ath79: add support for TP-Link CPE220 v2

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9344_tplink_cpe610-v1.dts

diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
index 8a78dc4fa4548b8da7858d1a8355a58c370b454e..eaf0acc1645714373be0c0e5db4ef4e7d5b9937e 100644 (file)
--- a/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
@@ -1,10 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include "ar9344_tplink_cpexxx.dtsi"
 
 / {
        model = "TP-Link CPE610 v1";
@@ -30,99 +27,6 @@
                        linux,default-trigger = "phy0tpt";
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-
-};
-
-&ref {
-       clock-frequency = <40000000>;
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       num-cs = <1>;
-
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       uboot: partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "partition-table";
-                               reg = <0x020000 0x010000>;
-                               read-only;
-                       };
-
-                       info: partition@30000 {
-                               label = "info";
-                               reg = <0x030000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "firmware";
-                               reg = <0x040000 0x780000>;
-
-                               compatible = "fixed-partitions";
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       label = "kernel";
-                                       reg = <0x000000 0x200000>;
-                               };
-
-                               partition@200000 {
-                                       label = "rootfs";
-                                       reg = <0x200000 0x580000>;
-                               };
-                       };
-
-                       partition@7c0000 {
-                               label = "config";
-                               reg = <0x7c0000 0x030000>;
-                               read-only;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&info 0x08>;
 };
 
 &eth0 {