ar71xx: add support for TP-Link WBS210/510

[openwrt/openwrt.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index c348b4fbda7045177d28e0c12503d4606abb5269..5a2bf0cfc41991d684c0ad0eaf6bb0ff6441cc08 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -45,7 +45,6 @@ arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
        ;;
-ap113|\
 db120)
        ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
        ;;
@@ -58,6 +57,8 @@ ap147-010)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
        ;;
 ap90q|\
+cpe830|\
+cpe870|\
 dr531)
        ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
        ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
@@ -66,6 +67,15 @@ dr531)
        ap90q)
                ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
                ;;
+       cpe830|\
+       cpe870)
+               ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+               ucidef_set_rssimon "wlan0" "200000" "1"
+               ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13"
+               ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13"
+               ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13"
+               ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13"
+               ;;
        esac
        ;;
 bhr-4grv2)
@@ -142,7 +152,9 @@ cf-e530n)
        ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
        ;;
 cpe210|\
-cpe510)
+cpe510|\
+wbs210|\
+wbs510)
        ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
        ucidef_set_rssimon "wlan0" "200000" "1"
@@ -418,6 +430,12 @@ omy-x1)
 qihoo-c301)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
        ;;
+re450)
+       ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx"
+       ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link"
+       ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
+       ;;
 smart-300)
        ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
@@ -433,6 +451,9 @@ som9331)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "$board:green:system" "1-1"
        ;;
+sr3200)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
+       ;;
 tellstick-znet-lite)
        ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx"
        ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link"
@@ -514,6 +535,10 @@ tl-wa750re)
        ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:orange:signal4" "wlan0" "60" "100" "-59" "13"
        ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:orange:signal5" "wlan0" "80" "100" "-79" "13"
        ;;
+tl-wa801nd-v3)
+       ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
+       ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+       ;;
 tl-wa850re)
        ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
@@ -582,6 +607,7 @@ tl-wpa8630)
 tl-wr802n-v1)
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
        ;;
+tl-wr940n-v4|\
 tl-wr941nd-v6)
        ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
@@ -611,6 +637,15 @@ tl-wr1043nd-v2)
        ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
        ;;
+tl-wr1043nd-v4)
+       ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+       ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+       ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+       ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+       ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+       ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+       ;;
 tl-wr2543n)
        ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
        ;;
@@ -723,6 +758,9 @@ wzr-hp-g300nh)
        ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
        ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
        ;;
+xd3200)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
+       ;;
 z1)
        ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1"
        ;;