ath79: enable UART in SoC DTSI files

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9132_tplink_tl-wr1043nd-v1.dts

diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
index 84d593a965f730e98f2bdd729b6f47e6fb0f3cb9..3b406e4d80daa3c2a88ffd1ddc8159bff699828f 100644 (file)
--- a/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
+++ b/target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts
@@ -1,20 +1,20 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9132.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar9132.dtsi"
-
 / {
        compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
-       model = "TP-Link TL-WR1043ND Version 1";
+       model = "TP-Link TL-WR1043ND v1";
 
        aliases {
-               led-boot = &system;
-               led-failsafe = &system;
-               led-running = &system;
-               led-upgrade = &system;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+               label-mac-device = &eth0;
        };
 
        extosc: ref {
@@ -26,14 +26,14 @@
        keys {
                compatible = "gpio-keys";
 
-               button0 {
+               reset {
                        label = "reset";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
 
-               button1 {
+               qss {
                        label = "qss";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
@@ -43,29 +43,28 @@
 
        leds {
                compatible = "gpio-leds";
+
                usb {
-                       label = "tp-link:green:usb";
+                       label = "green:usb";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        trigger-sources = <&hub_port>;
                        linux,default-trigger = "usbport";
                };
 
-               system: system {
-                       label = "tp-link:green:system";
+               led_system: system {
+                       label = "green:system";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "heartbeat";
                };
 
                qss {
-                       label = "tp-link:green:qss";
+                       label = "green:qss";
                        gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
                };
 
                wlan {
-                       label = "tp-link:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
        };
@@ -80,10 +79,6 @@
        };
 };
 
-&uart {
-       status = "okay";
-};
-
 &pll {
        clocks = <&extosc>;
 };
@@ -105,12 +100,12 @@
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;
+               m25p,fast-read;
 
                partitions {
                        compatible = "fixed-partitions";
@@ -152,6 +147,7 @@
 
 &wmac {
        status = "okay";
+
        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&uboot 0x1fc00>;
 };