ar71xx: Add support for the OMYlink OMY-X1

[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-mynet-rext.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
index 02d168ef4b0c2c49e7965de5851a00daf23a1d12..3d48ca8fa5de21582d3d0c72ccaecc84d4c00e73 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/ath9k_platform.h>
 #include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 
@@ -124,6 +125,21 @@ static struct gpio_keys_button mynet_rext_gpio_keys[] __initdata = {
        },
 };
 
+static struct at803x_platform_data mynet_rext_at803x_data = {
+       .disable_smarteee = 0,
+       .enable_rgmii_rx_delay = 1,
+       .enable_rgmii_tx_delay = 0,
+       .fixup_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info mynet_rext_mdio0_info[] = {
+        {
+                .bus_id = "ag71xx-mdio.0",
+                .phy_addr = 4,
+                .platform_data = &mynet_rext_at803x_data,
+        },
+};
+
 static void mynet_rext_get_mac(const char *name, char *mac)
 {
        u8 *nvram = (u8 *) KSEG1ADDR(MYNET_REXT_NVRAM_ADDR);
@@ -169,12 +185,16 @@ static void __init mynet_rext_setup(void)
 
        ath79_register_mdio(0, 0x0);
 
+       mdiobus_register_board_info(mynet_rext_mdio0_info,
+                                   ARRAY_SIZE(mynet_rext_mdio0_info));
+
        /* LAN */
        mynet_rext_get_mac("et0macaddr=", ath79_eth0_data.mac_addr);
 
        /* GMAC0 is connected to an external PHY on Port 4 */
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ath79_eth0_data.phy_mask = BIT(4);
+       ath79_eth0_pll_data.pll_10   = 0x00001313; /* athrs_mac.c */
        ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
        ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
        ath79_register_eth(0);