ath79: add support for TP-Link CPE510-v2/v3

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 7b89274ccf296e11d38cf20c9a06f8f4cc56439a..1d4cec025adbe7cf468e08376e8b3a9ca43368cd 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -9,11 +9,14 @@ ath79_setup_interfaces()
        local board="$1"
 
        case "$board" in
+       adtran,bsap1800-v2|\
+       adtran,bsap1840|\
        aruba,ap-105|\
        avm,fritz300e|\
        devolo,dvl1200i|\
        devolo,dvl1750c|\
        devolo,dvl1750i|\
+       devolo,dvl1750x|\
        engenius,ecb1750|\
        glinet,ar300m-lite|\
        netgear,ex6400|\
@@ -25,7 +28,12 @@ ath79_setup_interfaces()
        pqi,air-pen|\
        tplink,cpe210-v2|\
        tplink,cpe210-v3|\
+       tplink,cpe510-v2|\
+       tplink,cpe510-v3|\
+       tplink,cpe610-v1|\
        tplink,re350k-v1|\
+       tplink,re355-v1|\
+       tplink,re450-v1|\
        tplink,re450-v2|\
        tplink,tl-mr10u|\
        tplink,tl-mr3020-v1|\
@@ -49,20 +57,35 @@ ath79_setup_interfaces()
        pcs,cr3000|\
        tplink,archer-c58-v1|\
        tplink,archer-c59-v1)
-               ucidef_set_interface_wan "eth0"
+               ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+                       "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
                ;;
        buffalo,bhr-4grv|\
        buffalo,wzr-hp-g450h)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
                ;;
-       buffalo,bhr-4grv2)
+       buffalo,bhr-4grv2|\
+       trendnet,tew-823dru)
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
                ;;
-       buffalo,wzr-hp-ag300h)
+       buffalo,whr-g301n)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       buffalo,wzr-hp-ag300h|\
+       tplink,archer-c25-v1|\
+       tplink,tl-mr3220-v1|\
+       tplink,tl-mr3420-v1|\
+       tplink,tl-wr841-v7|\
+       tplink,tl-wr841-v9|\
+       tplink,tl-wr841-v11|\
+       tplink,tl-wr842n-v1|\
+       tplink,tl-wr842n-v3|\
+       ubnt,airrouter)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
@@ -71,15 +94,10 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
                ;;
-       comfast,cf-e5|\
-       glinet,gl-ar150|\
-       glinet,gl-ar300m-nand|\
-       glinet,gl-ar300m-nor|\
-       glinet,gl-x750|\
-       tplink,tl-wr810n-v1|\
-       tplink,tl-wr810n-v2|\
-       ubnt,routerstation|\
-       yuncore,a770)
+       comfast,cf-e110n-v2|\
+       comfast,cf-e120a-v3|\
+       ubnt,nanostation-m|\
+       ubnt,routerstation)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
        devolo,dvl1200e|\
@@ -126,7 +144,8 @@ ath79_setup_interfaces()
        iodata,wn-ac1600dgr|\
        iodata,wn-ac1600dgr2|\
        iodata,wn-ag300dgr|\
-       pcs,cr5000)
+       pcs,cr5000|\
+       wd,mynet-n750)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
        ;;
@@ -158,7 +177,12 @@ ath79_setup_interfaces()
                ;;
        netgear,wnr612-v2|\
        on,n150r|\
-       tplink,tl-wr841-v7)
+       tplink,tl-wr740n-v1|\
+       tplink,tl-wr740n-v3|\
+       tplink,tl-wr741-v1|\
+       tplink,tl-wr743nd-v1|\
+       tplink,tl-wr841-v5|\
+       tplink,tl-wr941-v4)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
                "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
@@ -167,10 +191,25 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan:1" "5:lan:2" "4:wan"
                ;;
+       qihoo,c301)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan" "3:lan"
+               ;;
        rosinson,wr818)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:wan"
                ;;
+       tplink,archer-a7-v5|\
+       tplink,archer-c6-v2|\
+       tplink,archer-c7-v4|\
+       tplink,archer-c7-v5|\
+       tplink,tl-wdr3600-v1|\
+       tplink,tl-wdr4300-v1|\
+       tplink,tl-wr941n-v7-cn)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+               ;;
        tplink,archer-c5-v1|\
        tplink,archer-c7-v1|\
        tplink,archer-c7-v2|\
@@ -180,28 +219,7 @@ ath79_setup_interfaces()
                ;;
        tplink,archer-d50-v1)
                ucidef_add_switch "switch0" \
-                       "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
-               ;;
-       buffalo,whr-g301n|\
-       tplink,tl-mr3220-v1|\
-       tplink,tl-mr3420-v1|\
-       tplink,tl-wr841-v9|\
-       tplink,tl-wr841-v11|\
-       tplink,tl-wr842n-v3|\
-       ubnt,airrouter)
-               ucidef_set_interface_wan "eth0"
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-               ;;
-       tplink,archer-a7-v5|\
-       tplink,archer-c6-v2|\
-       tplink,archer-c7-v4|\
-       tplink,archer-c7-v5|\
-       tplink,tl-wdr3600|\
-       tplink,tl-wdr4300|\
-       tplink,tl-wr941n-v7-cn)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
                ;;
        tplink,tl-wr1043nd-v1)
                ucidef_add_switch "switch0" \
@@ -216,37 +234,21 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
                ;;
-       tplink,tl-wr740n-v1|\
-       tplink,tl-wr740n-v3|\
-       tplink,tl-wr741-v1|\
-       tplink,tl-wr743nd-v1|\
-       tplink,tl-wr841-v5|\
-       tplink,tl-wr941-v4)
-               ucidef_set_interface_wan "eth0"
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-               ;;
-       tplink,tl-wr710n-v1)
-               ucidef_set_interface_wan "eth0"
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "3:lan"
-               ;;
        tplink,tl-wr740n-v4|\
        tplink,tl-wr741nd-v4|\
        tplink,tl-wr841-v8|\
-       tplink,tl-wr842n-v1|\
        tplink,tl-wr842n-v2)
-               ucidef_set_interface_wan "eth0"
+               ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+                       "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
                ;;
        tplink,tl-wr941-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
        ubnt,acb-isp)
-               ucidef_set_interface_wan "eth0"
+               ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
-                       "0@eth1" "2:lan:1" "3:lan:3" "4:lan:2"
+                       "0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
                ;;
        ubnt,routerstation-pro)
                ucidef_set_interface_wan "eth0"
@@ -257,10 +259,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:lan" "1:wan"
                ;;
+       zbtlink,zbt-wd323|\
        xiaomi,mi-router-4q)
-               ucidef_set_interface_wan "eth0"
+               ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
-                       "0@eth1" "3:lan:1" "4:lan:2"
+                       "0@eth0" "3:lan:1" "4:lan:2"
                ;;
        *)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -273,6 +276,11 @@ ath79_setup_macs()
        local board="$1"
 
        case "$board" in
+       adtran,bsap1800-v2|\
+       adtran,bsap1840)
+               fconfig -s -w -d $(find_mtd_part "RedBoot config") -n boot_cntb -x 0
+               lan_mac=$(mtd_get_mac_binary "Board data" 2)
+               ;;
        avm,fritz300e)
                lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
                ;;
@@ -290,13 +298,14 @@ ath79_setup_macs()
                wan_mac=$(mtd_get_mac_text "mac" 24)
                ;;
        dlink,dir-859-a1|\
-       nec,wg1200cr)
+       nec,wg1200cr|\
+       wd,mynet-n750)
                lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
                wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
                ;;
        elecom,wrc-1750ghbk2-i|\
        elecom,wrc-300ghbk2-i)
-               wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 4098)" -2)
                ;;
        engenius,ecb1750)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
@@ -336,22 +345,20 @@ ath79_setup_macs()
                lan_mac=$(k2t_get_mac "lan_mac")
                wan_mac=$(k2t_get_mac "wan_mac")
                ;;
+       qihoo,c301)
+               lan_mac=$(mtd_get_mac_ascii devdata lanmac)
+               wan_mac=$(mtd_get_mac_ascii devdata wanmac)
+               ;;
        rosinson,wr818)
                wan_mac=$(mtd_get_mac_binary factory 0)
                lan_mac=$(macaddr_setbit_la "$wan_mac")
                ;;
        tplink,archer-a7-v5|\
-       tplink,archer-c7-v5)
-               base_mac=$(mtd_get_mac_binary info 8)
-               wan_mac=$(macaddr_add "$base_mac" 1)
-               ;;
-       tplink,archer-c7-v4)
-               base_mac=$(mtd_get_mac_binary config 8)
-               wan_mac=$(macaddr_add "$base_mac" 1)
-               ;;
+       tplink,archer-c7-v4|\
+       tplink,archer-c7-v5|\
        tplink,tl-wr1043nd-v4|\
        tplink,tl-wr1043n-v5)
-               base_mac=$(mtd_get_mac_binary product-info 8)
+               base_mac=$(mtd_get_mac_binary info 8)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;
        tplink,tl-wr941-v2|\
@@ -359,6 +366,10 @@ ath79_setup_macs()
                base_mac=$(mtd_get_mac_binary u-boot 130048)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;
+       trendnet,tew-823dru)
+               lan_mac=$(mtd_get_mac_text mac 4)
+               wan_mac=$(mtd_get_mac_text mac 24)
+               ;;
        ubnt,routerstation|\
        ubnt,routerstation-pro)
                wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)