ath79: add support for Netgear WNR1000 v2
[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9341_tplink_tl-wr841-v8.dts
index ec89be531887926587347d72da6d09ad1bb73cbc..3577e4994f31887a435760a2ec22d16a5e874182 100644 (file)
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9341.dtsi"
+#include "ar9341_tplink.dtsi"
 
 / {
        model = "TP-Link TL-WR841N/ND v8";
        compatible = "tplink,tl-wr841-v8", "qca,ar9341";
-
-       aliases {
-               serial0 = &uart;
-               led-boot = &system;
-               led-failsafe = &system;
-               led-running = &system;
-               led-upgrade = &system;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               pinctrl-names = "default";
-               pinctrl-0 = <&jtag_disable_pins>;
-
-               reset {
-                       label = "Reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               rfkill {
-                       label = "WiFi";
-                       linux,code = <KEY_RFKILL>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               system: power {
-                       label = "tp-link:green:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               wlan {
-                       label = "tp-link:green:wlan";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               qss {
-                       label = "tp-link:green:qss";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-
-               wan {
-                       label = "tp-link:green:wan";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-               };
-
-               lan1 {
-                       label = "tp-link:green:lan1";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-
-               lan2 {
-                       label = "tp-link:green:lan2";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-
-               lan3 {
-                       label = "tp-link:green:lan3";
-                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-               };
-
-               lan4 {
-                       label = "tp-link:green:lan4";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-       };
 };
 
-&ref {
-       clock-frequency = <25000000>;
-};
-
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
+&keys {
+       reset {
+               label = "Reset";
+               linux,code = <KEY_RESTART>;
+               gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               debounce-interval = <60>;
+       };
 };
 
 &spi {
                };
        };
 };
-
-&eth0 {
-       status = "okay";
-
-       phy-handle = <&swphy0>;
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mtd-mac-address-increment = <(-1)>;
-};
-
-&eth1 {
-       status = "okay";
-
-       mtd-mac-address = <&uboot 0x1fc00>;
-
-       pll-data = <0x06000000 0x00000101 0x00001616>;
-
-       gmac-config {
-               device = <&gmac>;
-               switch-phy-swap = <1>;
-       };
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&uboot 0x1fc00>;
-};