ath79: wlr-7100: remove device variant indicator

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9533_tplink_cpe210.dtsi

diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
index 5b273d4737ee1c323a6403d09de4361416b1ec08..3295776bf93e48efbc906d68f4a2f06bea687844 100644 (file)
--- a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
@@ -1,135 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca9533_tplink_cpexxx.dtsi"
 
-#include "qca953x.dtsi"
-
-/ {
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               led-boot = &led_system;
-               led-failsafe = &led_system;
-               led-running = &led_system;
-               led-upgrade = &led_system;
-               label-mac-device = &eth0;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan {
-                       label = "tp-link:green:lan";
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
-
-               link1 {
-                       label = "tp-link:green:link1";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-               };
-
-               link2 {
-                       label = "tp-link:green:link2";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-               };
-
-               link3 {
-                       label = "tp-link:green:link3";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-               };
-
-               led_system: link4 {
-                       label = "tp-link:green:link4";
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset_button {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       uboot: partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "partition-table";
-                               reg = <0x020000 0x10000>;
-                               read-only;
-                       };
-
-                       info: partition@30000 {
-                               label = "info";
-                               reg = <0x030000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "firmware";
-                               reg = <0x040000 0x780000>;
-                               compatible = "tplink,firmware";
-                       };
-
-                       config: partition@7c0000 {
-                               label = "config";
-                               reg = <0x7c0000 0x30000>;
-                               read-only;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
+&leds {
+       lan {
+               label = "green:lan";
+               gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
        };
 };
 
-&eth0 {
-       status = "okay";
-       phy-handle = <&swphy4>;
-       mtd-mac-address = <&info 0x8>;
-};
-
 &eth1 {
        compatible = "syscon", "simple-mfd";
 };
-
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&info 0x8>;
-};