ath79: add support for TP-Link WDR3500 v1

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_tplink_tl-wr1043n.dtsi

diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
index 3f6d48a78684b2b53242bf451b404f6202587287..42b4b6b8c6746ca05aaffd66d4719d0abb5df35b 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
@@ -30,50 +30,42 @@
                wifi_green {
                        label = "tp-link:green:wlan";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
 
                wifi_wps {
                        label = "tp-link:green:wps";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                wan {
                        label = "tp-link:green:wan";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                wan_fail {
                        label = "tp-link:orange:wan";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                lan1 {
                        label = "tp-link:green:lan1";
                        gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                lan2 {
                        label = "tp-link:green:lan2";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                lan3 {
                        label = "tp-link:green:lan3";
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                lan4 {
                        label = "tp-link:green:lan4";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
        };
 
@@ -94,17 +86,6 @@
                        debounce-interval = <60>;
                };
        };
-
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               gpio_usb_power {
-                       gpio-export,name = "tp-link:power:usb";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               };
-       };
 };
 
 &uart {
@@ -115,64 +96,6 @@
        status = "okay";
 };
 
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x020000 0xf30000>;
-                       };
-
-                       info: partition@f50000 {
-                               label = "product-info";
-                               reg = <0xf50000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@f70000 {
-                               label = "config";
-                               reg = <0xf70000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               label = "partition-table";
-                               reg = <0xfc0000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@fd0000 {
-                               label = "logs";
-                               reg = <0xfd0000 0x020000>;
-                               read-only;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "ART";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
 &mdio0 {
        status = "okay";
 
@@ -180,6 +103,7 @@
        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "sgmii";
+               qca,mib-poll-interval = <500>;
 
                qca,ar8327-initvals = <
                        0x04 0x00080080 /* PORT0 PAD MODE CTRL */