}
hostapd_append_wpa_key_mgmt() {
- local auth_type="$(echo $auth_type | tr 'a-z' 'A-Z')"
+ local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')"
- append wpa_key_mgmt "WPA-$auth_type"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type}"
- [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type}-SHA256"
+ case "$auth_type" in
+ psk|eap)
+ append wpa_key_mgmt "WPA-$auth_type_l"
+ [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}"
+ [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
+ ;;
+ eap192)
+ append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+ ;;
+ eap-eap192)
+ append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
+ append wpa_key_mgmt "WPA-EAP"
+ [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+ [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
+ ;;
+ sae)
+ append wpa_key_mgmt "SAE"
+ [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
+ ;;
+ psk-sae)
+ append wpa_key_mgmt "WPA-PSK"
+ [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
+ [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256"
+ append wpa_key_mgmt "SAE"
+ [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
+ ;;
+ owe)
+ append wpa_key_mgmt "OWE"
+ ;;
+ esac
}
hostapd_add_log_config() {
config_add_string country
config_add_boolean country_ie doth
+ config_add_boolean spectrum_mgmt_required
+ config_add_int local_pwr_constraint
config_add_string require_mode
config_add_boolean legacy_rates
+ config_add_string acs_chan_bias
+ config_add_array hostapd_options
+
hostapd_add_log_config
}
local base="${config%%.conf}"
local base_cfg=
- json_get_vars country country_ie beacon_int doth require_mode legacy_rates
+ json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+ acs_chan_bias local_pwr_constraint spectrum_mgmt_required
hostapd_set_log_options base_cfg
set_default country_ie 1
+ set_default spectrum_mgmt_required 0
set_default doth 1
set_default legacy_rates 1
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
- [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
+ [ "$country_ie" -gt 0 ] && {
+ append base_cfg "ieee80211d=1" "$N"
+ [ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
+ [ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
+ }
[ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
}
+ [ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
+
local brlist= br
json_get_values basic_rate_list basic_rate
local rlist= r
[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
- [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
+ append base_cfg "beacon_int=$beacon_int" "$N"
+ append base_cfg "dtim_period=$dtim_period" "$N"
+
+ json_get_values opts hostapd_options
+ for val in $opts; do
+ append base_cfg "$val" "$N"
+ done
cat > "$config" <<EOF
driver=$driver
hostapd_common_add_bss_config() {
config_add_string 'bssid:macaddr' 'ssid:string'
- config_add_boolean wds wmm uapsd hidden
+ config_add_boolean wds wmm uapsd hidden utf8_ssid
config_add_int maxassoc max_inactivity
config_add_boolean disassoc_low_ack isolate short_preamble
config_add_int \
wep_rekey eap_reauth_period \
wpa_group_rekey wpa_pair_rekey wpa_master_rekey
+ config_add_boolean wpa_disable_eapol_key_retries
+
+ config_add_boolean tdls_prohibit
config_add_boolean rsn_preauth auth_cache
config_add_int ieee80211w
config_add_string acct_server
config_add_string acct_secret
config_add_int acct_port
+ config_add_int acct_interval
config_add_string dae_client
config_add_string dae_secret
config_add_string nasid
config_add_string ownip
+ config_add_string radius_client_addr
config_add_string iapp_interface
config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
+ config_add_string subject_match subject_match2
+ config_add_array altsubject_match altsubject_match2
+ config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
+ config_add_string ieee80211w_mgmt_cipher
config_add_int dynamic_vlan vlan_naming
config_add_string vlan_tagged_interface vlan_bridge
config_add_string wpa_psk_file
+ config_add_int multi_ap
+
config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
config_add_int wps_ap_setup_locked wps_independent
config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
+ config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
+
+ config_add_boolean ieee80211v wnm_sleep_mode bss_transition
+ config_add_int time_advertisement
+ config_add_string time_zone
+
+ config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report
- config_add_boolean ieee80211r pmk_r1_push
+ config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
config_add_int r0_key_lifetime reassociation_deadline
config_add_string mobility_domain r1_key_holder
config_add_array r0kh r1kh
config_add_int mcast_rate
config_add_array basic_rate
config_add_array supported_rates
+
+ config_add_boolean sae_require_mfp
+
+ config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
}
hostapd_set_bss_options() {
wireless_vif_parse_encryption
- local bss_conf
+ local bss_conf bss_md5sum
local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
json_get_vars \
wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
+ wpa_disable_eapol_key_retries tdls_prohibit \
maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
- macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
- iapp_interface eapol_version acct_server acct_secret acct_port \
- dynamic_vlan ieee80211w
+ macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
+ iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
+ acct_server acct_secret acct_port acct_interval \
+ bss_load_update_period chan_util_avg_period sae_require_mfp \
+ multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key
set_default isolate 0
set_default maxassoc 0
set_default hidden 0
set_default wmm 1
set_default uapsd 1
+ set_default wpa_disable_eapol_key_retries 0
+ set_default tdls_prohibit 0
set_default eapol_version 0
set_default acct_port 1813
+ set_default bss_load_update_period 60
+ set_default chan_util_avg_period 600
+ set_default utf8_ssid 1
+ set_default multi_ap 0
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
fi
+ append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
+ append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
append bss_conf "preamble=$short_preamble" "$N"
append bss_conf "wmm_enabled=$wmm" "$N"
append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
+ append bss_conf "utf8_ssid=$utf8_ssid" "$N"
+ append bss_conf "multi_ap=$multi_ap" "$N"
+
+ [ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
[ "$wpa" -gt 0 ] && {
[ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
}
+ [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
[ -n "$acct_server" ] && {
append bss_conf "acct_server_addr=$acct_server" "$N"
append bss_conf "acct_server_port=$acct_port" "$N"
[ -n "$acct_secret" ] && \
append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+ [ -n "$acct_interval" ] && \
+ append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
}
+ case "$auth_type" in
+ sae|owe|eap192|eap-eap192)
+ set_default ieee80211w 2
+ set_default sae_require_mfp 1
+ ;;
+ psk-sae)
+ set_default ieee80211w 1
+ set_default sae_require_mfp 1
+ ;;
+ esac
+ [ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
+
local vlan_possible=""
case "$auth_type" in
- none)
+ none|owe)
+ json_get_vars owe_transition_bssid owe_transition_ssid
+
+ [ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N"
+ [ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N"
+
wps_possible=1
# Here we make the assumption that if we're in open mode
# with WPS enabled, we got to be in unconfigured state.
wps_not_configured=1
;;
- psk)
+ psk|sae|psk-sae)
json_get_vars key wpa_psk_file
if [ ${#key} -lt 8 ]; then
wireless_setup_vif_failed INVALID_WPA_PSK
wps_possible=1
;;
- eap)
+ eap|eap192|eap-eap192)
json_get_vars \
auth_server auth_secret auth_port \
dae_client dae_secret dae_port \
- ownip \
+ ownip radius_client_addr \
eap_reauth_period
# radius can provide VLAN ID for clients
}
[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
+ [ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
append bss_conf "eapol_key_index_workaround=1" "$N"
append bss_conf "ieee8021x=1" "$N"
[ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
[ "$wps_label" -gt 0 ] && append config_methods label
+ # WPS not possible on Multi-AP backhaul-only SSID
+ [ "$multi_ap" = 1 ] && wps_possible=
+
[ -n "$wps_possible" -a -n "$config_methods" ] && {
set_default ext_registrar 0
set_default wps_device_type "6-0050F204-1"
- set_default wps_device_name "Lede AP"
- set_default wps_manufacturer "www.lede-project.org"
+ set_default wps_device_name "OpenWrt AP"
+ set_default wps_manufacturer "www.openwrt.org"
set_default wps_independent 1
wps_state=2
append bss_conf "wps_independent=$wps_independent" "$N"
[ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
[ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
+ [ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && {
+ append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N"
+ if [ -z "$multi_ap_backhaul_key" ]; then
+ :
+ elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then
+ wireless_setup_vif_failed INVALID_WPA_PSK
+ return 1
+ elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then
+ append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N"
+ else
+ append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N"
+ fi
+ }
}
append bss_conf "ssid=$ssid" "$N"
[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
[ -n "$iapp_interface" ] && {
local ifname
- network_get_device ifname "$iapp_interface" || ifname = "$iapp_interface"
+ network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
append bss_conf "iapp_interface=$ifname" "$N"
}
+ json_get_vars ieee80211v
+ set_default ieee80211v 0
+ if [ "$ieee80211v" -eq "1" ]; then
+ json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
+
+ set_default time_advertisement 0
+ set_default wnm_sleep_mode 0
+ set_default bss_transition 0
+
+ append bss_conf "time_advertisement=$time_advertisement" "$N"
+ [ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
+ append bss_conf "wnm_sleep_mode=$wnm_sleep_mode" "$N"
+ append bss_conf "bss_transition=$bss_transition" "$N"
+ fi
+
+ json_get_vars ieee80211k
+ set_default ieee80211k 0
+ if [ "$ieee80211k" -eq "1" ]; then
+ json_get_vars rrm_neighbor_report rrm_beacon_report
+
+ set_default rrm_neighbor_report 1
+ set_default rrm_beacon_report 1
+ append bss_conf "rrm_neighbor_report=$rrm_neighbor_report" "$N"
+ append bss_conf "rrm_beacon_report=$rrm_beacon_report" "$N"
+ fi
+
if [ "$wpa" -ge "1" ]; then
- json_get_vars nasid ieee80211r
+ json_get_vars ieee80211r
set_default ieee80211r 0
- [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
if [ "$ieee80211r" -gt "0" ]; then
- json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
- reassociation_deadline pmk_r1_push
- json_get_values r0kh r0kh
- json_get_values r1kh r1kh
-
- set_default mobility_domain "4f57"
- set_default r0_key_lifetime 10000
- set_default r1_key_holder "00004f577274"
+ json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+
+ set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
+ set_default ft_over_ds 1
set_default reassociation_deadline 1000
- set_default pmk_r1_push 0
+
+ case "$auth_type" in
+ psk|sae|psk-sae)
+ set_default ft_psk_generate_local 1
+ ;;
+ *)
+ set_default ft_psk_generate_local 0
+ ;;
+ esac
append bss_conf "mobility_domain=$mobility_domain" "$N"
- append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
- append bss_conf "r1_key_holder=$r1_key_holder" "$N"
+ append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
+ append bss_conf "ft_over_ds=$ft_over_ds" "$N"
append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
- append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
-
- for kh in $r0kh; do
- append bss_conf "r0kh=${kh//,/ }" "$N"
- done
- for kh in $r1kh; do
- append bss_conf "r1kh=${kh//,/ }" "$N"
- done
+ [ -n "$nasid" ] || append bss_conf "nas_identifier=${macaddr//\:}" "$N"
+
+ if [ "$ft_psk_generate_local" -eq "0" ]; then
+ json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+ json_get_values r0kh r0kh
+ json_get_values r1kh r1kh
+
+ set_default r0_key_lifetime 10000
+ set_default pmk_r1_push 0
+
+ [ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
+ append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
+ append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
+
+ for kh in $r0kh; do
+ append bss_conf "r0kh=${kh//,/ }" "$N"
+ done
+ for kh in $r1kh; do
+ append bss_conf "r1kh=${kh//,/ }" "$N"
+ done
+ fi
fi
+ append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
+
hostapd_append_wpa_key_mgmt
[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
fi
append bss_conf "rsn_preauth=1" "$N"
append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
else
- set_default auth_cache 0
+ case "$auth_type" in
+ sae|psk-sae|owe)
+ set_default auth_cache 1
+ ;;
+ *)
+ set_default auth_cache 0
+ ;;
+ esac
fi
append bss_conf "okc=$auth_cache" "$N"
# RSN -> allow management frame protection
case "$ieee80211w" in
[012])
- json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
+ json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
append bss_conf "ieee80211w=$ieee80211w" "$N"
[ "$ieee80211w" -gt "0" ] && {
+ append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
[ -n "$ieee80211w_max_timeout" ] && \
append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
[ -n "$ieee80211w_retry_timeout" ] && \
}
}
+ bss_md5sum=$(echo $bss_conf | md5sum | cut -d" " -f1)
+ append bss_conf "config_id=$bss_md5sum" "$N"
+
append "$var" "$bss_conf" "$N"
return 0
}
_wpa_supplicant_common "$1"
- json_get_vars mode wds
+ json_get_vars mode wds multi_ap
[ -n "$network_bridge" ] && {
fail=
fail=1
;;
sta)
- [ "$wds" = 1 ] || fail=1
+ [ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1
;;
esac
country_str="country=$country"
}
+ multiap_flag_file="${_config}.is_multiap"
+ if [ "$multi_ap" = "1" ]; then
+ touch "$multiap_flag_file"
+ else
+ [ -e "$multiap_flag_file" ] && rm "$multiap_flag_file"
+ fi
wpa_supplicant_teardown_interface "$ifname"
cat > "$_config" <<EOF
$ap_scan
return 0
}
+wpa_supplicant_set_fixed_freq() {
+ local freq="$1"
+ local htmode="$2"
+
+ append network_data "fixed_freq=1" "$N$T"
+ append network_data "frequency=$freq" "$N$T"
+ case "$htmode" in
+ NOHT) append network_data "disable_ht=1" "$N$T";;
+ HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
+ HT40*|VHT40*|VHT80*|VHT160*) append network_data "ht40=1" "$N$T";;
+ esac
+ case "$htmode" in
+ VHT*) append network_data "vht=1" "$N$T";;
+ esac
+ case "$htmode" in
+ VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
+ VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
+ *) append network_data "max_oper_chwidth=0" "$N$T";;
+ esac
+}
+
wpa_supplicant_add_network() {
local ifname="$1"
+ local freq="$2"
+ local htmode="$3"
+ local noscan="$4"
_wpa_supplicant_common "$1"
wireless_vif_parse_encryption
json_get_vars \
ssid bssid key \
basic_rate mcast_rate \
- ieee80211w ieee80211r
+ ieee80211w ieee80211r \
+ multi_ap
+
+ case "$auth_type" in
+ sae|owe|eap192|eap-eap192)
+ set_default ieee80211w 2
+ ;;
+ psk-sae)
+ set_default ieee80211w 1
+ ;;
+ esac
set_default ieee80211r 0
+ set_default multi_ap 0
local key_mgmt='NONE'
local enc_str=
[[ "$_w_mode" = "adhoc" ]] && {
append network_data "mode=1" "$N$T"
- [ -n "$channel" ] && {
- freq="$(get_freq "$phy" "$channel")"
- append network_data "fixed_freq=1" "$N$T"
- append network_data "frequency=$freq" "$N$T"
- }
+ [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
scan_ssid="scan_ssid=0"
}
[[ "$_w_mode" = "mesh" ]] && {
- json_get_vars mesh_id
- ssid="${mesh_id}"
+ json_get_vars mesh_id mesh_fwding mesh_rssi_threshold
+ [ -n "$mesh_id" ] && ssid="${mesh_id}"
append network_data "mode=5" "$N$T"
- [ -n "$channel" ] && {
- freq="$(get_freq "$phy" "$channel")"
- append network_data "frequency=$freq" "$N$T"
- }
+ [ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T"
+ [ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T"
+ [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
+ [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
append wpa_key_mgmt "SAE"
scan_ssid=""
}
- [[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ]] && append network_data "$_w_modestr" "$N$T"
+ [ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ] && append network_data "$_w_modestr" "$N$T"
+
+ [ "$multi_ap" = 1 -a "$_w_mode" = "sta" ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
case "$auth_type" in
none) ;;
+ owe)
+ hostapd_append_wpa_key_mgmt
+ key_mgmt="$wpa_key_mgmt"
+ ;;
wep)
local wep_keyidx=0
hostapd_append_wep_key network_data
append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
;;
- psk)
+ wps)
+ key_mgmt='WPS'
+ ;;
+ psk|sae|psk-sae)
local passphrase
if [ "$_w_mode" != "mesh" ]; then
if [ ${#key} -eq 64 ]; then
passphrase="psk=${key}"
else
- passphrase="psk=\"${key}\""
+ if [ "$_w_mode" = "mesh" ]; then
+ passphrase="sae_password=\"${key}\""
+ else
+ passphrase="psk=\"${key}\""
+ fi
fi
append network_data "$passphrase" "$N$T"
;;
- eap)
+ eap|eap192|eap-eap192)
hostapd_append_wpa_key_mgmt
key_mgmt="$wpa_key_mgmt"
append network_data "client_cert=\"$client_cert\"" "$N$T"
append network_data "private_key=\"$priv_key\"" "$N$T"
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
+
+ json_get_vars subject_match
+ [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
+
+ json_get_values altsubject_match altsubject_match
+ if [ -n "$altsubject_match" ]; then
+ local list=
+ for x in $altsubject_match; do
+ append list "$x" ";"
+ done
+ append network_data "altsubject_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_match domain_match
+ if [ -n "$domain_match" ]; then
+ local list=
+ for x in $domain_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_suffix_match domain_suffix_match
+ if [ -n "$domain_suffix_match" ]; then
+ local list=
+ for x in $domain_suffix_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_suffix_match=\"$list\"" "$N$T"
+ fi
;;
fast|peap|ttls)
json_get_vars auth password ca_cert2 client_cert2 priv_key2 priv_key2_pwd
append network_data "password=\"$password\"" "$N$T"
fi
+ json_get_vars subject_match
+ [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
+
+ json_get_values altsubject_match altsubject_match
+ if [ -n "$altsubject_match" ]; then
+ local list=
+ for x in $altsubject_match; do
+ append list "$x" ";"
+ done
+ append network_data "altsubject_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_match domain_match
+ if [ -n "$domain_match" ]; then
+ local list=
+ for x in $domain_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_match=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_suffix_match domain_suffix_match
+ if [ -n "$domain_suffix_match" ]; then
+ local list=
+ for x in $domain_suffix_match; do
+ append list "$x" ";"
+ done
+ append network_data "domain_suffix_match=\"$list\"" "$N$T"
+ fi
+
phase2proto="auth="
case "$auth" in
"auth"*)
auth="$(echo $auth | cut -b 5- )"
[ "$eap_type" = "ttls" ] &&
phase2proto="autheap="
+ json_get_vars subject_match2
+ [ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
+
+ json_get_values altsubject_match2 altsubject_match2
+ if [ -n "$altsubject_match2" ]; then
+ local list=
+ for x in $altsubject_match2; do
+ append list "$x" ";"
+ done
+ append network_data "altsubject_match2=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_match2 domain_match2
+ if [ -n "$domain_match2" ]; then
+ local list=
+ for x in $domain_match2; do
+ append list "$x" ";"
+ done
+ append network_data "domain_match2=\"$list\"" "$N$T"
+ fi
+
+ json_get_values domain_suffix_match2 domain_suffix_match2
+ if [ -n "$domain_suffix_match2" ]; then
+ local list=
+ for x in $domain_suffix_match2; do
+ append list "$x" ";"
+ done
+ append network_data "domain_suffix_match2=\"$list\"" "$N$T"
+ fi
;;
esac
append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
;;
esac
}
- local beacon_int brates mrate
[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
append network_data "mcast_rate=$mc_rate" "$N$T"
}
- local ht_str
- [[ "$_w_mode" = adhoc ]] || ibss_htmode=
- [ -n "$ibss_htmode" ] && append network_data "htmode=$ibss_htmode" "$N$T"
-
- cat >> "$_config" <<EOF
+ if [ "$key_mgnt" = "WPS" ]; then
+ echo "wps_cred_processing=1" >> "$_config"
+ else
+ cat >> "$_config" <<EOF
network={
$scan_ssid
ssid="$ssid"
$network_data
}
EOF
+ fi
return 0
}
wpa_supplicant_run() {
- local ifname="$1"; shift
+ local ifname="$1"
+ local hostapd_ctrl="$2"
_wpa_supplicant_common "$ifname"
- /usr/sbin/wpa_supplicant -B \
- ${network_bridge:+-b $network_bridge} \
- -P "/var/run/wpa_supplicant-${ifname}.pid" \
- -D ${_w_driver:-wext} \
- -i "$ifname" \
- -c "$_config" \
- -C "$_rpath" \
- "$@"
+ ubus wait_for wpa_supplicant.$phy
+ ubus call wpa_supplicant.$phy config_add "{ \
+ \"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
+ \"iface\": \"$ifname\", \"config\": \"$_config\" \
+ ${network_bridge:+, \"bridge\": \"$network_bridge\"} \
+ ${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
+ }"
ret="$?"
- wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
[ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
+ local supplicant_pid=$(ubus call service list '{"name": "hostapd"}' | jsonfilter -l 1 -e "@['hostapd'].instances['supplicant-${phy}'].pid")
+ wireless_add_process "$supplicant_pid" "/usr/sbin/wpa_supplicant" 1
+
return $ret
}
hostapd_common_cleanup() {
- killall hostapd wpa_supplicant meshd-nl80211
+ killall meshd-nl80211
}
projects / openwrt / openwrt.git / blobdiff