ath79: add support for TP-Link CPE510-v2/v3

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 56650c3f6be40a98b5b66b89a9709f4fe6487488..1d4cec025adbe7cf468e08376e8b3a9ca43368cd 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -28,8 +28,12 @@ ath79_setup_interfaces()
        pqi,air-pen|\
        tplink,cpe210-v2|\
        tplink,cpe210-v3|\
+       tplink,cpe510-v2|\
+       tplink,cpe510-v3|\
        tplink,cpe610-v1|\
        tplink,re350k-v1|\
+       tplink,re355-v1|\
+       tplink,re450-v1|\
        tplink,re450-v2|\
        tplink,tl-mr10u|\
        tplink,tl-mr3020-v1|\
@@ -62,7 +66,8 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
                ;;
-       buffalo,bhr-4grv2)
+       buffalo,bhr-4grv2|\
+       trendnet,tew-823dru)
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
                ;;
@@ -361,6 +366,10 @@ ath79_setup_macs()
                base_mac=$(mtd_get_mac_binary u-boot 130048)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;
+       trendnet,tew-823dru)
+               lan_mac=$(mtd_get_mac_text mac 4)
+               wan_mac=$(mtd_get_mac_text mac 24)
+               ;;
        ubnt,routerstation|\
        ubnt,routerstation-pro)
                wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)