executable)
--- a/alfred/files/alfred.init
+++ b/alfred/files/alfred.init
@@ -1,81 +1,41 @@
 #!/bin/sh /etc/rc.common
 
-#
-# Copyright (C) 2013 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 START=99
-STOP=99
+USE_PROCD=1
 alfred_args=""
 vis_args=""
 facters_dir="/etc/alfred"
-pid_file_alfred="/var/run/alfred.pid"
-pid_file_vis="/var/run/batadv-vis.pid"
 enable=0
 vis_enable=0
-SERVICE_DAEMONIZE=1
-SERVICE_WRITE_PID=1
-
-wait_for_dir()
-{
-       local ifce="$1" dir="$2"
-
-       if ! [ -d "$dir" ] ; then
-               timeout=30
-               echo "${initscript}: waiting $timeout secs for $ifce interface..."
-               for i in $(seq $timeout); do
-                       sleep 1
-                       [ -d "$dir" ] && break
-                       if [ $i == $timeout ] ; then
-                               echo "${initscript}: $ifce not detected, alfred not starting."
-                               exit 1
-                       fi
-               done
-       fi
-}
 
-wait_for_ll_address()
+append_interface()
 {
-       local iface="$1"
-       local timeout=30
-
-       echo "${initscript}: waiting $timeout secs for $iface address..."
-       for i in $(seq $timeout); do
-               # We look for
-               # - the link-local address (starts with fe80)
-               # - without tentative flag (bit 0x40 in the flags field; the first char of the flags field begins 38 columns after the fe80 prefix
-               # - on interface $iface
-               if awk '
-                       BEGIN { RET=1 }
-                       /^fe80.{37} [012389ab]/ { if ($6 == "'"$iface"'") RET=0 }
-                       END { exit RET }
-               ' /proc/net/if_inet6; then
-                       return
-               fi
-               sleep 1
-       done
-
-       echo "${initscript}: $iface address not detected, alfred not starting."
-       exit 1
+       append "interfaces" "$1" ","
 }
 
-alfred_start()
-{
+alfred_start() {
        local args=""
        local section="$1"
        local disabled interface mode
+       local interfaces
 
        # check if section is disabled
        config_get_bool disabled "$section" disabled 0
        [ $disabled = 0 ] || return 1
 
-       args=""
+       args="-f"
 
-       config_get interface "$section" interface
-       append args "-i $interface"
+       config_list_foreach "$section" "interface" append_interface
+       if [ -z "$interfaces" ]; then
+               config_get interface "$section" interface
+               append_interface "$interface"
+       fi
+       append args "-i $interfaces"
 
        config_get mode "$section" mode
        [ "$mode" = "master" ] && append args "-m"
@@ -83,12 +43,6 @@ alfred_start()
        config_get batmanif "$section" batmanif
        append args "-b $batmanif"
 
-       if [ "$batmanif" != "none" ]; then
-               wait_for_dir "$batmanif" "/sys/class/net/$batmanif/mesh"
-       fi
-
-       wait_for_ll_address "$interface"
-
        append alfred_args "$args"
        enable=1
 
@@ -103,41 +57,41 @@ alfred_start()
        return 0
 }
 
-start()
-{
+start_service() {
        config_load "alfred"
        config_foreach alfred_start alfred
 
-       if [ "$enable" = "0" ]; then
-               exit 0
-       fi
+       [ "$enable" = "0" ] && return 0
 
-       echo "${initscript}: starting alfred"
-       SERVICE_PID_FILE="$pid_file_alfred"
-       service_start /usr/sbin/alfred ${alfred_args}
+       procd_open_instance "alfred"
+       procd_set_param command /usr/sbin/alfred
+       procd_append_param command ${alfred_args}
+       procd_close_instance
 
-       if [ "$vis_enable" = "1" ]; then
-               echo "${initscript}: starting batadv-vis"
-               SERVICE_PID_FILE="$pid_file_vis"
-               service_start /usr/sbin/batadv-vis ${vis_args}
-       fi
+       [ "$vis_enable" = "1" ] && {
+               procd_open_instance "batadv-vis"
+               procd_set_param command /usr/sbin/batadv-vis
+               procd_append_param command ${vis_args}
+               procd_close_instance
+       }
 
-       if [ "$run_facters" = "1" ]; then
+       [ "$run_facters" = "1" ] && {
                ( for file in $facters_dir/* ; do [ -x $file ] && $file ; done )
                if ! ( grep -q "for file in $facters_dir/\* ; do " /etc/crontabs/root 2>/dev/null ) ; then
                        echo "*/5 * * * * ( for file in $facters_dir/* ; do [ -x \$file ] && \$file ; done )" >> /etc/crontabs/root
                        /etc/init.d/cron enable
                        /etc/init.d/cron restart
                fi
-       fi
+       }
 }
 
-stop()
-{
-       SERVICE_PID_FILE="$pid_file_alfred"
-       service_stop /usr/sbin/alfred
-       SERVICE_PID_FILE="$pid_file_vis"
-       [ -x /usr/sbin/batadv-vis ] && service_stop /usr/sbin/batadv-vis
-       sed "\|for file in $facters_dir/\* ; do |d" -i /etc/crontabs/root
-       /etc/init.d/cron restart
+service_triggers() {
+       procd_add_reload_trigger "alfred"
+}
+
+stop_service() {
+       [ -e /etc/crontabs/root ] && {
+               sed "\|for file in $facters_dir/\* ; do |d" -i /etc/crontabs/root
+               /etc/init.d/cron restart
+       }
 }