hostapd: add support for configuring supported rates

[openwrt/openwrt.git] / package / network / services / hostapd / files / netifd.sh

diff --git a/package/network/services/hostapd/files/netifd.sh b/package/network/services/hostapd/files/netifd.sh
index 30d12e904f08861f11e00a61faf5223c0fb62355..1ec9e45feda5e5a33942c5db2d39e82924dc5638 100644 (file)
--- a/package/network/services/hostapd/files/netifd.sh
+++ b/package/network/services/hostapd/files/netifd.sh
@@ -1,4 +1,4 @@
-hostapd_add_rate() {
+wpa_supplicant_add_rate() {
        local var="$1"
        local val="$(($2 / 1000))"
        local sub="$((($2 / 100) % 10))"
@@ -6,7 +6,7 @@ hostapd_add_rate() {
        [ $sub -gt 0 ] && append $var "."
 }
 
-hostapd_add_basic_rate() {
+hostapd_add_rate() {
        local var="$1"
        local val="$(($2 / 100))"
        append $var "$val" " "
@@ -49,6 +49,7 @@ hostapd_add_log_config() {
 
 hostapd_common_add_device_config() {
        config_add_array basic_rate
+       config_add_array supported_rates
 
        config_add_string country
        config_add_boolean country_ie doth
@@ -82,13 +83,21 @@ hostapd_prepare_device_config() {
        local brlist= br
        json_get_values basic_rate_list basic_rate
        for br in $basic_rate_list; do
-               hostapd_add_basic_rate brlist "$br"
+               hostapd_add_rate brlist "$br"
        done
        case "$require_mode" in
                g) brlist="60 120 240" ;;
                n) append base_cfg "require_ht=1" "$N";;
                ac) append base_cfg "require_vht=1" "$N";;
        esac
+
+       local rlist= r
+       json_get_values rate_list supported_rates
+       for r in $rate_list; do
+               hostapd_add_rate rlist "$r"
+       done
+
+       [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
        [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
        [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
 
@@ -130,10 +139,12 @@ hostapd_common_add_bss_config() {
        config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
 
        config_add_int dynamic_vlan vlan_naming
-       config_add_string vlan_tagged_interface
+       config_add_string vlan_tagged_interface vlan_bridge
 
        config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 
+       config_add_string wpa_psk_file
+
        config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
        config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 
@@ -144,6 +155,7 @@ hostapd_common_add_bss_config() {
 
        config_add_int mcast_rate
        config_add_array basic_rate
+       config_add_array supported_rates
 }
 
 hostapd_set_bss_options() {
@@ -161,7 +173,8 @@ hostapd_set_bss_options() {
                maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
                wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
                wps_device_type wps_device_name wps_manufacturer wps_pin \
-               macfilter ssid wmm hidden short_preamble rsn_preauth
+               macfilter ssid wmm hidden short_preamble rsn_preauth \
+               iapp_interface
 
        set_default isolate 0
        set_default maxassoc 0
@@ -201,7 +214,7 @@ hostapd_set_bss_options() {
                        wps_not_configured=1
                ;;
                psk)
-                       json_get_vars key
+                       json_get_vars key wpa_psk_file
                        if [ ${#key} -lt 8 ]; then
                                wireless_setup_vif_failed INVALID_WPA_PSK
                                return 1
@@ -210,6 +223,10 @@ hostapd_set_bss_options() {
                        else
                                append bss_conf "wpa_passphrase=$key" "$N"
                        fi
+                       [ -n "$wpa_psk_file" ] && {
+                               [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
+                               append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
+                       }
                        wps_possible=1
                ;;
                eap)
@@ -217,9 +234,10 @@ hostapd_set_bss_options() {
                                auth_server auth_secret auth_port \
                                acct_server acct_secret acct_port \
                                dae_client dae_secret dae_port \
-                               nasid iapp_interface ownip \
+                               nasid ownip \
                                eap_reauth_period dynamic_vlan \
-                               vlan_tagged_interface
+                               vlan_naming vlan_tagged_interface \
+                               vlan_bridge
 
                        # legacy compatibility
                        [ -n "$auth_server" ] || json_get_var auth_server server
@@ -259,6 +277,8 @@ hostapd_set_bss_options() {
                        [ -n "$dynamic_vlan" ] && {
                                append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
                                append bss_conf "vlan_naming=$vlan_naming" "$N"
+                               [ -n "$vlan_bridge" ] && \
+                                       append bss_conf "vlan_bridge=$vlan_bridge" "$N"
                                [ -n "$vlan_tagged_interface" ] && \
                                        append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
                        }
@@ -562,14 +582,14 @@ wpa_supplicant_add_network() {
        [ -n "$basic_rate" ] && {
                local br rate_list=
                for br in $basic_rate; do
-                       hostapd_add_rate rate_list "$br"
+                       wpa_supplicant_add_rate rate_list "$br"
                done
                [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
        }
 
        [ -n "$mcast_rate" ] && {
                local mc_rate=
-               hostapd_add_rate mc_rate "$mcast_rate"
+               wpa_supplicant_add_rate mc_rate "$mcast_rate"
                append network_data "mcast_rate=$mc_rate" "$N$T"
        }