config KERNEL_BUILD_USER
string "Custom Kernel Build User Name"
+ default "builder" if BUILDBOT
default ""
help
Sets the Kernel build user string, which for example will be returned
config KERNEL_BUILD_DOMAIN
string "Custom Kernel Build Domain Name"
+ default "buildhost" if BUILDBOT
default ""
help
Sets the Kernel build domain string, which for example will be
default n
depends on (arm || aarch64)
+config KERNEL_X86_VSYSCALL_EMULATION
+ bool "Enable vsyscall emulation"
+ default n
+ depends on x86_64
+ help
+ This enables emulation of the legacy vsyscall page. Disabling
+ it is roughly equivalent to booting with vsyscall=none, except
+ that it will also disable the helpful warning if a program
+ tries to use a vsyscall. With this option set to N, offending
+ programs will just segfault, citing addresses of the form
+ 0xffffffffff600?00.
+
+ This option is required by many programs built before 2013, and
+ care should be used even with newer programs if set to N.
+
+ Disabling this option saves about 7K of kernel size and
+ possibly 4K of additional runtime pagetable memory.
+
config KERNEL_PERF_EVENTS
bool "Compile the kernel with performance events and counters"
default n
bool
default y if KERNEL_KPROBES
+config KERNEL_KPROBE_EVENTS
+ bool
+ default y if KERNEL_KPROBES
+
config KERNEL_AIO
bool "Compile the kernel with asynchronous IO support"
- default n
+ default y if !SMALL_FLASH
config KERNEL_FHANDLE
bool "Compile the kernel with support for fhandle syscalls"
- default n
+ default y if !SMALL_FLASH
config KERNEL_FANOTIFY
bool "Compile the kernel with modern file notification support"
- default n
+ default y if !SMALL_FLASH
config KERNEL_BLK_DEV_BSG
bool "Compile the kernel with SCSI generic v4 support for any block device"
config KERNEL_CGROUPS
bool "Enable kernel cgroups"
- default n
+ default y if !SMALL_FLASH
if KERNEL_CGROUPS
config KERNEL_CPUSETS
bool "Cpuset support"
- default n
+ default y if !SMALL_FLASH
help
This option will let you create and manage CPUSETs which
allow dynamically partitioning a system into sets of CPUs and
config KERNEL_CGROUP_CPUACCT
bool "Simple CPU accounting cgroup subsystem"
- default n
+ default y if !SMALL_FLASH
help
Provides a simple Resource Controller for monitoring the
total CPU consumed by the tasks in a cgroup.
config KERNEL_RESOURCE_COUNTERS
bool "Resource counters"
- default n
+ default y if !SMALL_FLASH
help
This option enables controller independent resource accounting
infrastructure that works with cgroups.
config KERNEL_MEMCG
bool "Memory Resource Controller for Control Groups"
- default n
+ default y if !SMALL_FLASH
depends on KERNEL_RESOURCE_COUNTERS || !LINUX_3_18
help
Provides a memory resource controller that manages both anonymous
config KERNEL_MEMCG_KMEM
bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)"
- default n
+ default y if !SMALL_FLASH
depends on KERNEL_MEMCG
help
The Kernel Memory extension for Memory Resource Controller can limit
menuconfig KERNEL_CGROUP_SCHED
bool "Group CPU scheduler"
- default n
+ default y if !SMALL_FLASH
help
This feature lets CPU scheduler recognize task groups and control CPU
bandwidth allocation to such task groups. It uses cgroups to group
config KERNEL_FAIR_GROUP_SCHED
bool "Group scheduling for SCHED_OTHER"
- default n
+ default y if !SMALL_FLASH
config KERNEL_CFS_BANDWIDTH
bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
config KERNEL_RT_GROUP_SCHED
bool "Group scheduling for SCHED_RR/FIFO"
- default n
+ default y if !SMALL_FLASH
help
This feature lets you explicitly allocate real CPU bandwidth
to task groups. If enabled, it will also make it impossible to
CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
CONFIG_BLK_DEV_THROTTLING=y.
+ if KERNEL_BLK_CGROUP
+
+ config KERNEL_CFQ_GROUP_IOSCHED
+ bool "Proportional weight of disk bandwidth in CFQ"
+
+ config KERNEL_BLK_DEV_THROTTLING
+ bool "Enable throttling policy"
+ default y if TARGET_brcm2708
+
+ config KERNEL_BLK_DEV_THROTTLING_LOW
+ bool "Block throttling .low limit interface support (EXPERIMENTAL)"
+ depends on KERNEL_BLK_DEV_THROTTLING
+ endif
+
config KERNEL_DEBUG_BLK_CGROUP
bool "Enable Block IO controller debugging"
default n
config KERNEL_NAMESPACES
bool "Enable kernel namespaces"
- default n
+ default y if !SMALL_FLASH
if KERNEL_NAMESPACES
endif
-#
-# LXC related symbols
-#
-
-config KERNEL_LXC_MISC
- bool "Enable miscellaneous LXC related options"
- default n
-
-if KERNEL_LXC_MISC
-
- config KERNEL_DEVPTS_MULTIPLE_INSTANCES
- bool "Support multiple instances of devpts"
- default y
- help
- Enable support for multiple instances of devpts filesystem.
- If you want to have isolated PTY namespaces (eg: in containers),
- say Y here. Otherwise, say N. If enabled, each mount of devpts
- filesystem with the '-o newinstance' option will create an
- independent PTY namespace.
-
- config KERNEL_POSIX_MQUEUE
- bool "POSIX Message Queues"
- default y
- help
- POSIX variant of message queues is a part of IPC. In POSIX message
- queues every message has a priority which decides about succession
- of receiving it by a process. If you want to compile and run
- programs written e.g. for Solaris with use of its POSIX message
- queues (functions mq_*) say Y here.
+config KERNEL_DEVPTS_MULTIPLE_INSTANCES
+ bool "Support multiple instances of devpts"
+ default y if !SMALL_FLASH
+ help
+ Enable support for multiple instances of devpts filesystem.
+ If you want to have isolated PTY namespaces (eg: in containers),
+ say Y here. Otherwise, say N. If enabled, each mount of devpts
+ filesystem with the '-o newinstance' option will create an
+ independent PTY namespace.
+
+config KERNEL_POSIX_MQUEUE
+ bool "POSIX Message Queues"
+ default y if !SMALL_FLASH
+ help
+ POSIX variant of message queues is a part of IPC. In POSIX message
+ queues every message has a priority which decides about succession
+ of receiving it by a process. If you want to compile and run
+ programs written e.g. for Solaris with use of its POSIX message
+ queues (functions mq_*) say Y here.
- POSIX message queues are visible as a filesystem called 'mqueue'
- and can be mounted somewhere if you want to do filesystem
- operations on message queues.
+ POSIX message queues are visible as a filesystem called 'mqueue'
+ and can be mounted somewhere if you want to do filesystem
+ operations on message queues.
-endif
config KERNEL_SECCOMP_FILTER
bool
- default n
+ default y if !SMALL_FLASH
config KERNEL_SECCOMP
bool "Enable seccomp support"
depends on !(TARGET_uml)
select KERNEL_SECCOMP_FILTER
- default n
+ default y if !SMALL_FLASH
help
Build kernel with support for seccomp.
projects / openwrt / openwrt.git / blobdiff