ath10k-firmware: update qca9984 firmware

[openwrt/openwrt.git] / package / network / services / hostapd / files / netifd.sh

diff --git a/package/network/services/hostapd/files/netifd.sh b/package/network/services/hostapd/files/netifd.sh
index b87672c4d72c7fc3d4915363b49dbcfe08a3eda7..988ebc7757fedfba3eba464a973824622c3af8c3 100644 (file)
--- a/package/network/services/hostapd/files/netifd.sh
+++ b/package/network/services/hostapd/files/netifd.sh
@@ -36,6 +36,14 @@ hostapd_append_wep_key() {
        esac
 }
 
+hostapd_append_wpa_key_mgmt() {
+       local auth_type="$(echo $auth_type | tr 'a-z' 'A-Z')"
+
+       append wpa_key_mgmt "WPA-$auth_type"
+       [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type}"
+       [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type}-SHA256"
+}
+
 hostapd_add_log_config() {
        config_add_boolean \
                log_80211 \
@@ -150,6 +158,7 @@ hostapd_common_add_bss_config() {
        config_add_string wpa_psk_file
 
        config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
+       config_add_int wps_ap_setup_locked wps_independent
        config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 
        config_add_boolean ieee80211r pmk_r1_push
@@ -183,11 +192,11 @@ hostapd_set_bss_options() {
        json_get_vars \
                wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
                maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
-               wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
-               wps_device_type wps_device_name wps_manufacturer wps_pin \
+               wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
+               wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
                macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
                iapp_interface eapol_version acct_server acct_secret acct_port \
-               dynamic_vlan
+               dynamic_vlan ieee80211w
 
        set_default isolate 0
        set_default maxassoc 0
@@ -256,7 +265,6 @@ hostapd_set_bss_options() {
                        [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
                        wps_possible=1
-                       append wpa_key_mgmt "WPA-PSK"
                ;;
                eap)
                        json_get_vars \
@@ -291,7 +299,6 @@ hostapd_set_bss_options() {
                        [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
                        append bss_conf "eapol_key_index_workaround=1" "$N"
                        append bss_conf "ieee8021x=1" "$N"
-                       append wpa_key_mgmt "WPA-EAP"
 
                        [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
                ;;
@@ -322,6 +329,7 @@ hostapd_set_bss_options() {
                set_default wps_device_type "6-0050F204-1"
                set_default wps_device_name "Lede AP"
                set_default wps_manufacturer "www.lede-project.org"
+               set_default wps_independent 1
 
                wps_state=2
                [ -n "$wps_configured" ] && wps_state=1
@@ -331,11 +339,12 @@ hostapd_set_bss_options() {
                append bss_conf "eap_server=1" "$N"
                [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
                append bss_conf "wps_state=$wps_state" "$N"
-               append bss_conf "ap_setup_locked=0" "$N"
                append bss_conf "device_type=$wps_device_type" "$N"
                append bss_conf "device_name=$wps_device_name" "$N"
                append bss_conf "manufacturer=$wps_manufacturer" "$N"
                append bss_conf "config_methods=$config_methods" "$N"
+               append bss_conf "wps_independent=$wps_independent" "$N"
+               [ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
                [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
        }
 
@@ -376,11 +385,9 @@ hostapd_set_bss_options() {
                        for kh in $r1kh; do
                                append bss_conf "r1kh=${kh//,/ }" "$N"
                        done
-
-                       [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
-                       [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
                fi
 
+               hostapd_append_wpa_key_mgmt
                [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
        fi
 
@@ -397,7 +404,6 @@ hostapd_set_bss_options() {
                [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 
                # RSN -> allow management frame protection
-               json_get_var ieee80211w ieee80211w
                case "$ieee80211w" in
                        [012])
                                json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -614,8 +620,10 @@ wpa_supplicant_add_network() {
                psk)
                        local passphrase
 
-                       append wpa_key_mgmt "WPA-PSK"
-                       [ "$ieee80211r" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
+                       if [ "$_w_mode" != "mesh" ]; then
+                               hostapd_append_wpa_key_mgmt
+                       fi
+
                        key_mgmt="$wpa_key_mgmt"
 
                        if [ ${#key} -eq 64 ]; then
@@ -626,8 +634,7 @@ wpa_supplicant_add_network() {
                        append network_data "$passphrase" "$N$T"
                ;;
                eap)
-                       append wpa_key_mgmt "WPA-EAP"
-                       [ "$ieee80211r" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
+                       hostapd_append_wpa_key_mgmt
                        key_mgmt="$wpa_key_mgmt"
 
                        json_get_vars eap_type identity anonymous_identity ca_cert