* by the Free Software Foundation.
*/
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
#include "devices.h"
-#include "dev-dsa.h"
#include "dev-m25p80.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#define TL_WA901ND_GPIO_BTN_RESET 11
#define TL_WA901ND_GPIO_BTN_QSS 12
-#define TL_WA901ND_BUTTONS_POLL_INTERVAL 20
+#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition tl_wa901nd_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x140000,
- } , {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x290000,
- } , {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "firmware",
- .offset = 0x020000,
- .size = 0x3d0000,
- }
+static const char *tl_wa901nd_part_probes[] = {
+ "tp-link",
+ NULL,
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data tl_wa901nd_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = tl_wa901nd_partitions,
- .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions),
-#endif
+ .part_probes = tl_wa901nd_part_probes,
};
static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
{
- .name = "tl-wa901nd:green:system",
+ .name = "tp-link:green:system",
.gpio = TL_WA901ND_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
- .name = "tl-wa901nd:green:qss",
+ .name = "tp-link:green:qss",
.gpio = TL_WA901ND_GPIO_LED_QSS,
.active_low = 1,
}
};
-static struct gpio_button tl_wa901nd_gpio_buttons[] __initdata = {
+static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 3,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WA901ND_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "qss",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 3,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WA901ND_GPIO_BTN_QSS,
.active_low = 1,
}
};
-static struct dsa_chip_data tl_wa901nd_v1_dsa_chip = {
- .port_names[0] = "cpu",
- .port_names[1] = "lan",
-};
-
-static struct dsa_platform_data tl_wa901nd_v1_dsa_data = {
- .nr_chips = 1,
- .chip = &tl_wa901nd_v1_dsa_chip,
-};
-
static void __init tl_wa901nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- ar71xx_set_mac_base(mac);
-
/*
* ar71xx_eth0 would be the WAN port, but is not connected on
* the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
* however we have a single LAN port only.
*/
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
- ar71xx_add_device_mdio(0x0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
+ ar71xx_add_device_mdio(0, 0x0);
ar71xx_add_device_eth(1);
- ar71xx_add_device_dsa(1, &tl_wa901nd_v1_dsa_data);
-
ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
- tl_wa901nd_leds_gpio);
+ tl_wa901nd_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa901nd_gpio_buttons),
- tl_wa901nd_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_gpio_keys),
+ tl_wa901nd_gpio_keys);
ap91_pci_init(ee, mac);
}
MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
- tl_wa901nd_setup);
+ tl_wa901nd_setup);