ath79: add support for TP-Link RE450 v3

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_tplink_re450-v2.dts

diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
index 16bc26c9781534d5d42e41dad6c05967cad67c78..4446163a50db0dfad8495565b4c6ff03653a1b7a 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts
@@ -1,194 +1,47 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_tplink_re450.dtsi"
 
 / {
        compatible = "tplink,re450-v2", "qca,qca9563";
        model = "TP-Link RE450 v2";
+};
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
+&partitions {
+       partition@0 {
+               label = "u-boot";
+               reg = <0x000000 0x020000>;
+               read-only;
        };
 
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-               mdio-gpio0 = &mdio2;
+       partition@20000 {
+               compatible = "tplink,firmware";
+               label = "firmware";
+               reg = <0x020000 0x5e0000>;
        };
 
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: power {
-                       label = "tp-link:blue:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-
-               wlan2g {
-                       label = "tp-link:blue:wlan2g";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               wlan5g {
-                       label = "tp-link:blue:wlan5g";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               lan_link {
-                       label = "tp-link:green:lan_link";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-
-               lan_data {
-                       label = "tp-link:green:lan_data";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-
-               wps_blue {
-                       label = "tp-link:blue:wps";
-                       gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-               };
-
-               wps_red {
-                       label = "tp-link:red:wps";
-                       gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
-               };
+       partition@600000 {
+               label = "partition-table";
+               reg = <0x600000 0x010000>;
+               read-only;
        };
 
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               power {
-                       label = "Power button";
-                       linux,code = <KEY_POWER>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               leds {
-                       label = "LED control button";
-                       linux,code = <BTN_0>;
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "WPS button";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
+       info: partition@610000 {
+               label = "info";
+               reg = <0x610000 0x020000>;
+               read-only;
        };
 
-       mdio2: mdio {
-               compatible = "virtual,mdio-gpio";
-
-               gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
-                       <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               phy4: ethernet-phy@4 {
-                       reg = <4>;
-                       device_type = "ethernet-phy";
-                       reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
+       partition@630000 {
+               label = "config";
+               reg = <0x630000 0x020000>;
+               read-only;
        };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               compatible = "tplink,firmware";
-                               label = "firmware";
-                               reg = <0x020000 0x5e0000>;
-                       };
-
-                       partition@600000 {
-                               label = "partition-table";
-                               reg = <0x600000 0x010000>;
-                               read-only;
-                       };
 
-                       info: partition@610000 {
-                               label = "info";
-                               reg = <0x610000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@630000 {
-                               label = "config";
-                               reg = <0x630000 0x020000>;
-                               read-only;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x010000>;
-                               read-only;
-                       };
-               };
+       art: partition@7f0000 {
+               label = "art";
+               reg = <0x7f0000 0x010000>;
+               read-only;
        };
 };
-
-&eth0 {
-       status = "okay";
-
-       phy-mode = "sgmii";
-       phy-handle = <&phy4>;
-
-       mtd-mac-address = <&info 0x8>;
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&info 0x8>;
-};