proto_config_add_string username
proto_config_add_string password
proto_config_add_string pincode
- proto_config_add_string delay
+ proto_config_add_int delay
proto_config_add_string modes
+ proto_config_add_string pdptype
+ proto_config_add_int profile
+ proto_config_add_boolean dhcpv6
+ proto_config_add_boolean autoconnect
+ proto_config_add_defaults
}
-qmi_disconnect() {
- # disable previous autoconnect state using the global handle
- # do not reuse previous wds client id to prevent hangs caused by stale data
- uqmi -s -d "$device" \
- --stop-network 0xffffffff \
- --autoconnect > /dev/null
-}
-
-qmi_wds_release() {
- [ -n "$cid" ] || return 0
-
- uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
- uci_revert_state network $interface cid
-}
-
-_proto_qmi_setup() {
+proto_qmi_setup() {
local interface="$1"
- local device apn auth username password pincode delay modes cid pdh
- json_get_vars device apn auth username password pincode delay modes
+ local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+ local cid_4 pdh_4 cid_6 pdh_6
+ local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
+ json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+
+ [ "$metric" = "" ] && metric="0"
[ -n "$ctl_device" ] && device=$ctl_device
proto_set_available "$interface" 0
return 1
}
+
+ device="$(readlink -f $device)"
[ -c "$device" ] || {
echo "The specified control device does not exist"
proto_notify_error "$interface" NO_DEVICE
}
}
- [ -n "$apn" ] || {
- echo "No APN specified"
- proto_notify_error "$interface" NO_APN
- return 1
- }
-
- qmi_disconnect
-
uqmi -s -d "$device" --set-data-format 802.3
uqmi -s -d "$device" --wda-set-data-format 802.3
[ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
- echo "Starting network $apn"
- cid=`uqmi -s -d "$device" --get-client-id wds`
- [ $? -ne 0 ] && {
- echo "Unable to obtain client ID"
- proto_notify_error "$interface" NO_CID
- return 1
+ echo "Starting network $interface"
+
+ pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
+ [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
+
+ if [ "$pdptype" = "ip" ]; then
+ [ -z "$autoconnect" ] && autoconnect=1
+ [ "$autoconnect" = 0 ] && autoconnect=""
+ else
+ [ "$autoconnect" = 1 ] || autoconnect=""
+ fi
+
+ [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
+ cid_4=`uqmi -s -d "$device" --get-client-id wds`
+ [ $? -ne 0 ] && {
+ echo "Unable to obtain client ID"
+ proto_notify_error "$interface" NO_CID
+ return 1
+ }
+
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
+
+ # try to clear previous autoconnect state
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+ --stop-network 0xffffffff \
+ --autoconnect > /dev/null
+
+ pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+ --start-network \
+ ${apn:+--apn $apn} \
+ ${profile:+--profile $profile} \
+ ${auth:+--auth-type $auth} \
+ ${username:+--username $username} \
+ ${password:+--password $password} \
+ ${autoconnect:+--autoconnect}`
+ [ $? -ne 0 ] && {
+ echo "Unable to connect IPv4"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
+ }
}
- uqmi -s -d "$device" --set-client-id wds,"$cid" \
- --start-network "$apn" \
- ${auth:+--auth-type $auth} \
- ${username:+--username $username} \
- ${password:+--password $password} \
- --autoconnect > /dev/null
+ [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
+ cid_6=`uqmi -s -d "$device" --get-client-id wds`
+ [ $? -ne 0 ] && {
+ echo "Unable to obtain client ID"
+ proto_notify_error "$interface" NO_CID
+ return 1
+ }
- echo "Starting DHCP"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
+
+ # try to clear previous autoconnect state
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+ --stop-network 0xffffffff \
+ --autoconnect > /dev/null
+
+ pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+ --start-network \
+ ${apn:+--apn $apn} \
+ ${profile:+--profile $profile} \
+ ${auth:+--auth-type $auth} \
+ ${username:+--username $username} \
+ ${password:+--password $password} \
+ ${autoconnect:+--autoconnect}`
+ [ $? -ne 0 ] && {
+ echo "Unable to connect IPv6"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
+ }
+ }
+
+ echo "Setting up $ifname"
proto_init_update "$ifname" 1
+ proto_set_keep 1
+ proto_add_data
+ [ -n "$pdh_4" ] && {
+ json_add_string "cid_4" "$cid_4"
+ json_add_string "pdh_4" "$pdh_4"
+ }
+ [ -n "$pdh_6" ] && {
+ json_add_string "cid_6" "$cid_6"
+ json_add_string "pdh_6" "$pdh_6"
+ }
+ proto_close_data
proto_send_update "$interface"
+ [ -n "$pdh_6" ] && {
+ if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
+ json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
+ json_select ipv6
+ json_get_var ip_6 ip
+ json_get_var gateway_6 gateway
+ json_get_var dns1_6 dns1
+ json_get_var dns2_6 dns2
+ json_get_var ip_prefix_length ip-prefix-length
+
+ proto_init_update "$ifname" 1
+ proto_set_keep 1
+ proto_add_ipv6_address "$ip_6" "128"
+ proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
+ proto_add_ipv6_route "$gateway_6" "128"
+ [ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
+ [ "$peerdns" = 0 ] || {
+ proto_add_dns_server "$dns1_6"
+ proto_add_dns_server "$dns2_6"
+ }
+ proto_send_update "$interface"
+ else
+ json_init
+ json_add_string name "${interface}_6"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcpv6"
+ proto_add_dynamic_defaults
+ # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+ json_add_string extendprefix 1
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ fi
+ }
- json_init
- json_add_string name "${interface}_4"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcp"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
-
- json_init
- json_add_string name "${interface}_6"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcpv6"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
+ [ -n "$pdh_4" ] && {
+ json_init
+ json_add_string name "${interface}_4"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcp"
+ proto_add_dynamic_defaults
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ }
}
-proto_qmi_setup() {
- local ret
+qmi_wds_stop() {
+ local cid="$1"
+ local pdh="$2"
- _proto_qmi_setup $@
- ret=$?
+ [ -n "$cid" ] || return
- [ "$ret" = 0 ] || {
- logger "qmi bringup failed, retry in 15s"
- sleep 15
- }
+ uqmi -s -d "$device" --set-client-id wds,"$cid" \
+ --stop-network 0xffffffff \
+ --autoconnect > /dev/null
- return $rt
+ [ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
+ uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
}
proto_qmi_teardown() {
local interface="$1"
- local device
+ local device cid_4 pdh_4 cid_6 pdh_6
json_get_vars device
[ -n "$ctl_device" ] && device=$ctl_device
- local cid=$(uci_get_state network $interface cid)
+ echo "Stopping network $interface"
+
+ json_load "$(ubus call network.interface.$interface status)"
+ json_select data
+ json_get_vars cid_4 pdh_4 cid_6 pdh_6
- echo "Stopping network"
- qmi_disconnect
- qmi_wds_release
+ qmi_wds_stop "$cid_4" "$pdh_4"
+ qmi_wds_stop "$cid_6" "$pdh_6"
proto_init_update "*" 0
proto_send_update "$interface"