+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Sat, 27 Mar 2021 17:43:25 -0300
+Subject: openssl.cnf: add engine configuration
+
+This adds configuration options for engines, loading all cnf files under
+/etc/ssl/engines.cnf.d/.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+
--- a/apps/openssl.cnf
+++ b/apps/openssl.cnf
-@@ -22,6 +22,99 @@ oid_section = new_oids
+@@ -30,6 +30,16 @@ oid_section = new_oids
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)
+engines=engines
+
+[engines]
-+# To enable an engine, install the package, and uncomment it here:
-+#devcrypto=devcrypto
-+#afalg=afalg
-+#padlock=padlock
-+##gost=gost
++.include /var/etc/ssl/engines.cnf
+
-+[afalg]
-+# Leave this alone and configure algorithms with CIPERS/DIGESTS below
-+default_algorithms = ALL
-+
-+# The following commands are only available if using the alternative
-+# (sync) AFALG engine
-+# Configuration commands:
-+# Run 'openssl engine -t -c -vv -pre DUMP_INFO devcrypto' to see a
-+# list of supported algorithms, along with their driver, whether they
-+# are hw accelerated or not, and the engine's configuration commands.
-+
-+# USE_SOFTDRIVERS: specifies whether to use software (not accelerated)
-+# drivers (0=use only accelerated drivers, 1=allow all drivers, 2=use
-+# if acceleration can't be determined) [default=2]
-+#USE_SOFTDRIVERS = 2
-+
-+# CIPHERS: either ALL, NONE, NO_ECB (all except ECB-mode) or a
-+# comma-separated list of ciphers to enable [default=NO_ECB]
-+# Starting in 1.2.0, if you use a cipher list, each cipher may be
-+# followed by a colon (:) and the minimum request length to use
-+# AF_ALG drivers for that cipher; smaller requests are processed by
-+# softare; a negative value will use the default for that cipher
-+#CIPHERS=AES-128-CBC:1024, AES-256-CBC:768, DES-EDE3-CBC:0
-+
-+# DIGESTS: either ALL, NONE, or a comma-separated list of digests to
-+# enable [default=NONE]
-+# It is strongly recommended not to enable digests; their performance
-+# is poor, and there are many cases in which they will not work,
-+# especially when calling fork with open crypto contexts. Openssh,
-+# for example, does this, and you may not be able to login.
-+#DIGESTS = NONE
-+
-+[devcrypto]
-+# Leave this alone and configure algorithms with CIPERS/DIGESTS below
-+default_algorithms = ALL
-+
-+# Configuration commands:
-+# Run 'openssl engine -t -c -vv -pre DUMP_INFO devcrypto' to see a
-+# list of supported algorithms, along with their driver, whether they
-+# are hw accelerated or not, and the engine's configuration commands.
-+
-+# USE_SOFTDRIVERS: specifies whether to use software (not accelerated)
-+# drivers (0=use only accelerated drivers, 1=allow all drivers, 2=use
-+# if acceleration can't be determined) [default=2]
-+#USE_SOFTDRIVERS = 2
-+
-+# CIPHERS: either ALL, NONE, or a comma-separated list of ciphers to
-+# enable [default=ALL]
-+# It is recommended to disable the ECB ciphers; in most cases, it will
-+# only be used for PRNG, in small blocks, where performance is poor,
-+# and there may be problems with apps forking with open crypto
-+# contexts, leading to failures. The CBC ciphers work well:
-+#CIPHERS=DES-CBC, DES-EDE3-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
-+
-+# DIGESTS: either ALL, NONE, or a comma-separated list of digests to
-+# enable [default=NONE]
-+# It is strongly recommended not to enable digests; their performance
-+# is poor, and there are many cases in which they will not work,
-+# especially when calling fork with open crypto contexts. Openssh,
-+# for example, does this, and you may not be able to login.
-+#DIGESTS = NONE
-+
-+[padlock]
-+default_algorithms = ALL
-+
-+[gost]
-+default_algorithms = ALL
-+# CRYPT_PARAMS: OID of default GOST 28147-89 parameters It allows the
-+# user to choose between different parameter sets of symmetric cipher
-+# algorithm. RFC 4357 specifies several parameters for the
-+# GOST 28147-89 algorithm, but OpenSSL doesn't provide user interface
-+# to choose one when encrypting. So use engine configuration parameter
-+# instead.
-+# Value of this parameter can be either short name, defined in OpenSSL
-+# obj_dat.h header file or numeric representation of OID, defined in
-+# RFC 4357. Defaults to id-tc26-gost-28147-param-Z
-+#CRYPT_PARAMS = id-tc26-gost-28147-param-Z
-+
-+# PBE_PARAMS: Shortname of default digest alg for PBE
-+#PBE_PARAMS =
++.include /etc/ssl/engines.cnf.d
+
[ new_oids ]
-
# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+ # Add a simple OID like this:
projects / openwrt / openwrt.git / blobdiff