ath79: Speed up caldata/eeprom handling

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 45d3819c216e62f53a1e65ba739757b0c36ebc1f..8651c97099be1464e76e370df356558d4b0b1b48 100644 (file)
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -28,7 +28,7 @@ ath10kcal_from_file() {
        local offset=$2
        local count=$3
 
-       dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+       dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
                ath10kcal_die "failed to extract calibration data from $source"
 }
 
@@ -42,7 +42,7 @@ ath10kcal_extract() {
        [ -n "$mtd" ] || \
                ath10kcal_die "no mtd device found for partition $part"
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+       dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
                ath10kcal_die "failed to extract calibration data from $mtd"
 }
 
@@ -51,7 +51,7 @@ ath10kcal_patch_mac() {
 
        [ -z "$mac" ] && return
 
-       macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+       macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1
 }
 
 ath10kcal_patch_mac_crc() {
@@ -88,7 +88,10 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
        devolo,dvl1200e|\
-       devolo,dvl1750c)
+       devolo,dvl1200i|\
+       devolo,dvl1750c|\
+       devolo,dvl1750e|\
+       devolo,dvl1750i)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1)
                ;;
@@ -99,20 +102,19 @@ case "$FIRMWARE" in
        elecom,wrc-1750ghbk2-i)
                ath10kcal_extract "ART" 20480 2116
                ;;
-       glinet,ar750s|\
-       tplink,re450-v2)
-               ath10kcal_extract "art" 20480 2116
-               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-               ;;
-       glinet,gl-x750)
-               ath10kcal_extract "art" 20480 2116
-               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-               ;;
+       engenius,epg5000|\
        iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
                ;;
+       engenius,ews511ap|\
+       glinet,gl-ar750s|\
+       glinet,gl-x750|\
+       tplink,re450-v2)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+               ;;
        nec,wg800hp)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
@@ -125,15 +127,25 @@ case "$FIRMWARE" in
                ath10kcal_extract "ART" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
+       tplink,archer-c2-v3)
+               ath10kcal_extract "ART" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+               ;;
+       tplink,archer-c5-v1|\
        tplink,archer-c7-v2)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
                ;;
        tplink,archer-a7-v5|\
+       tplink,archer-c7-v4|\
        tplink,archer-c7-v5)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
                ;;
+       tplink,re350k-v1)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +2)
+               ;;
        ubnt,unifiac-lite|\
        ubnt,unifiac-mesh|\
        ubnt,unifiac-mesh-pro|\
@@ -143,6 +155,9 @@ case "$FIRMWARE" in
        ubnt,unifiac-pro)
                ath10kcal_extract "EEPROM" 20480 2116
                ;;
+       yuncore,a770)
+               ath10kcal_extract "art" 20480 2116
+               ;;
        esac
        ;;
 "ath10k/pre-cal-pci-0000:00:00.0.bin")
@@ -154,7 +169,8 @@ case "$FIRMWARE" in
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
        tplink,archer-c58-v1|\
-       tplink,archer-c59-v1)
+       tplink,archer-c59-v1|\
+       tplink,archer-c6-v2)
                ath10kcal_extract "art" 20480 12064
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \