+include ./legacy-devices.mk
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
# $(1): rootfs type.
# $(6): padding size.
define CatFiles
if [ $(2) -eq 0 ]; then \
- filename="$(3)"; fstype=$$$${filename##*\.}; \
- case "$$$${fstype}" in \
+ filename="$(3)"; fstype=$${filename##*\.}; \
+ case "$${fstype}" in \
"jffs2-64k") bs=65536;; \
"jffs2-128k") bs=131072;; \
"jffs2-256k") bs=262144;; \
*) bs=`stat -c%s $(1)`;; \
esac; \
- ( dd if=$(1) bs=$$$${bs} conv=sync; cat $(3) ) > $(5); \
+ ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \
if [ -n "$(6)" ]; then \
- case "$$$${fstype}" in \
+ case "$${fstype}" in \
squashfs*) \
padjffs2 $(5) $(6); \
;; \
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
-hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
-mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
-qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware)
+wrtnode2q_mtdlayout=mtdparts=spi0.0:192k(u-boot),64k(u-boot-env),64k(art),1472k(kernel),14592k(rootfs),16064k@0x50000(firmware),16384k@0x0(fullflash)
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
define Image/Build/CameoAP94
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
$(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
+ $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=$(call sysupname,$(1),$(2)); \
) > $(call factoryname,$(1),$(2)); \
fi; \
fi
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
+ $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
sh $(TOPDIR)/scripts/combined-image.sh \
endef
define Image/Build/WZRHP
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(3)-4*$(4)*1024)),$(4))
+ $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
define Image/Build/WHRHPG300N
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
+ $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
define Image/Build/Cameo
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
+ $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- factory_size=$$$$(($(fwsize) - $(6))); \
+ factory_size=$$(($(fwsize) - $(6))); \
( \
- dd if=$(call sysupname,$(1),$(2)) bs=$$$${factory_size} conv=sync; \
+ dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \
echo -n $(5); \
) > $(call factoryname,$(1),$(2)); \
fi
define Image/Build/CameoHornet
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
+ $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
for r in $(7); do \
- [ -n "$$$$r" ] && dashr="-$$$$r" || dashr=; \
- [ -z "$$$$r" ] && r="DEF"; \
- mkcameofw -M HORNET -R "$$$$r" -S $(5) -V $(6) -c \
+ [ -n "$$r" ] && dashr="-$$r" || dashr=; \
+ [ -z "$$r" ] && r="DEF"; \
+ mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \
-K $(8) -I $(fwsize) \
-k "$(call sysupname,$(1),$(2))" \
- -o $(call imgname,$(1),$(2))-factory$$$$dashr.bin; \
+ -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \
true; \
done; \
fi
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
+ edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
-n "uImage" \
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
-o $(KDIR_TMP)/$(2)-uImage; \
- edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
+ edimax_fw_header -m $(5) -v "$(shell echo -n LEDE$(REVISION) | cut -c -13)" \
-n "rootfs" \
-i $(KDIR)/root.$(1) \
-o $(KDIR_TMP)/$(2)-rootfs; \
Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-define MkuImageHiWiFi
- # Field ih_name needs to start with "tw150v1"
- mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
- -e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(3) $(4)
-endef
-
-define MkuImageLzmaHiWiFi
- $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
- $(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
-endef
-
-Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4))
-Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
define Image/Build/PB4X
define Image/Build/Planex
$(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
+ $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
$(STAGING_DIR_HOST)/bin/mkplanexfw \
-B $(2) \
endef
-Image/Build/Seama/loader=$(call Image/BuildLoader,$(1),bin,$(2) $(3),0x80060000)
-
-define Image/Build/Seama
- [ -e "$(KDIR)/loader-$(2).bin" ]
- $(call CompressLzma,$(KDIR)/loader-$(2).bin,$(KDIR_TMP)/loader-$(2).bin.lzma)
- -rm -f $(KDIR_TMP)/image-$(2).tmp
- $(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp)
- [ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \
- head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \
- $(STAGING_DIR_HOST)/bin/seama \
- -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \
- -m "dev=/dev/mtdblock/1" -m "type=firmware"; \
- $(STAGING_DIR_HOST)/bin/seama \
- -s $(call imgname,$(1),$(2))-factory.bin \
- -m "signature=$(5)" \
- -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \
- tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \
- }
- cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp
- $(STAGING_DIR_HOST)/bin/seama \
- -i $(KDIR_TMP)/image-$(2)-sysupgrade.tmp \
- -m "dev=/dev/mtdblock/1" -m "type=firmware"
- $(call CatFiles,$(KDIR_TMP)/image-$(2)-sysupgrade.tmp.seama,$(6),$(KDIR)/root.$(1),$(7),$(call sysupname,$(1),$(2)))
-endef
-
-define Image/Build/Seama/initramfs
- $(call PatchKernelLzma,$(2),$(3) $(4),,-initramfs)
- $(STAGING_DIR_HOST)/bin/seama \
- -i $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \
- -m "dev=/dev/mtdblock/1" -m "type=firmware"
- cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin
-endef
-
Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
if [ -e $(call sysupname,$(1),$(2)) ]; then \
for r in $(7) ; do \
- [ -n "$$$$r" ] && dashr="-$$$$r" || dashr= ; \
+ [ -n "$$r" ] && dashr="-$$r" || dashr= ; \
$(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
+ -B $(6) -v OpenWrt.$(REVISION) -r "$$r" $(8) \
-i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory$$$$dashr.img; \
+ -o $(call imgname,$(1),$(2))-factory$$dashr.img; \
done; \
fi
endef
$(call PatchKernelLzma,$(2),$(3) $(4),-d20)
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
- bs=$$$$(($(kernelsize)-131072-2*64-1)) \
+ bs=$$(($(kernelsize)-131072-2*64-1)) \
count=1 conv=sync
$(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
dd if=$(KDIR_TMP)/$(2)-root.ubi \
) > $(imageraw)
$(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
+ -B $(6) -v OpenWrt.$(REVISION) -r "$$r" $(8) \
-i $(imageraw) \
-o $(call imgname,ubi,$(2))-factory.img
--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
-d $(KDIR_TMP)/$(2)/image \
- 2>&1 1>/dev/null | awk '/^.+$$$$/'
+ 2>&1 1>/dev/null | awk '/^.+$$/'
-rm -rf $(KDIR_TMP)/$(2)
endef
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
+Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),)
define Image/Build/OpenMesh
-sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
"$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
"$(KDIR)/root.$(1)" "rootfs"
+ if [ -e "$(call factoryname,$(1),$(2))" ]; then \
+ cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \
+ fi
endef
$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,WRTNODE2Q,wrtnode2q,WRTNODE2Q,ttyS0,115200,$$(wrtnode2q_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
-$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
-
$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
-$(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,65536,16187392))
-$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,65536,16187392))
-
-$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,65536,16121856))
-
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
$(eval $(call MultiProfile,Madwifi,EAP7660D WP543))
+define LegacyDevice/OM2P
+ DEVICE_TITLE := OpenMesh OM2P/OM2Pv2/OM2P-HS/OM2P-HSv2/OM2P-HSv3/OM2P-LC
+ DEVICE_PACKAGES := kmod-ath9k om-watchdog
+endef
+LEGACY_DEVICES += OM2P
+
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
$(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader)
endef
+define Image/Prepare/Profile
+ $(call Image/Build/Profile/$(1),loader)
+endef
+
+define Image/Build/Profile
+ $(call Image/Build/Profile/$(1),buildkernel)
+ $(call Image/Build/Profile/$(1),$(2))
+endef
+
# $(1): filesystem type.
define Image/Build
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
- $(call Image/Build/Profile/$(IMAGE_PROFILE),$(1))
endef
projects / openwrt / openwrt.git / blobdiff