kernel: bump 6.1 to 6.1.89

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9342_ubnt_nanostation-ac.dts

diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts
index 29b6fdab5e59f636eec5cde82a8e96ace2fa7024..264498c85795e53852a256428a2f5794d011ba1a 100644 (file)
--- a/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts
+++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts
@@ -1,78 +1,38 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0-only
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9342_ubnt_wa.dtsi"
+#include "ar9342_ubnt_wa_2port.dtsi"
 
 / {
        compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
        model = "Ubiquiti Nanostation AC (WA)";
 
-       gpio-leds {
+       aliases {
+               led-boot = &led_rssi3;
+               led-failsafe = &led_rssi3;
+               led-upgrade = &led_rssi3;
+       };
+
+       leds {
                compatible = "gpio-leds";
 
                rssi0 {
-                       label = "ubnt:blue:rssi0";
+                       label = "blue:rssi0";
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
 
                rssi1 {
-                       label = "ubnt:blue:rssi1";
+                       label = "blue:rssi1";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
 
                rssi2 {
-                       label = "ubnt:blue:rssi2";
+                       label = "blue:rssi2";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                };
 
-               rssi3 {
-                       label = "ubnt:blue:rssi3";
+               led_rssi3: rssi3 {
+                       label = "blue:rssi3";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
        };
 };
-
-&mdio0 {
-       status = "okay";
-
-       phy-mask = <4>;
-       phy0: ethernet-phy@0 {
-               phy-mode = "rgmii";
-               reg = <0>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x07600000 /* PORT0 PAD MODE CTRL */
-                       0x58 0xffb7ffb7 /* LED_CTRL2 */
-                       0x5c 0x03ffff00 /* LED_CTRL3 */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-               >;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       /* default for ar934x, except for 1000M and 10M */
-       pll-data = <0x06000000 0x00000101 0x00001313>;
-
-       mtd-mac-address = <&eeprom 0x0>;
-
-       phy-mode = "rgmii";
-       phy-handle = <&phy0>;
-
-       gmac-config {
-               device = <&gmac>;
-               rxd-delay = <2>;
-               rxdv-delay = <2>;
-       };
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&eeprom 0x1000>;
-       mtd-mac-address = <&eeprom 0x1002>;
-};