ath79: Add support for TP-Link CPE210 v3

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 13dce9aa58565ae25f7c8a88e384cbe3d1d11dd4..1041af561e5b2ca72ed63dad7044e74a2fdce410 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -19,6 +19,7 @@ ath79_setup_interfaces()
        pcs,cap324|\
        pisen,wmm003n|\
        pqi,air-pen|\
+       tplink,cpe210-v3|\
        tplink,re350k-v1|\
        tplink,re450-v2|\
        tplink,tl-mr10u|\
@@ -65,6 +66,17 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
                ;;
+       comfast,cf-e5|\
+       glinet,gl-ar150|\
+       glinet,gl-ar300m-nand|\
+       glinet,gl-ar300m-nor|\
+       glinet,gl-x750|\
+       tplink,tl-wr810n-v1|\
+       tplink,tl-wr810n-v2|\
+       ubnt,routerstation|\
+       yuncore,a770)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ;;
        devolo,dvl1200e|\
        devolo,dvl1750e)
                ucidef_set_interface_lan "eth0 eth1"
@@ -98,16 +110,6 @@ ath79_setup_interfaces()
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
-       glinet,gl-ar150|\
-       glinet,gl-ar300m-nand|\
-       glinet,gl-ar300m-nor|\
-       glinet,gl-x750|\
-       tplink,tl-wr810n-v1|\
-       tplink,tl-wr810n-v2|\
-       ubnt,routerstation|\
-       yuncore,a770)
-               ucidef_set_interfaces_lan_wan "eth1" "eth0"
-               ;;
        glinet,gl-ar750s)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:2" "3:lan:1" "1:wan"